Cut Sheet

Volume 8—Sensing Solutions CA08100010E—November 2012 www.eaton.com V8-T6-9
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6.1
Conveyor Sensor Systems
E68 Series Integral Sensor Valve
Buss Link Cable
Power Curve Delay Module
Connector Covers
Upstream Connector Cover
Downstream Connector Cover
Mounting Brackets
Mounting Bracket
Note
1
10 ft versions of buss harness have this connector built-in.
Length Description Used with Sensors Catalog Number
10 cm This cable allows two sections of buss harness to be
connected together.
1
Passes power and ZPA signals.
E68….-xy BUS266LINK-01B1
Power isolation version.
Passes ZPA signals but isolates power.
E68….-xy BUS266ISO-01B1
3m This cable allows two sections of buss harness to be
connected together. DC power is passed through the
connection.
Passes power only.
E68….-xy BUS266JUMP15-01B1
This cable allows two sections of buss harness to be
connected together. Both DC power and the ZPA signal is
passed through the connection.
Passes power and ZPA signals.
E68….-xy BUS266JUMP15-02B1
Length Description Used with Sensors Catalog Number
— Allows ZPA through a powered curve that is not divided into
ZPA controlled zones. Installed adjacent to the sensor at the
powered curve infeed. All required wiring is included.
E68…-xy 1451BSR1216
E68…-xyC 1451BSC1216
E68…-xyP 1451BSP1216
Description Used with Sensors Catalog Number
Used to seal the upstream micro-connector on the most infeed sensor. E68….-xyP E68-SVAUSC-P
Description Used with Sensors Catalog Number
Used to seal the downstream micro-connector on the discharge sensor
(if a release cable is not connected).
E68….-xyP E68-SVADSC-P
Description Used with Sensors Catalog Number
Mounting bracket for E68 sensor family. Can be used to mount
E68 sensor to conveyor side channel. Can also be used to mount
3 in retroreflector (6200A-6506).
E68…. 6161AS0285
Dimensions, see Page V8-T6-13.
BUS266LINK-01B1
BUS266ISO-01B1
BUS266JUMP15_
1451BS_
E68-SVAUSC-P
E68-SVADSC-P
6161AS0285