User manual

Intelligent Technologies ( IT. ) D77B-DSNAP
Pub. No. MN05004001E
31
September 2002
Table 27: Identity Object 0x01
Table 28: DeviceNet Object 0x03 — Instance 1
Attribute Access Data Type Name Value
Instance 1
01 Get UINT Vendor Id 68 [0x44] = Cutler-Hammer
02 Get UINT Device Type 12 [0x0C] = Communication Adapter
22 [0x16] = Motor Starter
23 [0x17] = Soft Starter
03 Get UINT Product Code 4353 [0x1101] DSNAP, FVNR or S751
4354 [0x1102] DSNAP, FVR or two speed
04 Get ARRAY Revision Byte 0 = Major Revision
Byte 1 = Minor Revision
06 Get UDINT Serial Number Serial Number of D77B-DSNAP
09 Get UINT Configuration
Consistency Value
CRC on configuration values
176 Set SHORT
STRING
User Label or
Tag Name
A user established ASCII string of 16 characters or
less
177 Get USINT Fault Value Same as Atrribute 13 of the Control Supervisor
(0x29) Object — Instance 1
Instance 2 (Overload)/Instance 3 (S751)
03 Get UINT Product Code XY 11
X (Motor Controller) Y (Frame Size)
3 = IT. Starter
6 = S751
1 = 27 mm
2 = 45 mm
3 = 54 mm
4 = 76 mm
5 = 105 mm
6 = 140 mm
04 Get ARRAY Revision Byte 0 = Major Revision
Byte 1 = Minor Revision
06 Get UDINT Serial Number Serial Number of connected device
Attribute Access Data Type Name Value
1 Get USINT MAC ID 0 – 63
2 Get USINT Baud Rate 0 = 125K
1 = 250K
2 = 500K
3 Get BOOL BOI
4 Get USINT Bus Off Counter 0 – 255
8 Get USINT MAC ID Switch
9 Get USINT Baud Rate Switch