Firmware Manual

Chapter 8—Multi-Purpose Application

104 PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com

Notes

Parameter value can only be changed after the drive has stopped.

Parameter value will be set to be default when changing macros.

M32 PID1 Error Value Varies 0.00 20

M33 PID1 Output % 0.00 22

M34 PID1 Status 0 23 0 = Stopped

1 = Running

2 = Sleep Mode

M35 PID2 Set Point Varies 0.00 32

M36 PID2 Feedback Varies 0.00 34

M37 PID2 Error Value Varies 0.00 36

M38 PID2 Output % 0.00 38

M39 PID2 Status 0 39 See M34

M40 Running Motors 0 26

M41 PT100 Temperature °C 1000.0 27

Table 91. Monitor—M, continued

Code Parameter Min. Max. Unit Default ID Note