Electrical Sector Solutions Volume 13: Counters, Timers and Tachometers
Volume 13—Counters, Tachometers and Timers Tab 1—Counters, Panel Meters, Tachometers and Timers . . . . . . .
Copyright Dimensions, Weights and Ratings Dimensions, weights and ratings given in this catalog are approximate and should not be used for construction purposes. Drawings containing exact dimensions are available upon request. All listed product specifications and ratings are subject to change without notice. Photographs are representative of production units. Terms and Conditions All prices and discounts are subject to change without notice.
Introduction Eaton is a global leader in power distribution, power quality, control and automation, and monitoring products. At Eaton, we believe a reliable, efficient and safe power system is the foundation of every successful enterprise. Through innovative technologies, cutting-edge products and our highly skilled services team, we empower businesses around the world to achieve a powerful advantage.
Introduction Contact Us If you need additional help, you can find contact information under the Customer Care heading of Eaton.com/electrical. ii Volume 13—Counters, Panel Meters, Tachometers and Timers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers CS Series Stroke Counter 1.1 Totalizers Mechanical Totalizers (Stroke) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Totalizers (Revolution) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical Totalizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic Totalizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 1.3 1.4 1.6 1.
1.1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Contents Totalizers Description 1 Page Totalizers Product Selection Guide . . . . . . . . . . . . . . . . . Mechanical Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revolution . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical . . . . . . . . . . . . . . . . . . . . . . Electronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counters, Panel Meters, Tachometers and Timers Totalizers 1.
1.1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Contents Mechanical Totalizers (Stroke) Description 1 Mechanical Totalizers (Stroke) X Series/Pushbutton Desk Tally . . . . . . . . . . . . CS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Totalizers (Revolution) . . . . . . . . . . . . Electromechanical Totalizers . . . .
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 X Series/Pushbutton Desk Tally 1 Product Description X Series Counters Model X Series is a dustproof and rustproof series of counters for light and medium-duty work. They are sound and durable, requiring a minimum of driving effort, and have been especially designed for incorporation as integral parts of a variety of machines and equipment.
1.1 Counters, Panel Meters, Tachometers and Timers Totalizers 1 Technical Data and Specifications 1 General Specifications Description Specification 1 Figures 4 or 5 1 Speed 1000 cpm Shaft 0.125 in (3.2 mm) diameter stainless steel 1 Drive Drive parts of nylon Bearings Oil-less, maintenance free 1 Finish Black frame and Cycolac black cover 1 Stroke operation 33° minimum; 58° maximum 1 Figure size 3/16 in (4.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 CS Series 1 Product Description 1 Model CS Series of small, compact, top reading stroke counters is designed for use in most industrial applications. These counters are ruggedly built and feature a single casting case, which assures great rigidity and a tight seal for working parts.
1.1 1 1 Totalizers Dimensions Approximate Dimensions in Inches (mm) CS Series 1 1 Counters, Panel Meters, Tachometers and Timers Dia. 0.156 4 Mtg. Holes 0.47 (11.9) 0.73 (18.6) D 0.42 (10.7) 1 1 Stroke 37.5° Min. – 75° Max. 0.50 (12.7) 1 0.92 (23.4) 1 1 1.25 (31.8) 1 1 1 1 Model A B 2.09 (53.1) 0.22 (5.6) 1.25 (31.8) 1.69 (42.9) 1.00 (25.4) 1 1 1.34 (34.1) Dia. 0.25 (6.35) 1.19 (30.2) A B C 0.56 (14.3) C D 4-CS-1_ 3.12 (79.2) 3.50 (88.9) 4.03 (102.3) 1.87 (47.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 H Series 1 Product Description Model H Series heavy-duty counters are designed for hard usage and long, troublefree service. They are high speed, streamlined counters constructed of the highest quality materials and drive shaft moves in oil-less bearings. All shafts are stainless steel. The drive action is designed with overstroke so counter does not bottom, increasing life and permitting easier installation.
1.1 Counters, Panel Meters, Tachometers and Timers Totalizers 1 Technical Data and Specifications 1 Direction Location for 5H5 and 5H6 1 A C B D 1 1 1 1 1 General Specifications Description Specification 1 Figures 5 Speed 800 cpm 1 Stroke operation 37° stroke to count; 60° maximum stroke Shaft 0.31 in (7.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 D Series 1 Product Description Model D Series are mediumduty stroke counters available with 4, 5 or 6 figures that have been designed for general service on small production machines. 1 Although compact, “D” models are sturdily constructed and thoroughly tested for accuracy and efficient operation.
1.1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Dimensions Approximate Dimensions in Inches (mm) D Series 1 C 0.62 (15.7) 1 1 1.72 (43.6) 1 1 1 1 1 1 0.50 (12.7) Dia. 0.12 (3.05) 4 Mtg. Holes 1.25 (31.8) A 1.62 (41.3) B 1.87 (47.6) Model A B C 4-D-1-1_ 1.59 (40.4) 2.20 (55.9) 1.20 (30.6) 5-D-1-1_ 1.92 (48.8) 2.53 (64.3) 1.51 (38.5) 6-D-1-1_ 2.26 (57.5) 2.87 (73.0) 1.83 (46.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Contents Mechanical Totalizers (Revolution) Description Mechanical Totalizers (Stroke) . . . . . . . . . . . . . . . . Mechanical Totalizers (Revolution) X Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDW Series . . .
1.1 1 1 1 1 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers X Series Product Description Model X Series are dust- and rust-proof counters designed for small, medium-duty units, accurate, durable and require a minimum of driving effort. They are especially designed for incorporation as integral parts of a variety of equipment that gets severe usage under adverse climatic conditions.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 4 or 5 Speed 1000 cpm in 1:1 ratio; 1 1 10,000 cpm in 10:1 ratio for intermittent duty Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Ratio 1:1 and 10:1 standard in 4-X-7 models 1 1 10:1 standard in 5-X-7 models Shaft 0.125 in (3.2 mm) diameter stainless steel; standard length 0.44 in (11.
1.1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers CS Series Product Description This provides greater rigidity, tighter seal of working parts and more streamlined contour. The unit is compact, rugged and features a flush mounted window to assure greater visibility. Model CS Series top reading revolution counters are designed for use in most industrial applications. The entire case is a single casting.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 4 or 5 Speed 600 cpm in 1:1 ratio 1 Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Ratio 1:1 standard Shaft 0.25 in (6.4 mm) diameter stainless steel; standard length 1 in (25.4 mm) Drive Spur gear Bearings Oil-less, maintenance free 1 1 1 Figure size 11/32 in (8.
1.1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers D-7 Series Product Description recommended for braiding machines, low-speed coil winders, wire measuring equipment and all mediumduty revolution applications. Model D-7 Series spur gear end drive units are compact counters that meet a variety of needs.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 5 standard Speed Up to 800 cpm in 1:1 ratio 1 Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Ratio 1:1 standard Shaft 0.31 in (7.9 mm) diameter stainless steel; 0.66 in (16.7 mm) right-hand drive, 0.63 in (15.
1.1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers D-6 Series Product Description adapted as accessory equipment on machinery where right-angle drive is desired to permit full view reading of the counter. Model D-6 right-angle worm drive counters are ruggedly designed for high speeds on light-duty applications.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 5 or 6 Speed Up to 1500 cpm in 1:1 ratio 1 1 Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Ratio 1:1 standard Shaft 0.31 in (7.9 mm) diameter stainless steel; 1.25 in (31.8 mm) length standard Drive Worm drive Bearings Oil-less, maintenance free 1 1 Figure size 1/4 in (6.
1.1 1 1 1 1 1 1 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers HDW Series Product Description eliminate slipping. They are particularly recommended for quick starting and stopping machines, such as coil winders and wire measuring or reeling equipment and on applications where continuous high speed measuring is required.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 5 Speed Up to 2000 cpm 1 Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Ratio 1:1 only Shaft 0.31 in (7.9 mm) diameter stainless steel; standard length 2 in (50.8 mm) Drive Right- or left-hand drive Bearings Oil-less, maintenance free 1 1 1 Figure size 11/16 in (17.
1.1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers T Series Product Description 1 Product Selection 1 When Ordering Specify To determine a model number from the Product Selection table for Model T Series Revolution Counters, consider: 1 1 1 1 heavy machines, engines or motors. Variety of drive permits direct connection. Suitable for panel mounting.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 5 standard Speed 1500 cpm in 1:1 ratio 1 1 Rotation direction Clockwise or anti-clockwise determined top looking down Ratio 1:1 standard Shaft 0.31 in (7.9 mm) diameter stainless steel; standard extends 2 in (50.
1.1 1 1 1 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers H Series Product Description Model H Series are heavyduty, end drive revolution counters designed for industrial use; suitable for speeds up to 800 cpm. They are available with either rightor left-hand drive, and with wing nut reset.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Technical Data and Specifications 1 General Specifications 1 Description Specification Figures 5 Speed Up to 800 cpm 1 Rotation direction Clockwise or anti-clockwise when viewed from right-hand end of counter Shaft 0.31 in (7.9 mm) diameter stainless steel; standard length 2 in (50.8 mm) Drive Right- or left-hand drive Bearings Oil-less, maintenance free Figure size 11/32 in (8.
1.1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Contents Electromechanical Totalizers Description 1 Mechanical Totalizers Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical Totalizers Micro Display Counter . . . . . . . . . . . . . . . . . . . SE Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Micro Display Counter Product Description Features Eaton’s micro display counter is perfect for 12 Vdc applications where small size is important.
1.1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Dimensions Approximate Dimensions in Inches (mm) Micro Display Counter 1 0.08 (2) 1 1 0.04 (1.1) 0.51 x 1.18 (13 x 29.9) 1.26 (32) Rmax 0.02 (0.5) 0.59 (15) 1 1 0.12 (3) Max. 0.59 (15) 1 1.18 +0.01 (30 +0.3) 0.51 +0.02 (13 +0.5) 1.29 (32.7) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-30 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 SE Series Product Description Features Compact electromechanical counters.
1.1 Counters, Panel Meters, Tachometers and Timers Totalizers 1 Technical Data and Specifications 1 General Specifications Description Specification 1 Figures 6 1 Count speed 600 cpm Figure size 5/32 in (4.0 mm) 1 Reset None Mounting Base, bottom, top, panel or snap-in 1 Finish Black, self-extinguishing plastic Power requirements DC: 1.5W, AC: 5.0V 1 1 1 1 1 Dimensions Approximate Dimensions in Inches (mm) SE Series Bottom Mount 1 1 1 Base Mount 1.01 (25.7) 1.00 (25.4) 1.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 MF Series 1 Product Description Model MF Series are shaded pole electric counters with straight AC operation and feature a non-rectified, shaded pole coil designed to withstand transient, high voltage spikes. This feature, 1 combined with a simplified, hinged escapement drive, also eliminates the possibility of miscounts and greatly adds to the life of the counter. Tallies at speeds up to 750 cpm.
1.1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Dimensions Approximate Dimensions in Inches (mm) 1 MF Series 1 Panel Mounted 1 0.19 (4.8) 1 1 1 1 1 1 0.16 (4.0) 1.62 1.25 (41.3) (31.8) Dia. 0.15 (3.81) 4 Mtg. Holes 2.56 (65.0) 1 1 0.06 (1.6) 1.25 (31.8) 0.09 (2.4) Panel 2.56 (65.0) 3.68 (93.5) 0.25 (6.3) 2.56 (65.0) 4.62 x 1.44 (117.3 x 36.5) Panel Opening 3.68 (93.5) 3.51 x 1.44 (89.3 x 36.5) Panel Opening Base Mounted 3.31 (84.1) 0.28 (7.1) E F 0.87 1.37 (22.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 RMF Series 1 Product Description built-in higher capacity rectifier for AC operation. The counter has a minimum of moving parts that never need lubrication under normal operating conditions. Compact and rigid, it Model RMF Series of electric counters are designed to give accurate counts through a wide range of speeds up to 1000 cpm.
1.1 Counters, Panel Meters, Tachometers and Timers Totalizers 1 Technical Data and Specifications 1 General Specifications Description Specification 1 Figures 6 or 7 1 Speed Up to 1000 cpm Figure size 3/16 in (4.8 mm) high, white-on-black background 1 Reset Knob, key or non-reset Mounting Base or panel mount 1 Finish Black frame and side covers 1 Electrical connections Two-wire leads, 9 in (229 mm) long, AWG 22 (0.34 mm2), stripped 0.38 in (9.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 ME Series Product Description Small in size and price, but large in design versatility and model variety is the ME Series of miniature electric counters. Models in most popular AC or DC voltages operate on as little as 3 watts, with the non-reset Standards and Certifications models measuring only 1 x 1.593 x 2.187 in (25.4 x 40.5 x 55.5 mm) and weighing just three ounces (85 grams).
1.1 1 ME Series Miniature Electric Counter Counters, Panel Meters, Tachometers and Timers Totalizers ME Series Miniature Electric Counters, continued No.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Dimensions Approximate Dimensions in Inches (mm) 1 ME Series Counters 1 1 Bottom Mounted Panel Mounted 1 1 1 1 1 1 1 1 Bottom Mounted Base Mounted 1 1 1 1 1 1 ME Series Counters 1 Recommended Panel Mount Cut-Outs 4 Figure Pushbutton Reset Counters 6 and 7 Figure Non-Reset Counters 4 Figure Counters 6 and 7 Figure Counters Dimension Inches (mm) Dimension Inches (mm) Pushbutton Reset Non-Reset A 1.00 (25.4) A 1.00 (25.
1.1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Contents Electronic Totalizers Description 1 Mechanical Totalizers Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical Totalizers . . . . . . . . . . . . . . . . . Electronic Totalizers 1/32 DIN LCD Totalizers . . . . . . . . . . . . . . . . . . 1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter . . . . . . . . . . . . . . .
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 1/32 DIN LCD Totalizers Product Description Features Compact battery powered totalizers where AC power is unavailable. ● ● ● ● ● Standards and Certifications Low price and high efficiency Large eight-digit LCD display, height of the figures 0.
1.1 1 1 1 1 1 1 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers 1/32 DIN LCD Totalizers, continued Description Specification Counting inputs: Counting input of the DC version Max. 30 Vdc Slow counting input Max. 30 Hz (NPN) Fast counting input Max. 12 kHz (PNP) Switching level NPN: Low 0–0.7V, High 3–30 Vdc PNP: Low 0–0.7V, High 3–30 Vdc Counting Input of the high voltage versions 10–260 Vac/Vdc Counting input Optocoupler input, max. 30 Hz Min.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter Product Description Features Compact LED display for a variety of input signals. ● ● ● Display counter adding and subtracting Position display Frequency counter/ ratemeter Standards and Certifications ● ● ● ● Timer Display range: –199.999 to 999.
1.1 1 1 Totalizers Dimensions Approximate Dimensions in Inches (mm) 1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter 1 0.87 x 1.77 (22.0 x 45.0) 1.89 (48.0) 1 1 Counters, Panel Meters, Tachometers and Timers Max. 0.76 (19.3) Connections: 0.94 (24.0) 1 Panel Cut-Out: 0.87 + 0.01 x 1.77 + 0.02 (22.2 + 0.3 x 45 + 0.6) 1 0.16 (4.0) 0.26 (6.5) 2.32 (59.0) 1 1 2.09 (53.0) 1.97 + 0.02 (50 + 0.6) 1 1 1.10 (28.0) 0.98 x 1.97 (25 x 50) 1 0.04 (1.0) 1 1.97 + 0.02 (50 + 0.6) 2.20 (56.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Courier Series Product Description Features Eaton’s Courier Series is a high quality totalizer powered by a replaceable lithium battery. ● ● ● ● Eight-digit totalizer 1/Tau ratemeter Scaling capabilities Remote reset terminal Standards and Certifications ● ● ● 0.43 in (10.
1.1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers Technical Data and Specifications General Specifications Description Specification 1 Power Internal battery 3V, lithium 1 Life expectancy 5 years + Replacement part 36367-202 1 Backlight 1 10–30 Vdc at 30 mA max. 1 Backlight Reverse polarity protected Physical 1 Operating temperature –4 to 158 °F (–20 to 70 °C) Storage temperature –4 to 158 °F (–20 to 70 °C) 1 Operating humidity 60% noncondensing Weight 2.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Dimensions Approximate Dimensions in Inches (mm) 1 Courier Series 1 1 1.25 (31.8) 1 1 1 2.95 (74.9) 1.57 (39.9) T/R 1 2.67 (67.8) Recommended Panel Cutout 1 1 1.30 (33.0) 1 RST 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
1.1 1 1 1 Counters, Panel Meters, Tachometers and Timers Totalizers 1/8 DIN LED Multifunction Totalizer/Timer/Ratemeter Product Description Features LED display for a variety of input signals. ● ● ● 1 ● 1 Standards and Certifications Display counter adding and subtracting Position display Frequency counter/ ratemeter Timer, res. up to 0.001 second ● ● ● ● Programmable mode Display range: –199.999 to 999.
Counters, Panel Meters, Tachometers and Timers Totalizers 1.1 Dimensions Approximate Dimensions in Inches (mm) 1 1/8 DIN LED Multifunction Totalizer/Timer/Ratemeter 1 1 Max. 0.75 (19.0) 3.78 (96.0) 1 1 1.89 (48.0) 1.77 x 3.62 (44.9 x 91.9) 1 1 0.61 (15.5) 0.26 (6.5) 1 0.16 (4.0) 1 2.64 (67.1) 1.77 +0.02 (45.0 +0.6) 1 1 1 3.62 +0.03 (92.0 +0.8) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
1.2 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers Contents Count Controls/Preset Counters Description 1 Page Count Controls/Preset Counters Product Selection Guide . . . . . . . . . . . . . . . . . . . . 1/16 DIN Battery Powered LCD Count Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/16 DIN LCD Preset Counters with Rate and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ambassador Series (Totalizers) . . . . . . . . .
