Technical Bulletin

BACnet MS/TP—On-Board Communication

PowerXL DG1 Series VFD MN040010EN—May 2014 www.eaton.com 77

Analog Value Object Instance Summary

The following table summarizes the Analog Value Objects

supported.

Table 99. Analog Value Object Instance Summary

Note: For Present Value Access Types, R = Read-only,

W = Writeable, C = Commandable. Commandable

values support priority arrays and relinquish defaults.

Instance ID Object Name Description Units

Preset Value

Access

AV0 Frequency Set point Frequency Set point Hz R

AV1 Output Frequency Output Frequency Hz R

AV2 Motor Speed Motor Speed Rpm R

AV3 Motor Load Motor Load Percent R

AV4 Megawatt Hours total Megawatt Hour Counter (Total) MWh R

AV5 Motor Current Motor Current Amps R

AV6 DC link Voltage DC link Voltage Volts R

AV7 Motor Voltage Motor Voltage Volts R

AV8 Unit Temperature Heatsink Temperature °C R

AV9 Motor Torque In% of motor nominal Torque Percent R

AV10 Operating Days Operating Days (resettable) Day R

AV11 Operating Hours Operating Hours (resettable) Hour R

AV12 Torque Reference Torque Reference Percent R

AV13 Motor Temperature Motor Temperature Percent R

AV14 Active Fault Code Latest Active Fault Code No Units R

AV15 Speed Reference Motor speed reference from network Hz C

AV16 Current Limit Current Limit Amps W

AV17 Min Frequency Minimum Frequency Hz W

AV18 Maximum Frequency Maximum Frequency Hz W

AV19 Accel Time 1 Acceleration Time seconds W

AV20 Decel Time 1 Deceleration Time seconds W

AV21 AnyParam ID Parameter ID number to be accessed No Units W

AV22 AnyParam Value Value of parameter defined by AV21 No Units W

AV23 Analog Input 1 Analog Input 1 Volts R

AV24 Analog Input 2 Analog Input 2 Volts R

AV25 Analog Output 1 Analog Output 1 Volts R

AV26 Analog Output 2 Analog Output 2 Volts R