Cut Sheet

V10-T17-2 Volume 10—Enclosed Control CA08100012E—November 2012 www.eaton.com
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17.1
Technical Data and Specifications
General Standards and Ratings
Standards and Certifications
UL File Numbers
The enclosed control
products from Eaton’s
electrical sector are covered
by three UL file numbers.
Where UL or UL 508 is listed
under the Standards and
Certifications headers in this
catalog or labeled on the
products, the following UL
file numbers apply. For
example: ECN0521AAA is
covered by UL file number
E19224, while ECS92S1EAF
is covered by UL file number
E175513.
●
E19224—Non-Combination
Motor Controllers
●
E176513—Combination
Motor Controllers
●
E195239—Power
Conversion Equipment
ABS Type
Approval
The Eaton
enclosed control
products have been tested
and approved for American
Bureau of Shipping
standards. Both a Product
Quality Assurance and
Design Assessment
approvals must be met in
order to comply to ABS Type
Approval. The following are
Eaton’s ABS file numbers for
products:
●
QA-1597-X—Product
Quality Assurance
●
63-HS385744-PDA—
Design Assessment
cUL Label
The Eaton
enclosed
control
products have been tested
and approved for Canadian
UL where cUL is listed in this
catalog under the Standards
and Certifications headers or
labeled on the products. The
cUL label also indicates that
the appropriate CSA
Standard has been
investigated. The following
numbers demonstrate cUL
approval:
●
E19224—Non-Combination
Motor Controllers
●
E176513—Combination
Motor Controllers
●
E195239—Power
Conversion Equipment
CE Label
Where the CE label
is applied or certification is
mentioned, Eaton has
undergone the proper testing
to meet or exceed CE
requirements. As CE is a self-
administered certification, no
CE file number is available.
However, several products
have undergone KEMA KEUR
testing, a third party CE-
certification testing agency.
KEMA reference numbers are
available upon request.
Other standards and
certifications may apply as
noted in product literature.
For additional reference
information, refer to the
Consulting Application Guide
or your local Eaton distributor.
Component Standards and
Certifications
The standards and certifications
described in this catalog are
for enclosed control products
from Eaton’s electrical sector.
Testing has been done on the
complete enclosed assembly
in order to achieve these
certifications. For additional
information on the standards
and certifications for the
components used in Eaton’s
enclosed control, please refer
to the Eaton Control Products
Catalog.
Short-Circuit Testing
Interrupting ratings—
All Eaton enclosed control
products have been designed
and tested for short-circuit
interrupting capabilities.
Interrupting Ratings
●
Fusible—Sizes 1–5
suitable for use on a circuit
capable of delivering not
more than 100,000 rms
symmetrical amperes.
600V maximum where a
Class R fuse clip kit is
properly installed and Class
R fuses are used. If Class
R fuses are not used, the
switch should not be
installed on circuits capable
of delivering more than
10,000 rms symmetrical
amperes. Size 6 is limited
to 18,000 and Size 7 is
limited to 30,000 rms
symmetrical amperes
●
Circuit breaker HMCPE—
Sizes 1–3 controllers are
suitable for use on circuits
capable of delivering not
more than 100,000 rms
symmetrical amperes at
480V maximum; for 600V
applications not more than
25,000 rms symmetrical
amperes
●
HVAC panel and ECP
irrigation pump panel—
suitable for use on circuits
capable of delivering not
more than 10,000 rms
symmetrical amperes at
600V maximum