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 Product Selection Guide 1 1 Count Controls/Preset Counters/Totalizers Panel Cutout in Inches (mm) Characteristics E5-148-C Low cost, simple count control Battery operated 1.772 x 1.772 (45 x 45) 1 Page V13-T1-52 1 Easy-to-change preset values 1 Two-line display: input and preset values E5-648-C Two-line display: counter, timer or tachometer AC or DC power options 1.772 x 1.
1.2 1 1 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1/16 DIN Battery Powered LCD Count Control Product Description Features Battery-powered electronic preset counter.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 Dimensions 1 Approximate Dimensions in Inches (mm) 1 1/16 DIN Battery Powered LCD Count Control 1 Max. 0.41 (10.5) 1.89 (48.0) 1 123456 7 1.89 (48.0) SQ 1.77 (45) 1 1 2 3 4 5 6 7 1 0.63 (16.0) 2.49 (63.2) 1 0.12 (3.0) 1 Panel Cut-Out 1.77 x 1.77 (45 x 45) 2.17 (55.0) 1 Max. 0.37 (9.5) 2.17 (55.0) SQ 1.77 (45) With Front Bezel No. 2 Panel Cut-Out 1.97 x 1.97 (50 x 50) 0.63 (16.
1.2 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1/16 DIN LCD Preset Counters with Rate and Time Product Description Features AC or DC powered preset counters that can function as timer or tachometer/ ratemeter.
1.2 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers General Specifications, continued Description Specification 1 Programmable as normally open or normally closed 1 Output 1 Relay 1 Switching voltage max. 250 Vac/110 Vdc Switching current max. 3 A Vac/3 A Vdc Switching current at DC min. 30 mA Vdc Switching power at DC 90 W Switching power at AC max. 750 VA 1 Relay with changeover/Form C contact 1 1 Output 2 Relay Switching voltage max.
1.2 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers President Series (Count Control) Product Description Features Eaton’s President Series features an easy-to-read LED and a simple preset input by means of the large keypad. ● 1 1 ● ● 1 1 ● Standards and Certifications Five- or six-digit, LED display, 0.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 Technical Data and Specifications 1 President Series—Count Control 1 Description Model 58831400 58851400 58827400 58827410 AC power requirements 120V/240V +10%/-20%, 47–63 Hz 120V/240V +10%/-20%, 47–63 Hz 120V/240V +10%/-20%, 47–63 Hz 120V/240V +10%/-20%, 47–63 Hz DC power requirements 11–28 Vdc 11–28 Vdc 11–28 Vdc 11–28 Vdc Power consumption 18 watts max. 18 watts max. 18 watts max.
1.2 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1 58827400 Count Frequency 1 Scale Factor Count Up Count Down Quadrature 0.999 4,000 2,250 2,000 1.000 5,000 3,500 3,500 1 1.999 3,500 2,000 1,250 2.000 4,000 3,000 2,750 1 9.000 1,500 1,500 1,500 9.
1.2 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers Dimensions Approximate Dimensions in Inches (mm) 1 President Series Count Control 1 1 5.433 ±0.04 (138 ±1.0) 0.735 ±0.02 (18.7 ±0.5) 2.677 ±0.03 (68 ±0.7) 1 2.62 ±0.025 (66.67 ±0.6) Recommended Panel Cutout 0.95 ±0.04 (24.1 ±1.0) 1 1 1 1 5.53 ±0.015 (140.5 ±0.4) 5.78 ±0.02 (146.8 ±0.5) 5.91 ±0.03 (150.1 ±0.8) 1 1 5.80 ±0.015 (147.3 ±0.
1.2 1 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers Ambassador Series (Totalizers) Product Description Features Eaton’s Ambassador Series is our most noise-immune totalizer available. Various counting modes can be set by the user.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 General Specifications, continued Description 1 Specification 1 Count Inputs Sink 4.6 Kohms to +5 Vdc 1 High 3.5 to 34.0 Vdc 1 Low 0.0 to 1.9 Vdc 1 2.3 Kohms to common 1 High 3.5 to 17.0 Vdc (100% duty cycle) Low 0.0 to 1.9 Vdc 1 2.3 Kohms to common 1 Impedance Voltage Source (high) Impedance Voltage Source (low) Impedance 1 DC voltage High Low AC voltage 0.6 to 17.0 Vdc 1 –17.0 to –0.
1.2 1 1 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers Dimensions Approximate Dimensions in Inches (mm) Ambassador Series Totalizer 1 1 C 123456 P1 10000 1 1 RST CLR RUN PGM PRNT 1 EXIT ENT SEL 1 1 1 1 1 • 2.946 ±0.015 (74.83 ±0.38) 1 1 2.946 ±0.015 (74.83 ±0.38) 5.60 ±0.03 (142.24 ±0.76) Gasket 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 Panel Cutout Max. Panel Thickness 0.50 (12.7) 2.677 ±0.028 (68.00 ±0.70) 2.677 ±0.028 (68.00 ±0.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 Ambassador Series (Count Control) Product Description Features Eaton’s Ambassador Series provides up to four presets in one of the most noiseimmune packages available.
1.2 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1 General Specifications, continued 1 Totalizer Type Bi-directional, same or opposite of main counter 1 Digits Eight 1 Scaler Shared with main counter Decimal point Tracks main counter 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Specification Count Input Speeds See tables on Page V13-T1-65 Count Inputs Sink Impedance 4.6 Kohms to +5 Vdc Voltage High 3.5 to 34.0 Vdc Low 0.0 to 1.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 Output Latency for Ambassador Control Style Number Output Latency 5760X401 0.7 to 2 ms 5760X403 0.7 to 2.7 ms 5760X404 0.7 to 2.7 ms 5760X405 <1 ms 1 1 1 1 1 Rate Indicator Specs for Ambassador Control Style Number Update Time Zero Time 5760X401 1 second, fixed 10 seconds, fixed 5760X403 1 second, fixed 10 seconds, fixed 5760X404 1 second, fixed 10 seconds, fixed 5760X405 0.1 to 99.
