Technical information

80 Eaton RF-System - Help

For further information on the configuration of the Home Manager, please turn to the Help section

of the Eaton Manager RF program.

Analog actuator

General information:

The analog actuator (0-10V or 1-10V) can be used to control and switch different devices. It

provides a 0-10V or 1-10V (max. 20mA) control signal und its functions are similar to the dimming

actuator. With the additional relay loads can also be switched. By using the MRF configuration

window you can enable or disable the relay. It can be controlled by any sensor of the xComfort

product family.

As soon as a Connection has been established between a sensor and an actuator, the actuator

can be configured.

Right-click the analog actuator and select the item Settings in the Drop Down Menu.

Then the configuration window should appear, which usually looks like that: