Technical information

67Eaton RF-System

Every rocker or channel can send the following commands:

: short push at the top of the push-button

: long push at the top of the push-button

: long push at the bottom of the push-button

: short push at the bottom of the push-button

Connecting a pushbutton to a device:

By drawing a line from a pushbutton to the desired device the pushbutton is assigned to this

device.

For a 2-fold pushbutton you have to draw a connection from either the left or right side of the

device icon to assign a connection from the left or right rocker.

If you draw a connection from a 4-fold pushbutton to a device a window pops up which lets you

select the desired rocker (1 to 4) you want to connect.

By using the popup-menu option ‘Settings’ you can see all devices to which a pushbutton has a

connection to.

The pushbuttons of the new generation (from september 2009) also have LED’s for displaying its

state.

You can activate or deactivate the LED function in the setting window of the pushbutton.

Configuration window 1-fold pushbutton: