User`s guide

Switched ePDU Admin Using Serial or Telnet
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
42
Outlet Groups
−− Outlet Groups Sub Menu −−
Name Outlets
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
1 Servers 1,2,3,4
2 Switches 9,10,11
3
4
5
6
7
8
−− Other Choices −−
<b> = Back
<s> = Outlet/Environmental status
Select Group Number:
Outlet Groups are used to control several outlets with one command. To create a new
group, enter the line number of any blank line. The ePDU then prompts for a group
name and the numbers of the outlets to be included in the group, as in the following
example:
Select Group Number: 3
Enter New Outlet Group Name: Fans
Outlet Group Format is 1,2,3 where each location is an outlet.
Example: 1,4,6,7 means outlets 1, 4, 6 & 7 are the
only outlets to be part of this group.
17,18,19,20
−− Outlet Groups Sub Menu −−
Name Outlets
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
1 Servers 1,2,3,7,8
2 Switches 5,9,10,11
3 Fans 17,18,19,20
4
5
6
7
8
−− Other Choices −−
<ESC> = Back
<s> = Outlet/Environmental status
Select Group Number:
Outlet Groups can be modified or deleted by entering the line number of an existing
group and following the prompts.