Cut Sheet
V10-T9-2 Volume 10—Enclosed Control CA08100012E—November 2012 www.eaton.com
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9.1
Type 7/9 Hazardous Location Starters
NEMA Cast Aluminum Enclosed Starters
NEMA Cast Aluminum Enclosed Starters
Contents
Description Page
NEMA Cast Aluminum Enclosed Starters
Standards and Certifications . . . . . . . . . . . . . . V10-T9-3
Code Definitions . . . . . . . . . . . . . . . . . . . . . . . V10-T9-3
Additional Reference . . . . . . . . . . . . . . . . . . . . V10-T9-3
Catalog Number Selection . . . . . . . . . . . . . . . . V10-T9-4
Cover Control . . . . . . . . . . . . . . . . . . . . . . . . . . V10-T9-5
Freedom Full Voltage Non-Combination . . . . . . V10-T9-6
Freedom Full Voltage Combination . . . . . . . . . V10-T9-9
Other Hazardous Location Control . . . . . . . . . . V10-T9-12
Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . V10-T9-13
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . V10-T9-18
Product Description
Eaton’s combination and
non-combination hazardous
location cast aluminum motor
starters are used in areas
where hazardous materials
are handled or stored. These
units provide disconnecting
means, under voltage
protection, circuit protection
and motor running protection.
Features
●
65,000 AI cUL classified—
highest interrupt rated
enclosure in the industry
●
Copper-free cast aluminum
●
Precision machine flame
path between box and
cover
●
Bolt-on slotted mounting
feet
●
Stainless steel block
hinges
●
Stainless steel, captive
quad-lead cover bolts
(disengaged in 1-1/2 turns)
●
External stainless steel
breaker operating handle
●
Breaker and operator
shafts are stainless steel
●
Ground lug package and
installation instructions for
termination of ground wire
enclosed
●
Four point control terminal
block, NEMA 1B with wire
markers
●
Breaker operators can be
locked in the ON or OFF
position (combination
starters only)
●
Four plugged 3/4 in NPSM
outlets drilled and tapped
for control devices
●
Standard outlets top and
bottom
●
Plugged 1/2 in outlets top
and bottom for breather/
drain
●
Components are mounted
on a galvanized steel
removable pan
●
O-ring gasket ensures
watertight integrity
Standard Materials
●
Bodies and covers: copper-
free aluminum
●
Cover bolts: stainless steel
●
O-ring: neoprene
●
Hinges: stainless steel
Finishes
●
Bodies and covers:
corrosion resistant grey
epoxy power coat inside
and outside standard to
provide Type 4X