Firmware Manual

Chapter 4—Startup
PowerXL DG1 Series Adjustable Frequency Drives MN040004EN—March 2014 www.eaton.com 29
Application Macro Mini-Wizard
Multi-Pump and Fan Control Mini-Wizard
Table 11. Multi-Pump and Fan Control
PID Mini-Wizard
The PID Mini-Wizard is activated in the Quick Setup menu.
This Wizard assumes that you are going to use the PID
controller in the “one feedback/one setpoint” mode. The
control place will be I/O A and the default process unit “%”.
The PID Mini-Wizard asks for the following values to be set:
Table 12. PID Mini-Wizard Values
Item Description
16 PID 1 Process Unit Select Units
17 PID 1 Set Point 1 Source Select Function
18 PID 1 Keypad Set Point 1 Min: PID 1 Process Unit Min
Max: PID 1 Process Unit Max
19 PID 1 Feedback 1 Source Select Input
20 PID 1 Feedback 1 Min Min: –200%
Max: 200%
21 PID 1 Feedback 1 Max Min: –200%
Max: 200%
22 Motor Number Min: 1
Max: 5
23 Bandwidth Min: 0%
Max: 100%
24 Bandwidth Delay Min: 0s
Max: 3600s
25 Interlock Enable 0 = Disabled
1 = Enabled
Item Description
16 PID 1 Process Unit Select Units
17 PID 1 Set Point 1 Source Select Function
18 PID 1 Keypad Set Point 1 Min: PID 1 Process Unit Min
Max: PID 1 Process Unit Max
19 PID 1 Feedback 1 Source Select Input
20 PID 1 Feedback 1 Min Min: –200%
Max: 200%
21 PID 1 Feedback 1 Min Min: –200%
Max: 200%