User`s guide

Switched ePDU Admin Using Serial or Telnet
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
45
Outlet Startup Mode
−− Outlet Startup Mode −−
The current Outlet Startup mode is Default−−Last State.
1− Default−−Last State
2− Sequence−−Sequence Routine
−− Other Choices −−
<ESC> = Back
<s> = Outlet/Environmental status
Select Item Number:
Outlet Startup Mode refers to the outlet startup sequence when power is connected
to a Switched ePDU. By default, the outlets that were on when the Switched ePDU
lost power are turned on simultaneously shortly after power is restored. If Sequence
Routine is selected, the Switched ePDU initiates a Global Sequence On command
after it boots up (there may be a 45-second delay before outlets begin to turn on). The
Sequence setting in the Outlet Configuration can be used to customize the outlet
sequence pattern, as well as to exclude certain outlets from being turned on.
Environmental Settings
−− Environmental Configuration Sub Menu −−
1− Temperature Sensor(s) Setup
2− Humidity Sensor Setup
3− Contact Closure Switch(es) Setup
4− Voltage/Current Threshold Setup
5− Display Sensor Measurements
6− Display VA Measurements
−− Other Choices −−
<ESC> = Back
<s> = Outlet/Environmental status
Select Item Number: