Cut Sheet
V10-T15-12 Volume 10—Enclosed Control CA08100012E—June 2015 www.eaton.com
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15.1
Accessories and Modification Codes
Accessories
Mechanical Interlock and Reversing Kits
Mechanical interlocks and
reversing kits are designed
for field assembly of
reversing contactors or
starters from Freedom Series
components. The reversing
kits include a mechanical
interlock, stabilizer bar and
a pre-cut, trimmed and
formed wire set. Auxiliary
contacts, if required, must be
ordered separately. See
Page V10-T15-2.
Mechanical Interlock Only
12
Reversing Kits (Horizontal Contactor Mounting Only)
Application
Catalog Number
NEMA
Size
Contactor
Mounting
00–2 Horizontal C321KM60B
3 Horizontal C321KM30
3 to 4 Horizontal C321KM43
4 Horizontal C321KM40
4 to 5 Horizontal C321KM45
4 to 6 Horizontal C321KM80
5 Horizontal C321KM50
5 to 6 Horizontal C321KM56
6 Horizontal C321KM70
6 to 7 Horizontal C321KM90
7 Horizontal C321KM34
4 or 5 to 6 Vertical C321KM55
5 to 6 Vertical C321KM65
6 Vertical C321KM66
6 to 7 Vertical C321KM67
Application
Catalog Number
Application
Catalog NumberNEMA Size NEMA Size
00 C321KM60K14B — C321KM60K21
3
0 C321KM60K13B — C321KM60K18
3
1 C321KM60K15B 4 C321KM60K19
3
2 C321KM60K16B 5 C321KM60K20
3
3 C321KM60K17
3
— C321KM60K44
3
Mechanical Interlock
Solid-State Timers
Solid-State ON DELAY Timer—Side-Mounted on Freedom Series
NEMA 00–2 and C25D, C25E and C25F Frame
This timer is designed to be
wired in series with the
load (typically a coil). When
the START button is pushed
(power applied to timer), the
ON DELAY timing function
starts. At the completion of
the set timing period, timer
and series wired load will
both be energized.
Mounted Timer Product Selection
Pneumatic Timers—Top-Mounted
Attachment mounts on top
of any NEMA Size 00–2
Freedom Series starter or
contactor (top-mounted
auxiliary contacts can not be
installed on device when timer
is used). Timer unit has 1NO-
1NC isolated timed contacts—
circuits in each pole must be
the same polarity. Units are
convertible from OFF to ON
DELAY or vice-versa.
Product Selection
Maximum Ampere Ratings
Notes
1
Without cross-wiring.
2
For use with latest series product.
3
Kit includes two NC auxiliary contacts.
4
Add operating voltage suffix to catalog number. A = 120V, B = 240V, E = 208V.
5
Rated 0.5A pilot duty—not to be used on larger contactors.
6
Terminal connections are quick connects only. Two per side.
Timing Range Catalog Number
456
0.1–1.0 seconds C320TDN1_
1–30 seconds C320TDN30_
30–300 seconds C320TDN300_
5–30 minutes C320TDN2000_
Solid-State Timer
Timing Range Catalog Number
0.1–30 seconds C320TP1
10–180 seconds C320TP2
Description
Volts AC
120 240 480 600
Make 30 15 7.5 6
Break 3 1.5 0.75 0.6
Pneumatic Timer