1.2 1 1 1 Approximate Dimensions in Inches (mm) Ambassador Series C 123456 P1 10000 1 1 1 1 1 1 1 RST CLR RUN PGM PRNT EXIT ENT SEL 2.946 ±0.015 (74.83 ±0.38) • 5.60 ±0.03 (142.24 ±0.76) 2.946 ±0.015 (74.83 ±0.38) 1 1 Count Controls/Preset Counters/Totalizers Dimensions 1 1 Counters, Panel Meters, Tachometers and Timers Gasket 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 Panel Cutout Max. Panel Thickness 0.50 (12.7) 2.677 ±0.028 (68.00 ±0.70) 2.677 ±0.028 (68.00 ±0.
Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1.2 PD-Q and PD-ER Series Product Description The PD-Q Series is a fivedigit, true subtracting electric predetermined counter that features pushbutton operation of both predetermined count settings and reset. The predetermined count is set by holding the RESET button in and then depressing the easy to operate pushbutton selectors under each digit.
1.2 Counters, Panel Meters, Tachometers and Timers Count Controls/Preset Counters/Totalizers 1 Technical Data and Specifications 1 General Specifications Description Specification 1 Number of digits Five 1 Speed 1000 cpm Window Acrylic 1 Shaft Stainless steel Frame Zinc alloy die cast 1 Digit size 3/16 in high by 7/64 in wide (4.8 x 2.8 mm) 1 1 1 1 Weight Series PD-Q 0.53 lb (0.24 kg) Series PD-ER 1.06 lb (0.
Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1.3 Contents Tachometers/Ratemeters Description Page Count Controls/Preset Counters Product Selection Guide . . . . . . . . . . . . . . . . . . Courier Series . . . . . . . . . . . . . . . . . . . . . . . . . . Eclipse Series . . . . . . . . . . . . . . . . . . . . . . . . . . Ambassador Series . . . . . . . . . . . . . . . . . . . . .
1.3 1 Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters Product Selection Guide 1 Tachometers/Ratemeters 1 Characteristics E5-_24-E Compact device with bright, LED display 1 Multiple functions available: count, time, rate, multifunction, double-function 1 24 Vdc Power 1 E5-496-E Economical, multifunction display Large, LED characters 1 Panel Cutout in Inches (mm) Page 0.870 x 1.772 (22 x 45) V13-T1-43 1.772 x 3.780 (45 x 96) V13-T1-48 1.772 x 1.
Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1.3 Courier Series Product Description Features Eaton’s Courier Series is powered by a replaceable lithium battery. ● ● ● ● ● ● 1 Standards and Certifications 1/Tau ratemeter Scaling capabilities Remote reset terminal 0.43 in (10.
1.3 1 1 1 Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters General Specifications, continued Description Specification DC Common (Terminal 1) Rate Inputs Input B (terminal 2) low speed input designed for contact closures to DC common Speed 0 to 20 Hz 1 Min. low time 10 ms 1 Min. high time 40 ms Input impedance 101k ohm 1 1 1 1 Voltage thresholds Low 0–0.4 Vdc High 2.0–28 Vdc Max.
Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1.3 Eclipse Series Product Description Features Eaton’s Eclipse Series offers a high visibility LED and a variety of optional outputs. ● ● ● ● ● ● 1/8 DIN cutout NEMA 4X front panel Universal AC power supply (85–265 Vac) Removable screw terminals Short depth: 3.
1.3 Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1 General Specifications, continued 1 Accessory Power Output Voltage 12 Vdc ±12% 1 Current 75 mA max.
Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1.3 Dimensions Approximate Dimensions in Inches (mm) 1 Eclipse Series Ratemeter 1 1 1 2.19 (55.6) 1.772 ±0.02 (45 ±0.6) PGM 1 1 4.04 (102.6) 1 3.622 ±0.031 (92.00 ±0.8) Panel Cutout 1 1 Max. Panel Thickness 0.190 (4.83) 1 1 3.63 (92.2) 1 3.31 (84.1) 1 0.27 (6.9) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
1.3 1 1 1 Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters Ambassador Series Product Description Features Eaton’s most noise-immune ratemeter with an easy-toread two-line LCD. ● 1 ● 1 ● ● 1 1 1 1 ● AC/DC powered, two-line LCD display Two-line, five-digit, high visibility, 0.3 in (7.
Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters 1.3 General Specifications, continued 1 7.3 kHz 1 0–5V, single input 50 kHz 1 Solid-State Input Sinking sensor (all DIPs off) Sourcing sensor (push-pull output) High threshold (DIPs 1 and 2 on, 3 and 4 off) 1 0–5V, two inputs 30 kHz (each input) 0.5–4.5V, single input 40 kHz 1 0.5–4.
1.3 1 1 Counters, Panel Meters, Tachometers and Timers Tachometers/Ratemeters Dimensions Approximate Dimensions in Inches (mm) Ambassador Series Ratemeters 1 1 A 12345 R/M 1 1 1 UNL CLR RUN PGM AKN EXIT ENT SEL 2.946 ±0.015 (74.83 ±0.38) • 5.60 ±0.03 (142.24 ±0.76) 2.946 ±0.015 (74.83 ±0.38) 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 1 1 2 3 4 5 6 7 8 9 10 Panel Cutout Max. Panel Thickness 0.50 (12.7) 2.677 ±0.028 (68.00 ±0.70) 2.677 ±0.028 (68.00 ±0.
Counters, Panel Meters, Tachometers and Timers Digital Panel Meters 1.4 Contents Digital Panel Meters Page 1 V13-T1-80 V13-T1-82 1 Description Count Controls/Preset Counters E5-324-E Series . . . . . . . . . . . . . . . . . . . . . . . . . Eclipse Series . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Learn Online 1 1 1 1 1 1 Product Overview Digital Panel Meters are found anywhere a process variable needs to be indicated.
1.4 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Digital Panel Meters E5-324-E Series Product Description Features Eaton’s most compact panel meter provides an easy-toread LED in a very small package.
