Full Product Manual
Volume 2—Commercial Distribution CA08100003E—April 2016 www.eaton.com V2-T1-27
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.1
Switching Devices
Safety Switches
All general-duty switches
above 100A and all heavy-
duty switches incorporate
these K-Series switch
design features.
●
Two points of contact
provide a positive
open and close, easier
operation, and also help
prevent contact burning
for longer contact life
Visible Double-Break Rotary
Blade Mechanism
●
Protects against accidental
contact with energized
parts. Probe holes enable
the user to test if the line
side is energized without
removing the shield.
Not typically provided
on general-duty switches,
but available as a field kit
or factory installed
Clear Line Shield
●
Provide easy removal
of fuses
Built-In Fuse Pullers (NEMA 12
and 4X 30–200A Only)
Clearly Visible Handle
●
The position (ON or OFF)
can be clearly seen from
a distance and the length
provides for easy operation
Triple Padlocking Capability
●
Personnel safety feature
because the large hasp can
accommodate up to
three 3/8-inch (9.5 mm)
shank locks
Additional Locking Capability
●
Cabinet door can be further
padlocked at the top and
bottom as applicable
Interlocking Mechanism
●
Door cannot be opened
when the handle is in the
ON position. Front and
side operable defeater
mechanism provides
for user access when
necessary on single-
throw switches
Tangential Knockouts
●
An ample number are
provided on the top,
bottom and sides of both
NEMA Types 1 and 3R
enclosures through 200A
Bolt-On Hub Kits
●
For switches in a NEMA
Type 3R, 30–200A. Use
a Myers type hub for
all others
Standards and Certifications
●
UL listed File No. E5239
●
Meets UL 98 for enclosed
switches and NEMA Std.
KS-1