Technical data

April 2008
PG03300001E For more information visit: www.eaton.com
16-11
Accessories & Modification Codes
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Accessories
Freedom NEMA
Finger Protection Shields
Snap-on shields for both contactors
and starters provide Type IP20 Finger
Protection. Prevents accidental contact
with line/load terminals.
Table 16-34. Product Selection
Adapter to DIN Rail Mount
NEMA 1 – 2 Contactors
Designed to allow DIN rail mounting
of NEMA 1 – 2 contactors. Includes
all hardware required to convert con-
tactors from panel mounting to 35 mm
DIN rail mounting.
Table 16-35. Product Selection
Transient Suppressor Kits
NEMA Sizes 00 – 2
These kits limit high
voltage transients pro-
duced in the control
circuit when power is
removed from the con-
tactor or starter coil.
There are three sepa-
rate suppressors for
use on 24 – 120V, 208 –
240V or 277 – 480V coils
respectively.
These devices mount directly to the
coil terminals of Freedom Series con-
tactors or starters NEMA Sizes 00 – 2
and lighting contactors 10 – 60A.
Reversing devices will require two.
Table 16-36. Product Selection

Suppressor is compatible with coil voltages/
ranges as shown, 50 and 60 Hz.
Application Catalog
Number
NEMA Size 00
NEMA Size 0
C320LS1
C320LS2
NEMA Sizes 1 – 2
Contactors
Reversing Contactors
C320LS3
C320LS4
NEMA Size 1
Starters
Reversing Starters
C320LS5
C320LS6
NEMA Size 2
Starters
Reversing Starters
C320LS7
C320LS8
Description Catalog
Number
Adapter to DIN Rail Mount C320DN65
Description Coil Voltage
50/60 Hz

Catalog
Number
Transient
Suppressor
24 – 120V
208 – 240V
277 – 480V
C320TS1
C320TS2
C320TS3
Cat. No.
C320TS2
NEMA Sizes 3 – 5
This device mounts on
top of any side mounted
auxiliary contact on
Freedom Series NEMA
Sizes 3 – 5 and lighting
contactors 100 – 300A.
It connects across coil terminals on
any 120V contactor or starter magnet
coil (reversing starters or contactors
require 2).
Limits high voltage transients pro-
duced in the circuit when power is
removed from the coil.
Table 16-37. Product Selection
DC/AC Interface Module
The Catalog Number
C320DC Interface
Module is an optically
isolated solid-state
switch which pro-
vides a means of
operating AC coils
with 5 – 48V DC con-
trol signal. It acts as a
space saving interposing relay which
can switch a specified 50/60 Hz AC
source to the contactor or starter coil.
The module may be directly attached
to the coil terminals of any Freedom
Series contactor or starter — NEMA
Sizes 00 – 3 and lighting contactors
10 – 100A. It also has provisions for
DIN rail mounting.
The module will operate coils within the
voltage ranges shown in
Table 16-38 .
Design Characteristics
■ DC Input: 5 – 48V DC at mA nominal
■ AC Operating Voltage:
240V AC (360 VA) ±10% 50/60 Hz;
■ DC Operating Voltage:
30V DC max. (.5A)
■ AC Current Rating
❑ 10A make (inrush)
❑ 1A break (sealed)
Table 16-38. Controller Coil Voltage Ranges
Figure 16-8. Typical Application
Table 16-39. Product Selection
Adhesive Dust Cover
NEMA Sizes 00 – 2
These adhesive stickers come 25 to a
package and provide extra protection
from contaminants when applied to the
sides of Freedom NEMA Sizes 00 – 2.
Adhesive covers are easily applied to
side opening where auxiliaries are not
installed and provide extra protection
from metal filings and other debris.
Table 16-40. Product Selection
Add-On Power Pole Kit
NEMA Sizes 00 – 2
This device mounts on the side of Freedom NEMA Size 00 – 2 contactors. One unit
can be mounted on each side and carries UL, cUL and IEC ratings. The device is
rated for resistive, inductive and lighting applications.
Table 16-41. Product Selection — Add-On Power Pole Kit
Description Coil
Voltage
Catalog
Number
Transient
Suppressor
120V C320AS1
Cat. No. C320DC
Controller Catalog
Number Prefix
Controller
Size or
Rating
Coil
Range
Volts AC
AN16, AN56, CN15,
CN55
00 – 0
1 – 2
3
24 _ 240
48 – 240
110 – 240
CN35 10 – 30A
60A
100A
24 – 240
48 – 240
110 – 240
Coil
Voltage
Catalog
Number
5V DC
6V DC
9V DC
C320DC2V5
C320DC2V6
C320DC2V9
12V DC
48V DC
C320DC2V12
C320DC2V48
Description Catalog
Number
25 to a package C320DSTCVR
24V DC Input
Observe
Polarity
on Module
24 – 240V AC
50/60 Hz
Contactor Coil
Solid-State Switch
UL Ampere Rating IEC 947 Ampere Rating 1NO
Power
Pole
Catalog
Number
Inductive
600V
Resistive
600V
hp
1-Phase
Locked
Rotor
240V
Lighting
Ballast
Tungsten
480V
AC-1
600V
AC-3
600V
AC-5a
AC-5b
480V
115V 230V
15 20 1/2 2 96 20 20 12 18 C320PPD10