Cut Sheet

Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com V8-T5-41
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.3
Photoelectric Sensors
IntelliView Series Sensors
Contrast Sensing Models Luminescence Sensing Models
Description
Specification
Input voltage 10–30 Vdc
Ripple 2V max.
Current consumption
(Output current excluded)
25 mA max.
Outputs PNP or NPN by model,
NO and NC,
30 Vcc max. (short-circuit protected)
Output current 100 mA max.
Output saturation voltage < 2V
Response time 185 μs
Switching frequency 2.7 kHz
Indicator LEDs Output LED (yellow)
Ready/error LED (green/red)
Data retention EEPROM non-volatile memory
Operating mode Light operate on NO output
Dark operate on NC output
Operating temperature –10° to 55°C (14° to 131°F)
Storage temperature –20° to 70°C (–4° to 158°F)
Operating distance 10 mm ± 2 mm
Beam type White LED (400–700 nm)
Vibration Amplitude: 0.5 mm
Frequency: 10–55 Hz for every axis (EN60068-2-6)
Shock resistance Half sine, 30 g
n
, 11 ms, 3 axes
Material of construction PBT
Lens material PMMA plastic
Enclosure ratings IP67
Connections M12 4-pin micro-connector cable
Weight 25g max.
Description
Specification
Input voltage 10–30 Vdc
Ripple 2V max.
Current consumption
(Output current excluded)
25 mA max.
Outputs PNP or NPN by model,
NO and NC,
30 Vcc max. (short-circuit protected)
Output current 100 mA max.
Output saturation voltage < 2V
Response time 1.1 ms
Switching frequency 445 Hz
Indicator LEDs Output LED (yellow)
Relay/error LED (green/red)
Data retention EEPROM non-volatile memory
Operating mode Light operate on NO output
Dark operate on NC output
Operating temperature –10° to 55°C (14° to 131°F)
Storage temperature –10° to 70°C (–4° to 158°F)
Sensing distance 8–20 mm (best signal at 10 mm)
Beam type White LED (400–700 nm)
Vibration Amplitude: 0.5 mm
Frequency: 10–55 Hz for every axis (EN60068-2-6)
Shock resistance Half sine, 30 g
n
, 11 ms, 3 axes
Material of construction PBT
Lens material PMMA plastic
Enclosure ratings IP67
Connections M12 4-pin micro-connector cable
Weight 25g max.