Cut Sheet

V8-T5-90 Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.8
Photoelectric Sensors
E58 Harsh Duty Series Sensors
Technical Data and Specifications
E58 Harsh Duty Series Sensors
Note
1
Turn power OFF and back ON to reset. Sensor will reset when short is removed.
Three-Wire and Four-Wire Sensors Two-Wire Sensors
Description
AC/DC Models
(AC Operation)
AC/DC Models
(DC Operation) DC Only Models
AC/DC Models
(AC Operation)
DC Only and AC/DC Models
(DC Operation)
Input voltage 20–132 Vac, 50/60 Hz 15–30 Vdc 10–30 Vdc 90–132 Vac, 50/60 Hz 18–50 Vdc
Power dissipation 3W maximum 3W maximum 2W maximum 3W maximum 3W maximum
Output type VMOS (bi-directional) NPN (sink) Four-wire: NPN and PNP
(dual outputs)
18 mm models: DMOS/bipolar;
30 mm models: DMOS
18 mm models: DMOS/bipolar;
30 mm models: DMOS
Current switching 300 mA maximum 300 mA maximum PNP: 100 mA max.
NPN:
18 mm models: 250 mA max.;
30 mm models: 100 mA max.
18 mm models: 100 mA;
30 mm models: 300 mA
18 mm models: 100 mA;
30 mm models: 300 mA
Voltage switching 186V peak maximum 186V peak maximum 30 Vdc maximum 186V peak maximum 50 Vdc maximum
OFF-state leakage 250 μA typical:
500 μA maximum
250 μA typical:
500 μA maximum
10 μA maximum 1.7 mA maximum 18 mm models: 1.7 mA max.
30 mm models: 1.5 mA max.
Surge current 2A maximum 2A maximum 1A maximum 1A AC 1A DC
ON-state voltage drop — 1.8V at 10 mA
4.0V at 300 mA
NPN: 1.2V at 10 mA;
18 mm models: 2.0V at 100 mA;
30 mm models: 2.0V at 250 mA;
PNP: 2.8V at 100 mA
10 Vac rms 18 mm models: 10 Vdc
30 mm models: 8 Vdc
Response time 10 ms 2 ms 18 mm models: 1 ms;
30 mm models: 1.6 ms
35 ms 35 ms
Short circuit protection Sensor will turn off
immediately when a short or
overload is detected
(indicator LED will flash)
1
Sensor will turn off
immediately when a short or
overload is detected
(indicator LED will flash)
1
Sensor will turn off
immediately when a short or
overload is detected
(indicator LED will flash)
1
Auto reset Auto reset
Operating and storage
temperature range
–40° to 131°F
(–40° to 55°C)
–40° to 131°F
(–40° to 55°C)
–40° to 131°F
(–40° to 55°C)
18 mm models:
–40° to 158°F (–40° to 70°C)
30 mm models:
–10° to 131°F (–25° to 55°C)
18 mm models:
–40° to 158°F (–40° to 70°C)
30 mm models:
–10° to 131°F (–25° to 55°C)
Description All Models
Enclosure material Cable jacket: PVC (poly vinyl chloride)
Indicator ring: PVDF (high-density fluorinated polymer)
Seals: Viton (registered trademark of Dupont)
Lens cover:
Thru-beam and Perfect Prox
models: Tempered glass (or hard-coated polycarbonate for models ending in FC or FSC)
Polarized reflex models: Glass (or cast acrylic for models ending in FC or FSC)
Body: 303 stainless steel (or 316 stainless steel for models ending in FC or FSC)
Cable versions 2m cable length
Connector versions Male mini- and micro-connectors on 7 in pigtail (refer to model selection for number of pins per model)
Vibration and shock Vibration: 30g over 20 Hz to 2 kHz; shock: 100g for 3 ms 1/2 sinewave pulse
Indicator LED Thru-beam source: Lights when power is ON;
all other models: Lights steady when output is ON, flashes when short circuit protection is in latch condition (except two-wire models)
Sunlight immunity Perfect Prox 5000 ft-candles
others: 10,000 ft-candles
Enclosure ratings NEMA 1, 2, 3, 3R, 3S, 4, 4X, 6, 6P, 12, 12K and 13 (IP69K); This product is suitable for high temperature, high pressure washdown (1200 psi).
Chemical resistance This product was designed to withstand chemicals commonly used in the automotive, machine tool, food processing and forest industries.