Counters, Panel Meters, Tachometers and Timers Digital Panel Meters 1.4 Dimensions Approximate Dimensions in Inches (mm) 1 E5-324-E Series 1 0.87 x 1.77 (22.0 x 45.0) 1.89 (48.0) Max. 0.76 (19.3) 1 Connections: 1 0.94 (24.0) 1 Panel Cut-Out: 0.87 + 0.01 x 1.77 + 0.02 (22.2 + 0.3 x 45 + 0.6) 1 0.16 (4.0) 1 0.26 (6.5) 2.32 (59.0) 1 2.09 (53.0) 1.97 + 0.02 (50 + 0.6) 0.98 x 1.97 (25 x 50) 1.10 (28.0) 1 1 0.98 + 0.02 (25 + 0.5) 0.04 (1.0) 1 1 Panel Cut-Out 1 0.16 (4.0) 1.
1.4 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Digital Panel Meters Eclipse Series Product Description Features Eaton’s Eclipse Series panel meter features a highvisibility LED and is available with a variety of input and scaling options. ● ● ● ● ● 1 ● Four full digits 1/8 DIN Size Red, LED display 0.
Counters, Panel Meters, Tachometers and Timers Digital Panel Meters 1.
1.4 Counters, Panel Meters, Tachometers and Timers Digital Panel Meters 1 Technical Data and Specifications 1 General Specifications Description Specification 1 Input Power 1 Input power 85–265 Vac, 47–63 Hz, 20 VA External fuse 0.2 A, 250 Vac, time delay (T200 mA, 250 V) Isolation dielectric strength 2300 Vac 1 1 AC powered models (57751-4XX) Human Interface Display ±4 full digits 1 Type 0.56 in (14 mm) high, seven segment, red LED 1 Update time 0.
Counters, Panel Meters, Tachometers and Timers Digital Panel Meters 1.4 General Specifications, continued Description 1 Specification 1 Signal Input, continued 5 A AC models (5770X-44X) Range 5 A AC, true rms Frequency 40 to 1000 Hz Impedance 0.02 ohm (shunt output capacitive coupled) Overrange 10 A maximum Accuracy ±0.4% of reading, ±0.13% FS, ±0.5 digit, and ±200 PPM/°C for crest factor = 1; plus ±0.7% for crest factor = 1 to 3; and ±2.
1.4 1 1 Counters, Panel Meters, Tachometers and Timers Digital Panel Meters Dimensions Approximate Dimensions in Inches (mm) Eclipse Series 1 1 1 2.19 (55.6) 1.772 ±0.02 (45 ±0.6) PGM 1 4.04 (102.6) 1 3.622 ±0.031 (92.0 ±0.8) Panel Cutout 1 1 Max. Panel Thickness 0.19 (4.8) 1 1 3.63 (92.2) 1 3.31 (84.1) 1 0.27 (6.9) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-86 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 Contents Timers/Hour Meters Description Timers/Hour Meters Product Selection Guide . . . . . . . . . . . . . . . . . . Electronic Timers/Hour Meters . . . . . . . . . . . . . Electromechanical Timers/Hour Meters . . . . . . Page V13-T1-88 V13-T1-89 V13-T1-95 Learn Online 1 1 1 1 1 1 1 1 1 1 1 Product Overview Timers are used in applications where time itself is the main focus.
1.5 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters Product Selection Guide 1 Timers/Hour Meters 1 Characteristics E5-_24-E Compact device with bright, LED display 1 Multiple functions available: count, time, rate, multifunction, doublefunction 1 24 Vdc Power 1 E5-496-E Economical, multifunction display Large, LED characters 1 Panel Cutout in Inches (mm) Page 0.870 x 1.772 (22 x 45) V13-T1-43 1.772 x 3.622 (45 x 92) V13-T1-48 0.870 x 1.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 Contents Electronic Timers/Hour Meters Description Electronic Timers/Hour Meters 1/32 DIN LCD—Timers . . . . . . . . . . . . . . . . . . . E42DI24/E42DIR Series . . . . . . . . . . . . . . . . . . Electromechanical Timers/Hour Meters . . . . . . . .
1.5 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1/32 DIN LCD—Timers Product Description Features Simple battery-powered timers provide an easy-toread LCD and a variety of timing display options. ● ● ● 1 1 ● 1 Low price and high efficiency Large eight-digit LCD display, height of the figures 0.31 in (8 mm) Different time ranges from 0.1 second to 100,000 hours 0.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 General Specifications, continued Description 1 Specification 1 Timer inputs, DC versions (max. 30 Vdc) Timer input NPN or PNP depending on the type 1 Switching level NPN low 0–0.7V NPN high 3–30 Vdc PNP low 0–0.7V PNP high 4–30 Vdc 1 NPN For low signal at the timer input 1 PNP For high signal at the timer input 1 Timer input Optocoupler input max. 30 Hz Min.
1.5 1 1 1 Timers/Hour Meters Dimensions Approximate Dimensions in Inches (mm) 1/32 DIN LCD Timers 1 1 Counters, Panel Meters, Tachometers and Timers MAX. 1.89 (19.3) 1.89 (48) 0.87 x 1.77 (22 x 45) 0.94 (24) 1 0.11 (2.8) 1.88 (47.7) 1 1.77 + 0.024 (45 + 0.6) 1 1 1 0.12 (3) 1.77 + 0.012 (22.2 +0.3) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-92 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 E42DI24/E42DIR Series Product Description Features Simple LCD hour meters with flexible input voltages ● ● ● Solid-state hour meters Record and display up to 99,999.
1.5 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters Dimensions Approximate Dimensions in Inches (mm) E42DI24/E42DIR Series 1 U Clamp for 0.03 – 0.25 (7.6 – 6.4) Panel Thickness 1 Washer Thumbnut 0.16 (4.0) Black Bezel 1 QUARTZ 1 HOURS 1 — 10 Terminal 0.25 (6.4) Max. 1 1 0.35 (8.9) Max. Dia. 2.30 (58.4) Max. 1 1 1 1 1 Dia. 2.06 (52.3) Max. 0.52 (13.2) Max. 1.40 (35.6) 0.06 (1.5) 1.13 (28.6) Max. 1.13 (28.7) Terminal 0.25 (6.4) +0.01 HOURS 0.89 (22.6) 1/10 1.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 Contents Electromechanical Timers/Hour Meters Description Electronic Timers/Hour Meters . . . . . . . . . . . . . . . Electromechanical Timers/Hour Meters 1/16 DIN Hour Meters . . . . . . . . . . . . . . . . . . . 71.1 Round Hour Meters . . . . . . . . . . . . . . . . . Hour Meter/Counter . . . . . . . . . . . . . . . . . . . . .
