Technical information

86 Eaton RF-System - Help

Shading: The state of the assigned shutters/shutter groups are displayed and can

also be operated.

Timer programme: The state of the timer programmes are displayed and can also be

configured.

Time and date: The time and date are displayed and can also be changed.

Miscellaneous: A menu containing several configuration options is displayed.

By using the ring shaped sensor wheel you can navigate through the pages. With a short key

press on the ring shaped sensor area you can enter the menu of each page. You now can

navigate up and down through the page menu. A short key press to the menu point „Back“ you

jump one level higher again.

Further information about configuration possibilities and operation of the several pages/functions

you can find by following the links below:

Heating and cooling and the Room Manager

Ventilation and the Room Manager

Shading and the Room Manager

Inputs and the Room Manager

Outputs and the Room Manager

Operation modes and the Room Manager

Timer and the Room Manager

Several settings in the Room Manager

Software download by using the IrDA interface

Timer programme and the Room Manager

Extended functions (Enable by checking the Box in the miscellaneous menu):

Presence simulation on the Room-Manager

Logic functions on the Room-Manager

Scenes on the Room-Manager

New as of Version 6.34:

Room Manager with Safety Function

Room Manager with Energy Function

New from Version 6.35 + new Hardware:

Room-Manager with Bluetooth

New for Version 41a:

Support of the new Switching actuator 10A/16A and the extended Status message