Installation Guide

Eaton Electrical Inc. strongly recommends that these

products be installed by a qualiﬁed electrician.

IMPORTANT - INSTALL EQUIPMENT IN CONFORMANCE

WITH CODES

This product must be installed in accordance with the National

Electric Code (NEC) or the Canadian Electrical Code (CEC0 and

any applicable local codes. Before installing equipment, check

with your local electrical inspector for requirements and infor-

mation. If you have questions or need assistance, contact a

qualiﬁed electrician.

Installation and Operation Instructions for the Deckhand

Rev. 1 2/26/14

Turn off or disconnect the power supplying this

equipment before beginning work.

This may require that you contact your electric utility to

disconnect power to an existing load-center. The line

side of the main breaker is energized unless power is

disconnected upstream. Eaton Electrical, Inc. will not

assume responsibility for property damage or personal

injury resulting from misuse of the information in this

publication.

Hazardous voltage. Can cause severe in-

jury or death.

Turn off main power before opening panel.

PAGE 1
Installation and Operation Instructions for the Deckhand Rev. 1 2/26/14 Hazardous voltage. Can cause severe injury or death. Eaton Electrical Inc. strongly recommends that these products be installed by a qualified electrician. Turn off main power before opening panel. IMPORTANT - INSTALL EQUIPMENT IN CONFORMANCE WITH CODES This product must be installed in accordance with the National Electric Code (NEC) or the Canadian Electrical Code (CEC0 and any applicable local codes.
PAGE 2
Dimensions Installation Note We strongly recommend that a qualified electrical contractor install this unit. Accessing the Unit Note Always use stainless steel mounting hardware. With the circuit breaker access cover open, remove the 8-32 stainless steel screw located just below the circuit breakers. The will allow for removal of the circuit breaker dead-front cover.
PAGE 3
Figure 2 Figure 3 Eaton Marina Power & Lighting Warranty Information Our Quality Pledge Eaton is dedicated to developing and manufacturing the highest quality products while keeping true to our corporate ethics. Our warranty is one way that we strive to be the most admired company in our markets. Product Warranties To obtain warranty service, discuss extended warranties, or for questions contact us at www.marinapower.com or call us at 1-800258-8800.