Cut Sheet
V8-T3-52 Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3.6
Inductive Proximity Sensors
AccuProx Analog Sensors
Technical Data and Specifications
AccuProx Analog Sensors
Notes
1
Published range data is based on a 1 mm thick square target made of Type FE 360 steel per ISO Standard 630.
2
The sensor achieves its maximum repeat accuracy after warming up for a period of at least one hour.
3
Voltage outputs available on models ending in -CV.
4
Continuous short-circuits can exceed power dissipation ratings and cause eventual destruction.
12 mm Models 18 mm Models 30 mm Models
Description Shielded Unshielded Shielded Unshielded Shielded Unshielded
Performance
Analog operating range
1
0.5–4 mm 1–8 mm 1–7 mm 1–15 mm 1–12 mm 1–25 mm
Temperature range –40 to 158 °F
(–40 to 70 °C)
–40 to 158 °F
(–40 to 70 °C)
–40 to 158 °F
(–40 to 70 °C)
–40 to 158 °F
(–40 to 70 °C)
–40 to 158 °F
(–40 to 70 °C)
–40 to 158 °F
(–40 to 70 °C)
Temperature drift <± 10% <± 10% <± 10% <± 10% <± 10% <± 10%
Conformity <± 10% <± 10% <± 10% <± 10% <± 10% <± 10%
Repeat accuracy <25 μm
2
<20 μm
2
<40 μm
2
<20 μm
2
<50 μm
2
<30 μm
2
Minimum repeat accuracy <3.0% at max. range <1.1% at max. range <2.2% at max. range <1.2% at max. range <1.2% at max. range <0.8% at max. range
Recovery time <1.0 ms <1.1 ms <1.5 ms <2.0 ms <2.0 ms <3.0 ms
Response time 200 Hz 100 Hz 200 Hz 100 Hz 140 Hz 100 Hz
Linearity tolerance <± 1.0% of full scale <± 1.0% of full scale <± 1.0% of full scale <± 1.0% of full scale <± 1.0% of full scale <± 1.0% of full scale
Resolution 23 μm max. 16 μm max. 40 μm max. 21 μm max. 50 μm max. 30 μm max.
Electrical
Style AccuProx Analog,
three-/four-wire DC
AccuProx Analog,
three-/four-wire DC
AccuProx Analog,
three-/four-wire DC
AccuProx Analog,
three-/four-wire DC
AccuProx Analog,
three-/four-wire DC
AccuProx Analog,
three-/four-wire DC
Operating voltage 15–30 Vdc 15–30 Vdc 15–30 Vdc 15–30 Vdc 15–30 Vdc 15–30 Vdc
Current output signal 0–20 mA or
4–20 mA by model
0–20 mA or
4–20 mA by model
0–20 mA or
4–20 mA by model
0–20 mA or
4–20 mA by model
0–20 mA or
4–20 mA by model
0–20 mA or
4–20 mA by model
Current output load resistance 400–500 ohms 400–500 ohms 400–500 ohms 400–500 ohms 400–500 ohms 400–500 ohms
Current output ripple content ± 40 μA max. ± 40 μA max. ± 40 μA max. ± 40 μA max. ± 40 μA max. ± 40 μA max.
Current output minimum change 30 μA 20 μA 50 μA 28 μA 66 μA 40 μA
Voltage output signal
3
0–10 V 0–10 V 0–10 V 0–10 V 0–10 V 0–10 V
Voltage output load resistance 4.7–5.0 kohm
(2.5 mA max.)
4.7–5.0 kohm
(2.5 mA max.)
4.7–5.0 kohm
(2.5 mA max.)
4.7–5.0 kohm
(2.5 mA max.)
4.7–5.0 kohm
(2.5 mA max.)
4.7–5.0 kohm
(2.5 mA max.)
Voltage output ripple content ± 10 mV max. ± 10 mV max. ± 10 mV max. ± 10 mV max. ± 10 mV max. ± 10 mV max.
Voltage output minimum change 15 mV 10 mV 25 mV 14 mV 33 mV 20 mV
Burden current <20 mA <20 mA <20 mA <20 mA <20 mA <20 mA
Output LED Dual-color,
360º viewable
Dual-color,
360º viewable
Dual-color,
360° viewable
Dual-color,
360° viewable
Dual-color,
360° viewable
Dual-color,
360° viewable
Short-circuit protection Incorporated
4
Incorporated
4
Incorporated
4
Incorporated
4
Incorporated
4
Incorporated
4
Wire breakage protection Incorporated Incorporated Incorporated Incorporated Incorporated Incorporated
Reverse polarity protection Incorporated Incorporated Incorporated Incorporated Incorporated Incorporated
Physical
Size See Dimensions on Page V8-T3-54.
Enclosure protection NEMA 4, 4X, 6, 6P, 13 NEMA 4, 4X, 6, 6P, 13 NEMA 4, 4X, 6, 6P, 13 NEMA 4, 4X, 6, 6P, 13 NEMA 4, 4X, 6, 6P, 13 NEMA 4, 4X, 6, 6P, 13
Shock 30 g half-sine at 11 ms 30 g half-sine at 11 ms 30 g half-sine at 11 ms 30 g half-sine at 11 ms 30 g half-sine at 11 ms 30 g half-sine at 11 ms
Vibration 10–55 Hz,
1 mm amplitude
10–55 Hz,
1 mm amplitude
10–55 Hz,
1 mm amplitude
10–55 Hz,
1 mm amplitude
10–55 Hz,
1 mm amplitude
10–55 Hz,
1 mm amplitude
Housing material Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Stainless steel,
polycarbonate end bell,
polyphenylene sulfide
front cap
Termination Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m
Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m
Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m
Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m
Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m
Micro-connector,
potted cable, 2m;
Pigtail,
micro-connector, 2m