Technical information

90 Eaton RF-System - Help
© 2013 Eaton Electrical Group
Multi-Heating actuator as heating request:
In this configuration the connected channel of the Multi-Heating actuator is only allowed to work in
operation type „heating only“. If the Room-Manager is set to operation type „cooling only“ the set
value for the heating request will be 0°C.
Further possible heating request connections for a room: other channels of Multi-Heating actuator
or Dimplex-Heating-actuators
Possible cooling request connections for a room: only actuators (Switching-, Dimming-, Analog,
Shutter-actuator, Channels of intelligent devices)
Multi-Heating actuator as cooling request:
In this configuration the connected channel of the Multi-Heating actuator is only allowed to work in
operation type "cooling only". If the Room-Manager is set to operation type "heating only" the set
value for the heating request will be 60°C.
Possible heating request connections for a room: only actuators (Switching-, Dimming-, Analog,
Shutter-actuator, Channels of intelligent devices)
Further possible cooling request connections for a room: only other channels of Multi-Heating