Technical information

54 Eaton RF-System - Help

Right clicking on a new status connection will offer the possibility to show the connection path like

for any other connection

In this example the Status of ‚SA New 1‘ will be routed over ‚SA New 2‘ to the intelligent device.

Reception quality for all devices

Shows the inter-device reception quality.

The reception quality is depicted in coloured connection lines between the devices:

GREEN very good RF-connection

ORANGE satisfying RF-connection

GREY inadequate wireless connection

none very poor wireless connection or none at all

Should you wish to see the reception quality of a particular device, you can display the reception

quality of this particular xComfort device by right-clicking and opening the Drop Down Menu of this

device and by selecting the item Reception Quality.

NEW:

The ability to display inadequate reception quality is new. Reception quality lines which are shown

in grey are too poor to be transferred successfully to telegrams, but are important as information

for setting routers. In this case the reception quality is in a range which can just about be

understood by the other device. If you place a router between the devices with a grey reception

quality line, we can assume that a connection from the two devices to the router will work.