Cut Sheet

V10-T10-12 Volume 10—Enclosed Control CA08100012E—November 2012 www.eaton.com
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10.1
Multi-Pak Group Control
Modules and Enclosures
Dimensions
Approximate Dimensions in Inches (mm)
Dimension and Wiring Arrangements
Type 1 enclosures are 32 or
48 in (813 or 1219 mm) wide,
26 in (660 mm) high and 7 in
(178 mm) deep, with
provisions for four-bolt wall
mounting. Enclosures may be
grouped together by nippling
through the knockouts
provided.
Load and control conduits
may enter at the top or
bottom. Instructions for
overload heater installation
are attached to each starter
door.
Dust and weather resistant
enclosures for four- or six-
module units are available.
These enclosures are 34 or
50 in (864 or 1270 mm) wide,
31 in (787 mm) high and
11.75 in (298 mm) deep.
Approximate Dimensions and Wiring Arrangements, Four Module Unit
Note
Six-module units are 48 in wide.
Incoming Line at
Top or Side
(Either end)
Outgoing Conduits May Be All at Top, All at Bottom or Mixed
H Units at 32 (813) Each
Incoming Line at
Top or Side
(Either end)
26
(660)
Supply Fed Through Nipples
Hinges
3 (76)
6.13
(155.6)
7. 0 0
(177.8)
8.50
(215.9)
6.38
(161.9)
18.63
(473.1)
5.50
(139.7)
1.25
(31.8)
3.38
(85.7)
32 (812.8)
28 (711.2)
Four Mounting
Holes for 5/16 in
Bolts
Eight Knockouts
2/2.5 (51/64)
Eight
K nockouts 0.5/0.75/1 (12.7/19.1/25.4)
on 2.75 (69.9) Centers—Top
and Bottom
20
(508)
3
(76)
3.38
(85.7)
3
(76)
0.63
(15.9)
2
(50.8)
3 (76)
52
(1320)
Outgoing Conduits May Be All at Top, All at Bottom or Mixed
Supply Fed Through Nipples
One Compartment Used
to Feed Supply to Bottom
1, 2 or 3 Units at 32 (813) Each