Cut Sheet

Volume 8—Sensing Solutions CA08100010E—November 2012 www.eaton.com V8-T6-25
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
For Customer Service in the U.S. call 1-877-ETN CARE (386-2273),
in Canada call 1-800-268-3578.
For Application Assistance in the U.S. and Canada
call 1-800-426-9184.
6.3
Conveyor Sensor Systems
Sensor Power Supply—NEMA 4 Universal Voltage
Sensor Power Supply—NEMA 4 Universal Voltage
Contents
Description Page
Sensor Power Supply—NEMA 4 Universal Voltage
Product Selection . . . . . . . . . . . . . . . . . . . . . . . V8-T6-26
Technical Data and Specifications . . . . . . . . . . V8-T6-26
Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . V8-T6-27
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . V8-T6-27
Sensor Power Supply—NEMA 4 Universal Voltage
Product Description
The Sensor Power Supply by
Eaton’s electrical sector was
specially designed to be used
with the 200 Series and E68
Series Zero Pressure
Accumulation Systems, but is
also suitable for use in a wide
variety of general material
handling applications. The
unit delivers 100W output at
27 Vdc and supports easy,
Class II wiring. The power
supply is a tamper-proof,
rugged component easily
mounted to a conveyor side-
channel or support. Internal
components are fully
protected in a sealed metal
housing to stand up to rugged
application, ensuring flawless
performance in any material
handling environment.
Features
●
Integrated AC junction box
features for one-step
mounting and wiring
without the need for
additional accessories or
enclosures
●
Built-in DC power health
contact allows easy
monitoring of power
supply status
●
Unique design features a
tamper-proof sealed
construction to reduce the
risk of damage associated
with conventional open
control-panel type supplies
●
Built-in slug-release input
converts an AC or DC input
to the appropriate DC
signal for integration with
the 200 Series and E68
Series Zero Pressure
Accumulation Systems
●
Dual output connection
terminals to make it easy
and convenient to locate
the power supply at the
center of the cable run
Standards and Certifications
●
cULus Class 2
DANGER
THIS SENSOR IS NOT A
SAFETY DEVICE AND IS NOT
INTENDED TO BE USED AS A
SAFETY DEVICE. This sensor
is designed only to detect
and read certain data in an
electronic manner and
perform no use apart from
that, specifically no safety-
related use. This sensor
product does not include
self-checking redundant
circuitry, and the failure of
this sensor product could
cause either an energized
or de-energized output
condition, which could result
in death, serious bodily
injury, or property damage.
For the most current information
on this product, visit our Web site:
www.eaton.com