Cut Sheet

Volume 10—Enclosed Control CA08100012E—November 2012 www.eaton.com V10-T5-3
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.1
Reduced Voltage Starter
S611 Solid-State Soft Stater
User Interface Module (UI)
The S611 has an easy to use
User Interface Module (UI)
that allows the user to
configure the device and to
read system parameters and
values. The UI includes an
LED display and keypad to
scroll through the various
parameters. The UI allows
the user to modify control
parameters, enable or
disable protections, set
communication variables,
monitor system values such
as line voltages and currents
and access the fault queue.
The UI can be removed from
the S611 and remote mounted.
Kits are available to door
mount the DIM, enabling
users to safely configure,
commission, monitor and
troubleshoot the system at
the electrical panel without
opening the enclosure door.
Factory assembled units are
supplied with door mounted
keypad. If door mounted
keypad is not needed,
consult factory.
User Interface Module (UI)
Options
S611
Pump Control Option
●
Designed to reduce
“water- hammer” during
start-up and stopping
sequences
●
Stop ramp extended to 120
seconds to help control
larger motors and systems
with long piping runs
Additional Reference
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ta b 1 4
Accessories and Modifications . . . . . . . . . . . . . . Ta b 1 5
Technical Data and Specifications . . . . . . . . . . . . Ta b 1 7
Description
Modification
Code
Pump control option Standard
Door mounted keypad Standard
Extended ramp R1
Communications
The S611 has built-in
communication capabilities
through two communications
ports to connect the soft starter
to a variety of networks,
including Modbus (resident),
DeviceNet™, PROFIBUS
®
,
and Ethernet.
The S611 communication
parameters can be configured
with the UI or through the
Fieldbus.
Advanced communication
configuration settings provide
the system integrator with
powerful tools to facilitate
system optimization.
Network Communications Reference
Standards and Certifications
See Tab 17 for additional
information on standards and
certifications that apply to all
enclosed control products.
●
UL Listed
●
IEC 947-4-2
●
EN 60947.2 (for motor
controller)
●
cUL (indicates appropriate
CSA Standard investigation)
●
ABS Type Approved
Description Catalog Number
Modbus communication adapter without I/O C441M
Modbus communication adapter with 120 Vac I/O C441N
Modbus communication adapter with 24 Vdc I/O C441P
DeviceNet communication adapter with 120 Vac I/O C441K
DeviceNet communication adapter with 24 Vdc I/O C441L
PROFIBUS communication adapter with 120 Vac I/O C441S
PROFIBUS communication adapter with 24 Vdc I/O C441Q
EtherNet/IP and Modbus TCP communication adapter with 120 Vac I/O C441R
EtherNet/IP and Modbus TCP communication adapter with 24 Vdc I/O C441T
Communication adapter C440-COM-ADP