Cut Sheet

Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com V8-T5-21
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.1
Photoelectric Sensors
Enhanced 50 Series Sensors
Accessories
Enhanced 50 Series Sensors
Technical Data and Specifications
Enhanced 50 Series Sensors
Description Catalog Number
Mounting Bracket Right Angle—Short
Provides for full 360° rotation of sensor.
Bracket slots allow for up to 1.5 in of vertical adjustment. Nickel plated
6150E-6501
Mounting Bracket Right Angle—Tall
Provides for full 360° rotation of sensor.
Bracket slots allow for up to 1.5 in of vertical adjustment in each slot, and 3.5 in
of overall positioning adjustment.
6150E-6502
Mounting Bracket Right Angle—Ball Swivel
Provides for full 360° rotation of sensor. Ball swivel allows for ±30° sensor angle. 6150E-6503
Retroreflectors
Retroreflectors and retroreflective tape, see Tab 8, section 8.1 —
Connector Cables
For use with connector version sensors, see Tab 10, section 10.1 —
Dimensions, see Page V8-T5-25.
Description
AC/DC
EM Relay Model
Specification
AC/DC
Solid-state Relay Model
Specification
DC Only
Standard Range Model
Specification
DC Only
Extended Range Model
Specification
Input voltage 12–240 Vdc; 24–240 Vac 12–240 Vdc; 24–240 Vac 10–40 Vdc 10–40 Vdc
Light/dark operation Switch selectable Switch selectable Switch selectable Switch selectable
Operating temperature –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C) –13° to 131°F (–25° to 55°C)
Humidity 95% Relative humidity, non-condensing 95% Relative humidity, non-condensing 95% Relative humidity, non-condensing 95% Relative humidity, non-condensing
Case material Fiberglass reinforced plastic Fiberglass reinforced plastic Fiberglass reinforced plastic Fiberglass reinforced plastic
Lens material Acrylic Acrylic Acrylic Acrylic
Vibration IEC 60947-5-2 part 7.4.2 IEC 60947-5-2 part 7.4.2 IEC 60947-5-2 part 7.4.2 IEC 60947-5-2 part 7.4.2
Shock IEC 60947-5-2 part 7.4.1 IEC 60947-5-2 part 7.4.1 IEC 60947-5-2 part 7.4.1 IEC 60947-5-2 part 7.4.1
Protection — Output short circuit and
overcurrent protection
Reverse polarity protection
Output short circuit and
overcurrent protection
Reverse polarity protection
Output short circuit and
overcurrent protection
Reverse polarity protection
Enclosure ratings IP67, IP69K IP67, IP69K IP67, IP69K IP67, IP69K
Output load 3A at 120 Vac; 3A at 240 Vac
3A at 28 Vac
300 mA at 240 Vac/dc 250 mA at 40 Vdc 250 mA at 40 Vdc
Response time 15 ms 2 ms 2 ms 2 ms
Timer timing response 0–15 sec. 0–15 sec. 0–15 sec. 0–15 sec.
No load current <30 mA <30 mA <30 mA <30 mA
Leakage current (max.) — 1 mA at 240 Vac <10 μA <10 μA
Indicator LEDs Green: output; yellow: power;
red: alignment
Green: output; yellow: power;
red: alignment
Green: output; yellow: power;
red: alignment
Green: output; yellow: power;
red: alignment
Emitter LED
Diffuse, infrared fiber
optic, thru-beam models
Infrared 880 mm Infrared 880 mm Infrared 880 mm Infrared 880 mm
Reflex, polarized reflex,
clear object, visible fiber
optic units
Visible red 660 mm Visible red 660 mm Visible red 660 mm Visible red 660 mm
Mounting Bracket
Right Angle—Short
Mounting Bracket
Right Angle—Tall
Mounting Bracket
Right Angle—
Ball Swivel