Cut Sheet

V8-T3-16 Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.1
Inductive Proximity Sensors
iProx Sensors
iProx Starter Kits
Technical Data and Specifications
iProx Sensors
Response Time
2
Notes
Ryton
®
is a registered trademark of Phillips Chemical (division of Phillips Petroleum).
1
Our products conform to NEMA
®
tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications.
2
iProx sensors may be programmed to perform in side by side or high noise immunity applications using the iProx programming cable (E59RP1) and ProxView software (E59SW1).
3
Use the side by side response time parameter when using the iProx Tray Programmer (E59TP1), iProx programming cable (E59RP1) and ProxView software (E59SW1).
Description Catalog Number
Interested in custom programming iProx sensors to fit your application?
These kits include everything needed to get the most out of iProx: a sensor, a programming cable (E59RP1),
a micro connector cable (CSDS4A4CY2202) and ProxView software on CD-ROM (E59SW1).
Starter kit includes:
12 mm AC unshielded iProx sensor (E59-M12C110A01-A1) E5912ACKIT
12 mm DC unshielded iProx sensor (E59-M12C110D01-D1) E5912DCKIT
18 mm AC unshielded iProx sensor (E59-M18C118A01-A1) E5918ACKIT
18 mm DC unshielded iProx sensor (E59-M18C116D01-D1) E5918DCKIT
30 mm AC unshielded iProx sensor (E59-M30C129A01-A1) E5930ACKIT
30 mm DC unshielded iProx sensor (E59-M30C129D01-D1) E5930DCKIT
Description Two-Wire Sensors Three-Wire Sensors
Input voltage 20–132 Vac 6–48 Vdc
Load current 250 mA 300 mA
Leakage current ≤1.7 mA at 32 °F (0 °C), 2.0 mA at –40 °F (–40 °C) ≤150 μA
Voltage drop <5 Vac ≤2.5 Vdc
Burden current — ≤15 mA
Protection None Auto reset
Switching hysteresis <15% rated sensing distance <15% rated sensing distance
Repeat accuracy Shielded models: <1% sensing distance;
Unshielded models: <3% sensing distance
Shielded models: <1% sensing distance;
Unshielded models: <3% sensing distance
Surge capacity 3 A/30 ms —
Temperature range –40 to 158 °F (–40 to 70 °C) –40 to 158 °F (–40 to 70 °C)
Material of construction 303 stainless steel; end bells: polycarbonate;
face caps: Ryton
®
; cable: AWM style 20387 (PVC)
303 stainless steel; end bells: polycarbonate;
face caps: Ryton
®
; cable: AWM style 20387 (PVC)
Vibration and shock Vibration: 10 to 55 Hz, 1 mm amplitude,
IEC 60068-2-6; shock: 30 g, 11 ms per IEC 68-2-27
Vibration: 10 to 55 Hz, 1 mm amplitude,
IEC 60068-2-6; shock: 30 g, 11 ms per IEC 68-2-27
Indicator LED 360° viewable LED 360° viewable LED
Enclosure ratings NEMA 4, 4X, 6, 6P, 12 and 13 (IP67) IP69K
1
NEMA 4, 4X, 6, 6P, 12 and 13 (IP67) IP69K
1
Three-Wire Sensors
Two-Wire Sensors Shielded Unshielded
Description All Two-Wire Models 12 mm 18 mm 30 mm 12 mm 18 mm 30 mm
Factory default mode Shipped in “Side by Side Mode” by
default (20 V/m)
580 Hz (10 V/m) 390 Hz (10 V/m) 240 Hz (10 V/m) 300 Hz (10 V/m) 150 Hz (10 V/m) 145 Hz (10 V/m)
Side by side
3
30 Hz (10 V/m) 50 Hz (20 V/m) 50 Hz (20 V/m) 50 Hz (20 V/m) 50 Hz (20 V/m) 50 Hz (20 V/m) 50 Hz (20 V/m)
High noise immunity mode 10 Hz (>20 V/m) 10 Hz (>20 V/m) 10 Hz (>20 V/m) 10 Hz (>20 V/m) 10 Hz (>20 V/m) 10 Hz (>20 V/m) 10 Hz (>20 V/m)
Starter Kit