User`s guide

Monitored ePDU Web Interface
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
14
Figure 6. ePDU Status Window (Typical)
Readings
The READINGS screen presents the current readings of the unit and functions as the
Home screen. This screen is displayed immediately after a user logs in.
CURRENT MEASUREMENTS: This field displays the names of each channel. The
values show how much current is being drawn by each channel. The number of
channels in this field varies because different models have a different number of
channels.
TEMPERATURE MEASUREMENT: This value is displayed when Temperature Alarm
Settings in the configuration page is enabled. Accessory probes can be purchased
from Eaton.
NOTE If a temperature sensor is enabled in the software but a sensor is not physically installed and/or
connected, a default temperature of >200°F or <20°F will be displayed.
Accessory Description
SENSOR-T1-10 Temperature Sensor with10 ft cable (1)
SENSOR-T2-10 Temperature 1 and Temperature 2 Sensors on 10 ft cable with Y adapter
SENSOR-T1H1-10 Temperature and humidity sensor with 10 ft cable
SENSOR-T2H1-10 Temperature 1 and Humidity sensor on 10 ft cable with Y adapter +
Temperature 2 sensor with 10ft cable