User Manual
12/06 AWB2724-1584GB
Changing the menu language
37
Changing the menu language
Two menu languages can be selected. These can be set via the
System menu.
X Press DEL and ALT to call up the System menu.
X Select MENU LANGUAGE… to change the menu language.
The language selection for the first
entry ENGLISH is displayed.
X Use Í or Ú to select the new menu
language.
X Confirm with OK. The language
will be assigned a tick.
X Exit the menu with ESC.
The new menu language is active.
Press ESC to return to the Status display.
Setting date and time
The devices are provided with a real-time clock with date and time.
Set the hour, minute, day, month and year during initial
commissioning.
X Select SET CLOCK… from the main menu.
This will open the menu for setting
the time.
X Select SET CLOCK.
X Set the values for time, day,
month and year.
X Press the OK button to access the
Entry mode.
–
úí Move between the places.
– ÍÚ Change the value of a parameter
–OK Save day and time
– ESC Retain previous setting.
Press ESC to leave the time setting display.
Startup behaviour
Setting the startup behaviour
The following start options can be set via the menu:
• HALT
•WARMSTART
•COLDSTART
X Switch to the System menu.
X Set the Startup behaviour.
Language Display
English ENGLISH
German DEUTSCH
h
The language selection is only available if the controller is
not protected by a password.
ENGLISH
DEUTSCH å
h
If the controller is password-protected, the System menu
is only available after the password has been entered.
a section “Access with password protection”, page 36.
SET CLOCK
HH:MM: 00:27
DD.MM 05.05
YEAR : 2002