User`s guide
Switched ePDU Initial Configuration
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
30
4. Select option 3 (Unit Configuration), then option 2 (Network Configuration). The
following menu displays:
−− Network Settings Sub Menu −−
1− *Use DHCP: Disabled
2− *Unit IP Address: 166.99.182.215
3− *Subnet Mask: 255.255.255.0
4− *Default Gateway: 166.99.182.250
−− MAC Address: 00:04:F3:00:06:35
5− *Telnet Access: Enabled
6− *Telnet Port: 23
7− *Web Access: Enabled
8− *Secure Server: Disabled
9− *Web Port: 80
A− Ping Enabled: Disabled
B− Ping Interval: 60 (minutes)
C− *Serial Baud Rate: 9600
D− SNMP Menus
* − require soft reboot to take effect.
−− Other Choices −−
<ESC> = Back
<s> = Outlet/Environmental status
Select Item Number:
5. TCP/IP settings are automatically configured when Use DHCP is enabled. TCP/IP
settings can be manually configured when Use DHCP is disabled by changing the
IP address, subnet mask, and default gateway settings.
6. Select option 6 from the Main Menu to implement a soft reboot. Changes to the
network settings do not take effect until the Switched ePDU is rebooted.