User`s guide

Switched ePDU Admin Using Serial or Telnet
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
59
Table 15. Log/Alert Configuration
Section Setting Description
Events To Log
User Login/Logout Enabled or Disabled.
When enabled, an entry is added to the log each time a user
logs in to or logs out of the serial, Telnet, or Web interfaces.
Failed Login Attempt Enabled or Disabled.
When enabled, an entry is added to the log when a user tries
unsuccessfully to log in to the serial, Telnet, or Web interfaces
three times in a row due to an invalid username or an invalid
password.
Outlet Activity Enabled or Disabled.
When enabled, an entry is added to the log each time an outlet
action occurs.
System On/Off Enabled or Disabled.
When enabled, an entry is added to the log each time the
Switched ePDU completes booting up.
Alerts To
Send
User Login/Logout Enabled or Disabled.
When enabled, an e-mail alert is sent each time a user logs in to
or logs out of the serial, Telnet, or Web interfaces.
Failed Login Attempt Enabled or Disabled.
When enabled, an e-mail alert is sent when a user fails to log in
three times in a row with an invalid username or password to
the serial, Telnet, or Web interfaces.
Outlet Activity Enabled or Disabled.
When enabled, an e-mail alert is sent each time an outlet action
takes place.
System On/Off Enabled or Disabled.
When enabled, an e-mail alert is sent each time the Switched
ePDU completes booting up.
Voltage/Current
Threshold
Enabled or Disabled.
When enabled, an e-mail alert is sent each time the measured
voltage or current rises above the upper threshold or falls below
the lower threshold (as set in the “Voltage/Current Threshold
Setup” on page 49).
Temperature
Threshold
Enabled or Disabled.
When enabled, an e-mail alert is sent each time the measured
temperature for an enabled temperature sensor rises above the
upper threshold or falls below the lower threshold (as set in the
“Temperature Sensor Setup” on page 46).
Humidity Threshold Enabled or Disabled.
When enabled, an e-mail alert is sent each time the measured
humidity for an enabled humidity sensor rises above the upper
threshold or falls below the lower threshold (as set in the
“Humidity Sensor Setup” on page 47).
Contact Threshold Enabled or Disabled.
When enabled, an e-mail alert is sent each time an enabled
contact sensor changes state from Closed to Open or from Open
to Closed.