Technical information

32 Eaton RF-System - Help

If you have scanned all desired devices you can click on the „Quit“ button. When using the

standard version the reception quality is scanned and the clean up work is taking part. In the

professional version if you do not scan the reception quality scanning will quit immediately.

When using the standard version some reception quality from the devices is also acquired in

between.

The procedure is working cyclically if there is some time between the normal scanning. This is

necessary and reduces the time for the clean up work.

Scanning the reception quality:

By using the new menu item (Actions -> Scan reception quality) the reception quality of all known

devices can be scanned separately.

Scan reception quality

By using this command the reception quality of all devices on the screen are scanned.

Before you start this sequence you can select if you like to keep previous scanned reception

qualities. If not all existing reception qualities are dismissed.

If you answer with “Yes” only new scanned reception qualities overwrites the old ones. The

reception quality from devices that are not scanned stay.

Termination of reception quality scanning:

1. All reception tables of the main supplied devices are deleted

–

you have to reach all existing

devices with the gateway in order to scan all reception qualities.

2. Step by step all main supplied devices sends out test messages

–

the other main supplied