Cut Sheet

Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com V8-T5-95
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.9
Photoelectric Sensors
E67 Long Range Perfect Prox Series Sensors
Technical Data and Specifications
E67 Long Range Perfect Prox Series Sensors
Excess Gain
Nominal Unit with Fixed 79 in Sensing Range
Notes
1
IMPORTANT: Output will reset automatically when short is removed (there is no visual indication of a short circuit condition).
2
CAUTION: Will not protect against overloads between 100 mA and 250 mA.
3
IMPORTANT: Do not expose to concentrated acids, alcohols or ketones.
4
These products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications.
Description AC/DC Models DC Only Models
Input voltage 20 to 132 Vac, 50/60 Hz
20 to 132 Vdc
18 to 30 Vdc
Power dissipation 2W maximum 0.5W maximum
Output type Solid-state relay, 1500 V isolation NPN and PNP
Voltage switching capacity 400 Vac/dc 30 Vdc
Current switching capacity 75 mA maximum 100 mA maximum
OFF-state leakage 100 μA maximum 50 μA maximum
ON-state characteristics 35 ohms maximum resistance NPN: 1.5V drop at 100 mA, maximum
PNP: 2.5V drop at 100 mA, maximum
Short circuit protection Thermally current limited at
approximately 200 mA
1
Protected against dead shorts only
12
Response time 50 ms 15 ms
Light/dark operation Specified by catalog number Specified by catalog number
Temperature range
Operating –31° to 131°F (–35° to 55°C) –31° to 131°F (–35° to 55°C)
Storage –40° to 158°F (–40° to 70°C) –40° to 158°F (–40° to 70°C)
Description All Models
Material of construction Enclosure: Lexan
®
Polycarbonate; back cover: Cycoloy
®
Polycarbonate/ABS;
indicator viewing window: Lexan
®
Polycarbonate; jam nut and connector:
15% glass-filled nylon 6/6; Threaded inserts: Brass
3
Mounting Jam-nut: Do not exceed 100 in-lbs mounting torque, minimum panel thickness 0.150 in
Side-mounting: Sensor includes 2 sets of #10–32 threaded inserts
Tighten to no more than 35 in-lbs
Use #10–32 x 0.250 in fasteners with split-type washer for panel thickness between 0.048 in and 0.080 in
For other panel thicknesses, choose fastener and washers to ensure minimum thread engagement of
0.120 in and a maximum thread engagement of 0.155 in
Connector models Micro-connector, 4-pin male
Vibration and shock Vibrations: 10g over 10 Hz to 2 kHz; shock: 30g for 6 ms 1/2 sine wave pulse
Indicator LED Red: Lights steady when output is on; green: Lights steady when power is applied to sensor
Sunlight immunity 5000 ft-candles
Enclosure ratings NEMA 1, 2, 3, 4, 4X, 6, 12 and 13
4
1000
4000
10
1
10 20 30 400.1 50 60 70 100
RANGE (inches)
EXCESS GAIN
100
RANGE (cm)
25 51 77 102 127 1521782.5 254