PLC, I/O & Communications Products 50-1 PLC, I/O & Communications Products February 2009 Contents Description Page ELC Programmable Logic Controllers ELC Product Family Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ELC Controller Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ELC Right Side Digital Expansion Modules . . . . . . . . . . . . . . . . . . . . . ELC Right Side Analog and Specialty Module . . . . . . . . . . . . . . . . . .
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-2 February 2009 ELC Controllers / Modules ELC Product Family Overview ELC Controller and Expansion Modules The Eaton Logic Controller (ELC) is Eaton’s latest offering into the PLC (Programmable Logic Controller) marketplace. This small sized device, with its abundant module selection, provides all of the big PLC features you need at a micro PLC price.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-3 February 2009 ELC Controllers / Modules Catalog Number Selection Table 50-1.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-4 February 2009 ELC Controllers / Modules Specifications ELC Controllers PB Controller PC and PH Controllers PA Controller PV Controller Figure 50-1. ELC Controllers Table 50-2. ELC Controller Features and Specifications Controller ELC-PB14NNDR/DT Dimensions W x H x D (mm) 25.2 x 90 x 60 I/O Type — Embedded 14 (8DI/6DO) ELC-PA10AADR/DT ELC-PC12NNAR/DR/DT ELC-PH12NNDT ELC-PV28NNDR/DT 37.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-5 February 2009 ELC Controllers / Modules ELC Right Side Digital Expansion Modules Digital right side expansion modules can be used with any ELC controller. They simply snap together to allow the ELC backplane to pass through each connected module. Add only the amount of I/O you need. Choose I/O counts as small as 6 points and as large as 16 points per module.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-6 February 2009 ELC Controllers / Modules ELC Right Side Analog and Specialty Modules These modules offer various features other than the standard digital inputs and outputs. A maximum of 8 analog and specialty I/O modules can be used with any controller. The RS-485 connection device can be used separately from the ELC controllers.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-7 February 2009 ELC Controllers / Modules DOG COM1 3 3 2 0 x10 LSP LSN A B PG0 ELC-MC01 CLR COM2 ELC-EX485APTR ON 1 2 3 4 DR1 DR0 IN1 IN0 ELC-CODNET ELC-COPBDP STOP 1 x10 6 DIP 1 6 5 0 5 s START 9 x160 X7 4 6 2 1 4 X6 3 5 8 NODE ADDRESS x161 s L.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-8 February 2009 ELC Controllers / Modules ELC Left Side Specialty Modules Left side specialty modules connect to a high-speed bus located on the left of the PV controller. A single PV processor can support up to 8 left side specialty modules and in any combination desired. This is in addition to the right side analog, specialty and digital I/O modules. ■ ■ program monitoring.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-9 February 2009 ELC Controllers / Modules ELC Power Supplies All ELC controllers, analog and specialty expansion modules operate from 24V DC. These power supplies provide a convenient way to provide robust DC voltage for ELC and other products. L L N N 24V 24V 0V 0V POWER POWER ELC-PS02 ELC-PS01 Figure 50-6. ELC Power Supplies Table 50-6.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-10 February 2009 ELC Controllers/Modules ELC Programming Software ELCSoft programming software configures all ELC controllers. With ELCSoft, applications can be created, edited and monitored. Move programs from one controller to another with ease. Program in ladder, sequential function chart, or instruction language. ELCSoft is the single program to develop ELC controller applications.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-11 February 2009 ELC Controllers / Modules Product Selection Table 50-7. ELC Controllers (PB, PC, PA, PH, PV) AC DC Analog Relay Transistor Analog Max.
50-12 PLC, I/O & Communications Products ELC Programmable Logic Controllers February 2009 ELC Controllers / Modules Standards and Certifications Table 50-13.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-13 February 2009 ELC Controllers/Modules Dimensions 2.75 (70.0) ELC-PV28NNDR POWER RUN ERROR BAT. LOW 4.31 (109.4) 3.98 (101.0) IN S S OUT C0 X0 Y0 X1 Y1 X2 Y2 2.36 (60.0) X3 RS-232 RS-495 IN 0.12 (3.0) 2.09 (53.2) OUT 0 1 2 10 11 12 0 1 2 10 11 12 3 4 5 6 7 13 14 15 16 17 3 4 5 6 7 13 RUN X4 C1 X5 Y3 X6 Y4 X7 Y5 S C2 S X10 Y6 X11 Y7 X12 Y10 3.54 (90.
