User manual

Intelligent Technologies ( IT. ) D77B-DSNAP
12
Pub. No. MN05004001E
September 2002
Operation
This section provides details about the following features and functions of D77B-DSNAP
operation:
● “Out of box” operation
● Quick Start
● Typical application
● Enhanced features
● DeviceNet input/output assemblies
● DeviceNet Status LED
● Functional Description
“Out of Box” Operation
Note: Before applying power to the D77B-DSNAP for the first time, make sure it is properly
mounted on the starter and that all connections are made (DeviceNet, terminal adapter
and auxiliary connector).
When the D77B-DSNAP is properly installed, and has a properly set baud and MAC ID, per the
“Installation” section on Page 11, the following tables in the Quick Start section indicate the
information to expect for I/O assemblies on DeviceNet.
Quick Start
This part of the section provides the information necessary to install and operate the D77B-
DSNAP on a Full Voltage Non-reversing (FVNR) IT. Starter, Full Voltage Reversing (FVR) IT.
Starter and an S751 Soft Start motor controller. Detailed information is available in Appendix A
for setup of enhanced parameters and extended Input and Output data (assemblies).
FVNR Motor Controller
First, follow the instructions on how to mount the D77B-DSNAP as outlined in Mount the
D77B-DNSAP to the Starter on Page 7.
Second, follow the instruction on how to connect the Starter Terminal Adapter to the starter as
outlined in Connect the Starter Terminal Adapter to the Starter on Page 9.