Cut Sheet

V10-T15-36 Volume 10—Enclosed Control CA08100012E—June 2015 www.eaton.com
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15.1
Accessories and Modification Codes
Accessories
IT. Solid-State Soft Starters
Surge Suppressors for S801+/S811+
The surge suppressor can
mount on either the line or
load side of the IT. soft
starter. It is designed to clip
the line voltage (or load side
induced voltage).
Surge Suppressors
Lug Kits for S801+/S811+
The 200 mm and 290 mm soft
starters do not include lugs.
The 200 mm and 290 mm
soft starters each have
different lug options based on
your wiring needs. Each lug
kit contains three lugs which
can be mounted on either the
load or line side.
Lug Kits
Lug Cover Kits for S801+/S811+
Replacement covers for the T
and V Frame are available in
case of damage to the
existing covers.
Lug Cover Kits
Description Catalog Number
600V MOV for IT. soft starters EMS39
690V MOV for IT. soft starters EMS41
Surge Suppressor
Frame
Size
Frame
Designation Description
Catalog
Number
200 mm
SSRV
T, U 2 cable connections,
4 AWG to 1/0 cable
EML22
1 cable connection,
4/0 to 500 kcmil cable
EML23
2 cable connections,
4/0 to 500 kcmil cable
EML24
1 cable connection,
2/0 to 300 kcmil cable
EML25
2 cable connections,
2/0 to 300 kcmil cable
EML26
290 mm
SSRV
V 2 cable connections,
4/0 to 500 kcmil cable
EML28
4 cable connections,
4/0 to 500 kcmil cable
EML30
6 cable connections,
4/0 to 500 kcmil cable
EML32
4 cable connections,
2/0 to 300 kcmil cable
EML33
1
Lug Kits
Description Catalog Number
Lug cover T, U Frame EML27
Lug cover V Frame EML34
Digital Interface Module and Control Interface Module
The Digital Interface Module
(DIM) and control interface
module are available as
replacement parts.
DIM and CIM
Control Wire Connector
Control Wire Connector
User Manual for S811+
A comprehensive user
manual is available and can
be downloaded free of charge
from www.eaton.com by
performing a document
search for MN03902002E.
Mounting Plates for S801+/S811+
The mounting plates are
designed to help make it easy
to install or retrofit the soft
starter into enclosures and
MCCs. The soft starter can
be mounted onto the plate
prior to installation. The
mounting plate is designed
with tear drop mounting
holes for easier installation.
Mounting Plates
Note
1
The EML33 does not have a CSA Listing.
Description Catalog Number
Blank cover (filler) EMA68
DIM for S811+ EMA91
CIM for S801+ EMA71
CIM for S801+ pump control option EMA72
Panel mounting kit
3 ft cable EMA69A
5 ft cable EMA69B
8 ft cable EMA69C
10 ft cable EMA69D
Description Catalog Number
12-pin, 5 mm pitch connector for control wiring EMA75L
Description Catalog Number
Mounting plate N Frame EMM13N
Mounting plate R Frame EMM13R
Mounting plate T, U Frame EMM13T
Mounting plate V Frame EMM13V
Fan/hood accessory EMM18