50-14 PLC, I/O & Communications Products ELC Programmable Logic Controllers February 2009 ELC Controllers/Modules 2.36 (60.0) 1.47 (37.4) .12 (3.0) POWER RUN ERROR BAT.LOW RUN STOP EXTENSION PORT 3.54 (90.0) .12 (3.0) Figure 50-8. ELC-PA10, ELC-PC12 and ELC-PH12 Controllers — Approximate Dimensions in Inches (mm) 0.99 (25.2) 0.99 (25.2) 2.36 (60.0) 50 3.54 (90.0) 2.36 (60.0) .12 (3.0) .12 (3.0) EXTENSION PORT 3.54 (90.0) EXTENSION PORT .12 (3.0) .12 (3.0) Figure 50-9.
PLC, I/O & Communications Products ELC Programmable Logic Controllers 50-15 February 2009 ELC Controllers/Modules Figure 50-11. ELC Left Side Communications Modules ELC-CODNETM and ELC-COENETM — Approximate Dimensions in Inches (mm) L 3.54 (90.0) N 50 24V 0V POWER ELC-PS01 0.12 (3.0) 1.44 (36.5) 13.3 (0.52) 2.36 (60.0) Figure 50-12. ELC-PS01 Power Supply — Approximate Dimensions in Inches (mm) CA08102001E For more information visit: www.eaton.
50-16 PLC, I/O & Communications Products ELC Programmable Logic Controllers February 2009 ELC Controllers/Modules 0.12 (3.0) 2.17 (55.0) 13.3 (0.52) 2.36 (60.0) L 3.94 (100.0) N 3.54 (90.0) 24V 0V POWER ELC-PS02 0.12 (3.0) 1.28 (32.5) Figure 50-13. ELC-PS02 Power Supply — Approximate Dimensions in Inches (mm) 50 Figure 50-14. ELC-ACPGMXFER Storage Device — Approximate Dimensions in Inches (mm) For more information visit: www.eaton.
PLC, I/O & Communications Products 50-17 February 2009 PC/HMI COM Port 9 PIN D-SUB Female PLC COM1 Port 8 PIN MINI DIN Rx 2 5 Tx Tx 3 4 Rx 5 8 GND 1,2 5V GND 1 7 4 8 2 5 8 1 4 7 3 6 6 Figure 50-15. ELC-CBPCELC1 Cable (Right Angle Connector not Shown) and ELC-CBPCELC3 Cable (Straight Connector as Shown) 3.54 (90.0) 1.14 (29.0) 2.64 (67.0) M3 p0.5 4 Places 3.60 (91.5) 7.09 (180.0) 50 1.81 (46.0) 1.73 (44.0) Figure 50-16.
50-18 PLC, I/O & Communications Products ELC Programmable Logic Controllers February 2009 ELC Controllers/Modules .12 (3) 3.94 (100) .27 (6.8) 3.54 (90) 4.20 (106.8) .12 (3) .28 (7) 2.51 (63.4) Figure 50-17. ELC-ACCOVER Plate Mount for Specialty Modules — Approximate Dimensions in Inches (mm) 50 For more information visit: www.eaton.
PLC, I/O & Communications Products IT. Connect 50-19 February 2009 Starter Network Adapters (SNAP) (D77B Series) — DeviceNet SNAP DeviceNet Starter Network Adapter Product (DSNAP) With the addition of a D64 zero sequence CT, the DSNAP can be enabled to detect ground faults for added protection. Features Table 50-17. IEC SNAP Connectivity IEC E101, E501 Frame 45 mm Size Continuous Ampacity Rating B 18 Amp 25 Amp ■ Communication to DeviceNet consuming one DeviceNet MAC ID.
50-20 PLC, I/O & Communications Products IT. Connect February 2009 Starter Network Adapters (SNAP) (D77B Series) — DeviceNet SNAP Standards and Certifications Dimensions Approvals Description Side Front Table 50-20.
PLC, I/O & Communications Products IT. Connect 50-21 February 2009 Starter Network Adapters (SNAP) (D77B Series) — QCPort SNAP QCPort Starter Network Adapter Product (QSNAP) used for customers who need the extra security of manual control in conjunction with industrial network communication capabilities. With the addition of a D64 zero sequence CT, the QSNAP can be enabled to detect ground faults for added protection.
50-22 PLC, I/O & Communications Products IT. Connect February 2009 Starter Network Adapters (SNAP) (D77B Series) — QCPort SNAP Standards and Certifications Dimensions Approvals Table 50-27. Approvals/Certifications Description Front Side 1.0 (26) 1.
PLC, I/O & Communications Products IT. Connect 50-23 February 2009 Communication Adapters (D77D Series) — DeviceNet Adapter Features, Functions and Benefits ■ ■ ■ ■ ■ Communication to DeviceNet consuming one DeviceNet MAC ID. Provides for control of all IT. communicating devices connected to the gateway. Manually set to MAC ID and baud rate; configuration using a software application is not required for normal operation.
