Installation Manual

108646 Rev 01Cutler-Hammer
Cutler-Hammer
720 80th Street SW; Everett, WA 98203-6299
425/513-5300 Fax: [phone]
www.cutlerhammer.eaton.com
Effective 2/25/98
Printed in U.S.A.
108646 Rev 01
Instruction Manual:
Global Proximity Sensors
WIRING DIAGRAMS (Pin numbers are for reference only, rely on pin location when wiring.)
AC 2-Wire - NO or NC
Micro-Connector, Face View Male
Load
L2
L1
*
* Internally connected to sensor case
(use of this wire is optional)
DC 2-Wire Cable NPN - NO
BU
BN
(-)
+V
Load
DC 2-Wire NPN - NO
Micro-Connector, Face View Male
(-)
+V
Load
DC 2-Wire Cable PNP - NO
BU
BN
(-)
+V
Load
DC 2-Wire PNP - NO
Micro-Connector, Face View Male
+V
(-)
Load
DC 3-Wire Cable NPN - NO
BU
BN
(-)
+V
BK
Load
DC 3-Wire NPN - NO
Micro-Connector, Face View Male
(-)
+V
Load
DC 3-Wire NPN - NO or NC
Nano-Connector, Face View Male
(-)
+V
Load
DC 3-Wire Cable PNP - NO
BU
BN
(-)
+V
BK
Load
(-)
+V
DC 3-Wire PNP - NO
Micro-Connector, Face View Male
Load
DC 3-Wire PNP - NO or NC
Nano-Connector, Face View Male
(-)
+V
Load
DC Models
AC 2-Wire Cable - NO
BU
BN
Load
L2
L1
Yellow/Green
* Internally connected to sensor case
(use of this wire is optional)
*
Cable Models Micro-Connector Models Nano-Connector Models
AC Models
Cable Models Micro-Connector Models
SPECIFICATIONS
DC Models AC Models
Operating Voltage 10 to 30 VDC 20 to 250 VAC
No Load Current <10 mA <1.8 mA
Maximum Load Current 200 mA 400 mA
Minimum Load Current - - - 5 mA
Surge Current - - - 5A (20 mS)
Leakage < 0.01 mA 1.8 mA
Voltage Drop <1.5 V <8 VAC at 400 mA
Switching 8 mm diameter 2 kHz (shielded & unshielded) 25 Hz (all models)
Frequency 12 mm diameter 2 kHz (shielded); 1 kHz (unshielded)
18 mm diameter 1 kHz (shielded); 500 Hz (unshielded)
30 mm diameter 300 Hz (shielded); 150 Hz (unshielded)
Short Circuit Protection Yes No
Overload Trip Point 220 mA - - -
Time Delay Before Availability <10 mS - - -
Transient Protection 1 kv, 0.1 mS, 1 KW - - -
Switching Hysterisis <15%
Repeat Accuracy <1.0% (Sr)
Operating Temperature -25° to 70° C (0° to 60° C for 8 mm diameter models)
Temperature Drift <10% (Sr)
Protection IP67
Housing Material Nickel plated brass (Stainless steel for 8 mm diameter,
nano-connector models)
Cable PVC, 2-meters long
Maximum 8 mm diameter *5.5 Nm (4 Lb. Ft.)
Torque 12 mm diameter *5.5 Nm (4 Lb. Ft.)
18 mm diameter 20 Nm (15 Lb. Ft.)
30 mm diameter 41 Nm (30 Lb. Ft.)
INTRODUCTION
The Global Inductive Proximity Sensor Line is a
new family of sensors created with the high
volume OEM in mind. Models are available in
8mm, 12mm, 18mm and 30mm body diameters.
* Lockwashers are recommended
between nuts.
* Lockwashers are recommended between nuts. For high vibration installation use a suitable
locking compound.
WARNING
These products are not designed,
tested, or recommended for use
in human safety applications.