Technical information

71Eaton RF-System
© 2013 Eaton Electrical Group
1. In the Mode selection box you can set the individual modes (1 to 4)
2. The box top right contains the following command buttons:
OK: Confirms the selected settings and returns to the MRF main window.
OK + Load: Confirms, returns to the MRF main window and immediately loads the
modifications into the device.
Cancel: Discards the modifications entered and returns to the MRF main window.
Info: Opens the Help dialog for Dimming Actuators
Additional settings for mode 2:
For Mode 2 and Mode 3 (channel B) you can carry out additional settings for the switching
contact.