1.5 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1/16 DIN Hour Meters Product Description Typical Application Eaton’s most cost-effective elapsed time meter. Features IP65 protection against water intrusion.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 Technical Data and Specifications 1 General Specifications Description Specification 1 Electrical connection Clamp terminal for cable diameter up to 14 AWG (2.5 mm2), tightening torque max. 0.59 lb-ft (0.8 Nm) 1 Approx. 500 mW 1 Power consumption 10–30 Vdc 100–130 Vdc 1 Approx. 750 mW Rated voltages 100–130 Vac, 50 or 60 Hz On time 100% 1 Seven at AC 99999.99 Eight at DC 999999.
1.5 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters Dimensions Approximate Dimensions in Inches (mm) 1/16 DIN Hour Meters 1 1 Dia. 1.97 (50) 1 1 1 1.89 (48) SQ. 0.35 (9) Max. 1 1.10 (28) 1 1 1 1 0.28 (7) Screw Terminal SQ. Panel Cut-Out DIN Rail Adapter 1.91 (48.5) 1 1 1.77+0.02 (45+0.6) 1.77 (45) SQ. 2.42 (61.5) 1 0.75 (19) 1.62 (41.1) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-98 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 71.1 Round Hour Meters Product Description Typical Application Eaton’s 6-T-3H hour meters are heavy-duty elapsed time meters with NEMA 4X protection.
1.5 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters Dimensions Approximate Dimensions in Inches (mm) 71.1 Round Hour Meter Dia. 2.54 (64.5) Dia. 2.44 (62) Dia. 0.15 (3.8) 1 120° 0.03 x 0.25 (0.8 x 6.3) Dia. 0.13 (3.3) 1 Dia. 2 (50.8) 1.68 (42.7) 1 Dia. 2 (50.8) 1 Dia. 2.80 (71.1) 1 0.47 (12) 1.26 (32) 0.21 (5.3) Panel Cut-Out 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-100 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters 1.5 Hour Meter/Counter Product Description Typical Application Eaton’s CEC series combination meters provide an event counter and elapsed time meter is one compact unit.
1.5 1 1 Counters, Panel Meters, Tachometers and Timers Timers/Hour Meters Dimensions Approximate Dimensions in Inches (mm) DIN Rail Mount 1 0.197 (5.0) 1 1 1 1 1 1 2.106 (53.5) h 2.421 (61.5) SQ 1.91 (48.5) 0.748 (19.0) 0.047 (1.2) Front Panel Mount 1 0.256 (6.5) Max. 1 1 h 1 1 1 1 0.047 (1.2) SQ 2.166 (55.0) 0.374 (9.5) 1.122 (28.5) Dia. 1.988 (50.5) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V13-T1-102 Volume 13—Counters, Timers and Tachometers CA08100015E—December 2015 www.eaton.
Counters, Panel Meters, Tachometers and Timers Fusion Integrated Machine Control 1.6 Contents Fusion Integrated Machine Control Description Fusion Integrated Machine Control Standards and Certifications . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.6 1 Counters, Panel Meters, Tachometers and Timers Fusion Integrated Machine Control Features and Benefits Feature Customer Benefit 1 High speed count functions; including scaling, main counter, five presets, pre-warn, totalizer, batch and rate “Canned” count functions offer flexibility and ease of setup in the desired units of measure. 1 High speed counting independent of ladder scan time Precise and repeatable output response for high performance applications.
Counters, Panel Meters, Tachometers and Timers Fusion Integrated Machine Control 1.6 Technical Data and Specifications 1 General Specifications Description 1 Specification 1 Environmental Operation Indoor use to 2000 m Temperature 32 to 122 °F (0 to 50 °C) operating 1 –4 to 158 °F (–20 to 70 °C) storage Humidity 1 0 to 85% RH, noncondensing Vibration 2.
1.6 1 1 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Fusion Integrated Machine Control General Specifications, continued Description Specification Outputs Power (AC input model only) 24 Vdc ±15%, 100 mA max., short-circuit protected 12 Vdc ±10%, 75 mA max., short-circuit protected Relays Number 3 (Form C), 2 (Form A) Contacts 5 A, 250 Vac, 30 Vdc Isolation 2300 Vac Transistors Number 2 1 Type NPN Darlington 1 Ratings 150 mA max. ON current, 30 Vdc max.
Counters, Panel Meters, Tachometers and Timers Fusion Integrated Machine Control 1.6 Dimensions Approximate Dimensions in Inches (mm) 1 Fusion Integrated Machine Control 1 1 1 5.33 (135.5) 1 01 L1 L2 1 xxxx 2 3 1 2 2 RUN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 17 P/N 57551 400 1 1 1 F1 F2 1 F4 1 F3 1 F5 1 F6 4 5 6 1 2 3 3.42 (86.9) 2.57 (65.3) 1 1 5 6.18 (157) 0.38 (9.7) 1 2.50 (63.5) 2.79 (70.8) 1 1 1 2.677±0.028 (68±0.7) 1 1 5.433±0.
1.7 1 Counters, Panel Meters, Tachometers and Timers Temperature Controls Contents TC Series Description 1 Page TC Series Product Selection . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . Special Control Function Inputs . . . . . . . . . . . . . . .
Counters, Panel Meters, Tachometers and Timers Temperature Controls 1.
1.7 1 Counters, Panel Meters, Tachometers and Timers Temperature Controls General Specifications, continued Description Specification 1 Alarm 1 Alarm functions Dwell timer, deviation high/low alarm, deviation band high/low alarm, PV high/low alarm 1 Alarm mode Normal, latching, hold, latching/hold Dwell timer 0.1 to 4553.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Contents Accessories and Encoders Description Accessories and Encoders DIN Rail Adapter . . . . . . . . . . . . . . . . . . . . . . . . C-Face Ring Tachometer . . . . . . . . . . . . . . . . . . Magnetic Pickup Sensor and Gear . . . . . . . . . . Rotary Contactor—ES9513/ES9513RS . . . . . . . Measuring Wheels . . . . . . . . . . . . . . . . . . . . . . Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . .
