Technical information

96 Eaton RF-System - Help

The operation mode (Automatic, Comfort, Standby, Night, Frost-/Heat protection, OFF) and the

operation type (heating only, cooling only, Heating and Cooling) for ON and OFF commands from

the connected sensor can be configured.

The toggle will affect all Rooms simultaneously.

Operation type only:

If this input is used the combined toggle of the operation type with the operation mode is

deactivated.

For OFF and ON commands of the connected sensors the operation type can be set to "none",

"heating only", "cooling only" and "Heating and Cooling".

ATTENTION! If a Multi-Heating actuator is used in any Room it is necessary to set „heating only“

for OFF commands and „cooling only“ for ON commands.

The state of the operation type can now also be sent out by an own output. This output is

necessary if inputs of Multi-Heating actuator are used in the Room-Manager and in that case it

needs to be connected to the “Heating/Cooling” input of the Multi-Heating actuator. It can also be

connected to „Toggle operation type“ inputs of other Room-Managers for synchronization of the

operation type.

The toggle will affect all Rooms simultaneously.