50-24 PLC, I/O & Communications Products IT. Connect February 2009 Communication Adapters (D77D Series) — DeviceNet Adapter Technical Data and Specifications Dimensions Table 50-31. DeviceNet Specifications Description Specification DeviceNet Connections Group 2, Polling, Bit Strobe, Explicit, No UCMM Maximum DeviceNet I/O Size 128 Bytes Input 128 Bytes Output DeviceNet Baud Rate 125K, 250K, 500K QCPort Channels 2 Independent Channels 3.5 (90) Table 50-32.
PLC, I/O & Communications Products IT. Connect 50-25 February 2009 Communication Adapters (D77D Series) — Modbus Adapter Features, Functions and Benefits ■ ■ ■ ■ ■ ■ ■ Cat. No. D77D-EMA Product Description The Cutler-Hammer Intelligent Technologies (IT). Ethernet Modbus Adapter (D77D-EMA) from Eaton’s electrical business has greatly increased the functionality of CutlerHammer IT. communicating products, allowing monitoring and control for IT. motor control devices.
50-26 PLC, I/O & Communications Products IT. Connect February 2009 Communication Adapters (D77D Series) — Modbus Adapter Dimensions 3.5 (90) .9 (22.5) 2.7 (68) Figure 50-24. D77D-EMA — Approximate Dimensions in Inches (mm) Product Selection Table 50-37. Modbus Adapter Product Selection Module Module Module Module 2 (50.8) Module 2 (50.8) 2 (50.8) Description Catalog Number Modbus Adapter D77D-EMA Price U.S. $ 2 (50.8) Figure 50-25.
PLC, I/O & Communications Products IT. Connect 50-27 February 2009 Communication Adapters (D77D Series) — EtherNet/IP Adapter Features, Functions and Benefits ■ ■ ■ ■ ■ ■ Cat. No. D77D-EIP Product Description Communication to EtherNet/IP consuming one address. Supports Boot P, DHCP and static IP addressing. 10/100 BaseT Connection. Provides for control of all IT. communicating devices connected to the network adapter.
50-28 PLC, I/O & Communications Products IT. Connect February 2009 Communication Adapters (D77D Series) — EtherNet/IP Adapter Dimensions 3.5 (90) .9 (22.5) 2.7 (68) Figure 50-26. D77D-EIP — Approximate Dimensions in Inches (mm) Product Selection Table 50-41. EtherNet/IP Adapter Product Selection Module Module Module Module 2 (50.8) Module 2 (50.8) 2 (50.8) Description Catalog Number Modbus Adapter D77D-EIP Price U.S. $ 2 (50.8) Figure 50-27.
PLC, I/O & Communications Products IT. Connect 50-29 February 2009 Communication Adapters (D77D Series) — PROFIBUS Adapter Features, Functions and Benefits ■ ■ ■ ■ ■ ■ ■ Communication to PROFIBUS consuming one address. Supports hardware addressing. DB9 Connection. Modbus slave connections on motherboard. Provides for control of all IT. communicating devices connected to the network adapter. PROFIBUS supports autobaud.
50-30 PLC, I/O & Communications Products IT. Connect February 2009 Communication Adapters (D77D Series) — PROFIBUS Adapter Accessories Table 50-45.
PLC, I/O & Communications Products IT. Connect 50-31 February 2009 Communication Adapters (D77D Series) — PROFIBUS Adapter Dimensions 3.5 (90) 1.8 (45) 2.7 (68) Figure 50-28. D77D-PNA — Approximate Dimensions in Inches (mm) Product Selection Table 50-46. PROFIBUS Adapter Product Selection Module Module Module Module 2 (50.8) Module 2 (50.8) 2 (50.8) Description Catalog Number PROFIBUS Adapter D77D-PNA Price U.S. $ 2 (50.8) Figure 50-29.
50-32 PLC, I/O & Communications Products IT. Connect February 2009 CH Studio Component Manager Software Configure Eaton’s Cutler-Hammer Control Devices Configure Other DeviceNet Products CH Studio provides the capacity to configure and monitor all DeviceNet products that are supported by a published EDS file, regardless of vendor.
PLC, I/O & Communications Products IT. Connect 50-33 February 2009 CH Studio Component Manager Software Features, Functions and Benefits Technical Data and Specifications Studio provides powerful features: ■ ■ ■ ■ ■ ■ ■ ■ ■ Fast discovery of devices on DeviceNet, Modbus/TCP and Ethernet/IP networks. “Snapshot” storage of an entire networks worth of device parameters with just one mouse-click. Rapid configuration of IT.
50-34 PLC, I/O & Communications Products February 2009 50 For more information visit: www.eaton.
