Datasheet

DATASHEET - ETS4-VS3
Amplifier module, for separate mounting
Part no. ETS4-VS3
Catalog No. 083094


Delivery program
Rated operational current
  
AC-15   
240 V I
e
A 2
415 V I
e
A 2
DC   
Notes   Switch-on and switch-off conditions based on DC-13, time constant as specified.
DC-13 L/R - 300 ms   
220 V   
220 V I
e
A 0.03
Actuating voltage U
s
V DC 24
Actuating current I mA 25
Contact sequence  
For use with
  DILM...
DILMP...
DILL...
DILK...
DILMF…  As required
Description   Input with built-in suppressor circuit for overvoltage limitation
Instructions Contactor coils with rated operational current > 2 A must be actuated via the DILER-G mini contactor relay.
Technical data
General
Standards   IEC/EN 60947, VDE 0660, UL, CSA
Lifespan, mechanical   
DC operated Operations
x 10
6
30
Maximum operating frequency  Ops./h 
DC operated Operations
x 10
6
72000
Climatic proofing   Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature   
Open  °C -25 - +60
Enclosed  °C - 25 - 45
Mounting position   As required
Mechanical shock resistance (IEC/EN 60068-2-27)   
Half-sinusoidal shock, 20 ms  g 
N/O contact  g 10
Degree of Protection   IP20
Protection against direct contact when actuated from front (EN 50274)   Finger and back-of-hand proof
Weight  kg 0.09
Terminal capacities 
mm
2

Notes   Only use equal cross-sections.
12/27/2018 Eaton 083094 ED2018 V51.0 EN 1 / 4