User`s guide

Switched ePDU Initial Configuration
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
31
Configuration Through the Network Connection
NOTE The Switched ePDU comes with a default IP address of 192.168.168.168. If you are unable to
connect to the Switched ePDU through the network connection with this default address, change the IP
address using the serial interface before using any of the network interfaces.
Accessing the Web Interface
The Web interface can be accessed using any standard Web browser that supports
JavaScript and 64-bit encryption. Up to 11 users can be logged in to the Web interface
at a time regardless of serial or Telnet connections. Web access is enabled by default,
but the Admin user can disable it on the Network Settings menu using a serial or
Telnet interface, or from the Web interface Network Configuration page.
To access the Web interface:
1. Open your Web browser and navigate to the Switched ePDU's IP address (for
example: http://192.168.168.168/).
2. Enter Admin for the default username and ipc for the default password at the
login prompt (both are case-sensitive). See Figure 12.
Figure 12. Login Prompt (Typical)