1.8 1 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders DIN Rail Adapter Product Description Features Allows mounting of 1/32 DIN front panel mounted products to DIN rail inside panel. ● 1 ● 1 ● 1 1 1 1 For panel-mounting all DIN size counters, timers and process indicators 0.94 x 1.89 in (24 x 48 mm) or 1.97 x 0.98 in (50 x 25 mm) Cut-out: 0.98 x 1.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 C-Face Ring Tachometer Product Description Features Provides sensing of motor speed when used with ratemeter/tachometer.
1.8 1 1 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders Magnetic Pickup Sensor and Gear Product Description Sensor ideal for use with a variety of Eaton counters to show motor/shaft speed or measurement. 1 1 1 1 Features 30-Tooth Gear Accessory ● 1.6 in (41 mm) diameter ● 0.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Measuring Wheels Product Description Features Measuring wheel mounts to Eaton encoders and rotary contactor to allow for accurate measurement. ● ● 1 For use with shaft encoders and rotary contactors 12 in (304.
1.8 1 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders Cube Style Shaft Encoders Product Description Features Provides accurate pulse outputs for use with PLCs and counters. ● 1 ● ● ● 1 ● 1 1 1 1 5–28 Vdc input power 80 mA current draw NPN transistor output, 250 mA sinking capacity Square wave output; (50-50 duty cycle) Single channel and quadrature models ● ● ● ● ● Up to 600 pulses per revolution 3/8 in (9.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Technical Data and Specifications 1 General Specifications Description 1 Specification 1 Electrical Input (38150) 1 Voltage 9 to 16 Vdc Current 60 mA max. at 16 Vdc Ripple 2% 1 5 to 28 Vdc 1 Input (38151) Voltage Current 60 mA nom., 100 mA max. Ripple <2% 1 1 Output Type Current sinking transistor with 1.5 Kohms pull-up Sinking current 100 mA max. Max. voltage at 100 mA 1.
1.8 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders Dimensions Approximate Dimensions in Inches (mm) Cube Shaft Encoders 1 2.25 (57.2) 1 0.50 (12.7) 0.33 (8.3) 1 1 1 1 1 0.06 (1.6) 0.70 (17.8) 1 0.25 (6.4) 2.25 (57.2) 45° 0.38 (9.5) (4) 6.32 (160.5) Tapped Holes 0.25 (6.4) Deep on 2.00 (50.8) B.C. (Same Mtg. Holes on Opposite End and Bottom) 2.25 (57.2) (4) 6.32 (160.5) Tapped Holes 0.25 (6.4) Deep on 2.00 (50.8) B.C.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Heavy-Duty Shaft Encoders Product Description Features Provides accurate pulse outputs for use with PLCs and counters. ● ● ● ● ● 1 5–28 Vdc input power 80 mA current draw NPN transistor output, 250 mA sinking capacity Square wave output Single channel and quadrature models ● ● ● ● 1 3/8 in (9.
1.8 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1 Technical Data and Specifications 1 General Specifications 1 1 1 1 1 1 Description Specification Electrical Input Voltage 5 to 28 Vdc Current 60 mA nom., 100 mA max. Ripple –2% Output Type Current sinking transistor with 1.5 Kohms pull-up Sinking current 100 mA max. Max. voltage at 100 mA 1.3 Vdc Blocking voltage 40 Vdc max.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Dimensions Approximate Dimensions in Inches (mm) 1 Heavy-Duty Encoder 1 3.00 (76.2) 1.50 (38.1) 0.70 (17.8) 0.81 (20.6) 1 3.00 (76.2) 0.06 (1.6) 1.50 (38.1) 1 1.13 (28.6) 1 1.18 (30.0) 1.50 (38.1) 1 3.00 (76.2) 1 1.50 (38.1) 45° Mounting Holes (Typical) 1/4-20, 0.55 (14.0) Deep on 2.00 (50.8) B.C. 6.00 (152.4) 1 Dia. 0.38 (9.5) Shaft with Flat 2.00 (50.
1.8 1 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders Right Angle, Size 20 Shaft Encoders Product Description Features Provides accurate pulse outputs for use with PLCs and counters. ● 1 ● ● ● 1 ● 1 1 1 5–28 Vdc input power 100 mA current draw NPN transistor output, 100 mA sinking capacity Quadrature output, two square waves Up to 1800 pulses per revolution ● ● ● ● Flange mounting 3/8 in (9.
Counters, Panel Meters, Tachometers and Timers Accessories and Encoders 1.8 Technical Data and Specifications 1 General Specifications Description 1 Specification 1 Electrical Input 1 Voltage 5 to 28 Vdc (4.75 min., 28.0 max.) Current 100 mA max. with no output load Ripple –2% peak to peak at 5 Vdc 1 Type Quadrature current sinking transistors with 2.2 Kohms pull-up 1 Sinking current 100 mA max. Max. voltage at 100 mA 1.3 Vdc Output Blocking voltage 40 Vdc max.
1.8 1 1 Counters, Panel Meters, Tachometers and Timers Accessories and Encoders Dimensions Approximate Dimensions in Inches (mm) Right-Angle Shaft Encoder 1 6-32 UNC 0.25 (6.4) Deep 4 x 90° Dia. 2.0 (50.8) B.C. 1 3/8" 0.3745 (9.512) 1 0.75 (19.1) 1 0.63 (15.9) 1 1.18 (30) 2.06 1.75 (52.3) (44.5) 0.05 (1.3) 1 1 1.41 (35.9) 2.06 (52.3) 1 Side Mount MS Style Connector Shaft Size Dia. 0.16 (4.0) Through 4 x 90° Dia. 2.48 (62.9) B.C. 0.87 (22.1) 0.80 (20.3) 2.0 (50.8) 0.05 (1.3) 0.30 (7.
Counters, Panel Meters, Tachometers and Timers Accessories 1.