User`s guide

Switched ePDU Admin Using Serial or Telnet

Eaton

User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1

Outlet-Environmental Status

−− Outlet State Sub Menu −−

1− Outlet Section 1 (1−8)

2− Outlet Section 2 (9−16)

3− Outlet Section 3 (17−24)

4− Environmental Sensors

−− Other Choices −−

<b> = Back

<s> = Outlet/Environmental status

Select Item Number:

This menu is available from the Main Menu as option 4 and also throughout much of

the interface by pressing the [s] key. The number of sections are listed as they are

present on the Switched ePDU.

Outlet Section

Selecting the option for any outlet section displays an outlet status screen:

−− Outlet Control Sub Menu −−

Outlet Section 1 Measurements

Voltage: 121 V

Current: 0.0 A

Power: 0.0 VA

Outlet Name Current State

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

1 HP Server On

2 PowerEdge Server Off

3 Exchange Server On

4 Disk Array 1 On

5 Switch 1 Off

6 Disk Array 2 On

7 Citrix Server On

8 Backup Server On

−− Other Choices −−

<b> = Back

<s> = Outlet/Environmental status

<n> = Next outlet section

Select Item Number:

The measured voltage, measured current, and calculated apparent power are

displayed at the top of the page. For all single-phase Switched ePDUs (8-outlet,

16-outlet, and some 24-outlet Switched ePDUs), these values correspond to what is

measured for the displayed outlet section. For three-phase Switched ePDUs (most

24-outlet Switched ePDUs), these values are measurements of phase voltage and

phase current and the calculated phase power; values displayed for section 1

correspond to phase X, those for section 2 correspond to phase Y, and those for

section 3 correspond to phase Z. Be sure to read the label next to the measurements

for an exact description.