Technical information

28 Eaton RF-System - Help

After the positive check of a Code this window will appear and inform about the details of the just

scanned device.

All details (serial number, device type, Software-Version and Hardware-Version) of the device that

results from the Barcode will be displayed and can be rechecked if correct.

Additional the following settings can also be changed:

Name – The name of the device can be edited (max. 21 characters)

Topology area - If available the device can directly be assigned to a Topology area

Replaces device – A virtual or real device can be selected that will be replaced by the scanned

device. Already changed settings to the selected device will be transferred (the selected device will

be removed of the project)

After the desired settings have been made clicking ‚OK‘ or pressing ‚Enter‘ will proceed. The

device will be inserted with the chosen settings and the Barcode-Scan function will be continued.

Clicking ‘Cancel’ will return you to the Barcode-Scan main window without inserting the device.

Display of devices scanned by this function:

Devices that have been inserted by Barcode-Scan will be displayed with a special overlay symbol

( ) to identify them as such. Unless the real device is checked (short scan of the device

property by RF – done automatically during a Scan or Load procedure) the symbol will remain this

way. If this check has been passed successfully the device symbol will be changed to normal and

the device can be loaded.

Commands of the Actions Menu

The

Actions

menu includes the following commands:

Scan

All components are scanned via RF

Scan reception quality

Scans the reception quality of all devices in the project

(Professional version only)

Recalculate all connections

Recalculates the connections (best routing paths) of all

devices