Cut Sheet

Volume 10—Enclosed Control CA08100012E—November 2012 www.eaton.com V10-T10-3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10.1
Multi-Pak Group Control
Modules and Enclosures
Combination Starter Modules
Starter modules consist of an
A200 magnetic linestarter
prewired with a motor circuit
protector or a fusible DS
disconnect switch on a panel.
Full voltage non-reversing and
reversing combination
starters are available. An
external RESET button is
mounted on the starter
module door. With its
versatile modular design, the
Multi-Pak starter permits a
variety of motor control
groupings. One module can
contain many different
arrangements of devices
such as combination
linestarters with control
transformers, and/or relays,
two-feeder circuit breakers or
fusible switches.
Feeder Modules
Like combination starter
modules, breaker/switch
modules are factory
assembled on a formed steel
panel. They are shipped
complete with a door for field
mounting. The module and
door for feeder breakers
through 100A or 30A and 60A
fusible switches are normally
furnished with a single
breaker or switch in the top
position with provisions for
field mounting a second
device in the lower position.
A kit contains the operator,
spacers, insulation and
necessary hardware for
adding a second device.
Feeder modules for higher
ratings are single units only.
Standards and
Certifications
Note: See Ta b 17 for additional
information on standards and
certifications that apply to all
enclosed control products.
●
UL Listed
●
cUL Listed
●
ABS Type Approved
Additional Reference
Heater Selection . . . . . . . . . . . . . . . . . . . . . . . . . . V10-T10-7
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . V10-T10-11
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V10-T10-12