Cut Sheet

ManualsBrandsEaton ManualsCircuit BreakersSeries C NEMA F-frame Molded Case Circuit Breaker

Effective March 2011

Supersedes February 2010

Technical Data TD01203013E

F-Frame circuit breaker

10–225 amperes

Product description

•

AllofEaton’sF-Framecircuitbreakersare

HACRrated

•

AllF-Framethermal-magneticcircuitbreakers

10–50AaresuitableforHID(highintensity

discharge)use

•

AllF-Framecircuitbreakersaresuitablefor

reversefeeduse

Table 1. Frame Trip Ratings

Frame Ampere Rating

EDB, EDS, EDH, EDC 100–225

EHD 10–100

FDB 10–150

ED, HFD, FDC, HFDDC 15–225

FD 15–225

FDE, HFDE, FDCE



80, 160, 225



The 80A FDE, HFDE, FDCE is adjustable from 15–80A.

The 160A FDE, HFDE, FDCE is adjustable from 60–160A.

The 225A FDE, HFDE, FDCE is adjustable from 100–225A.

Summary of content (12 pages)

PAGE 1
Technical Data TD01203013E Effective March 2011 Supersedes February 2010 F-Frame circuit breaker 10–225 amperes Product description • All of Eaton’s F-Frame circuit breakers are HACR rated • All F-Frame thermal-magnetic circuit breakers 10–50A are suitable for HID (high intensity discharge) use • All F-Frame circuit breakers are suitable for reverse feed use Table 1.
PAGE 2
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Table 2. ULT 489 Interrupting Capacity Ratings Interrupting Capacity (Symmetrical Amperes) Circuit Breaker Type Number of Poles EDB EDS ED EDH EDC d EHD 2, 3 2, 3 2, 3 2, 3 2, 3 1 2, 3 Volts AC (50/60 Hz) Volts DC Trip Type a 240 277 480 600 125 250 bc T/M N.I.T.
PAGE 3
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Dimensions in inches (mm) 4.12 (104.7) 6.00 (152.4) 3.38 (85.7) 1.38 (34.8) 3.38 (85.7) 4.13 (104.8) 6.00 (152.4) 4.12 (104.7) Figure 1. Single-Pole F-Frame Breaker Figure 3. Three-Pole F-Frame Breaker 4.12 (104.7) 6.00 (152.4) 2.75 (69.9) 3.38 (85.7) 5.50 (139.7) 3.38 (85.7) 6.00 (152.4) 4.12 (104.7) Figure 2. Two-Pole F-Frame Breaker Figure 4.
PAGE 4
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Front View 0.74 (18.8) 1.56 (39.7) 0.45 (11.4) diameter 2 holes 0.11 (2.8) diameter x 0.31 (7.9) deep, 1 hole accept #6 (M3.5) thread cutting screws 0.38 (9.5) Line End 0.19 R 0.75 (19.1) (4.8 R) Side View 1.77 (44.8) 0.75 (19.1) 0.08 (2.0) 1.03 (26.2) 1.41 (35.7) 2.72 (69.1) 0.47 0.63 (11.9) 0.27 (15.9) (6.8) Handle: 0.34 (8.7) wide x 0.38 (9.5) thick 0˚ taper, load end 7˚ taper, line end 0.82 (20.8) On Off 0.
PAGE 5
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Drilling Plans Front Cover Cutout Front Connected Rear Connected 0.75 (19.1) 0.25 (6.4) R Line End Line End 2.31 (58.8) 2.91 (73.8) 2.88 (73.0) 3.16 (73.0) 4.50 (114.3) Breaker handle 1.91 (48.4) 0.47 (11.9) Line End 1.19 (30.2) 0.59 (15.1) Breaker handle Breaker handle 5.06 (114.3) 0.19 (4.8) Diameter Load End 0.58 14.8) Location of 0.50 (12.7) diameter megger holes, if required Load End 1.38 (34.
PAGE 6
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Front View 0.74 (18.8) 1.56 (39.7) Side View 0.38 (9.5) Line End 0.75 (19.1) 0.13 (3.2) x 0.75 (19.1) slots 0.45 (11.4) diameter for attachment leads 4 holes 0.11 (2.8) diameter x .31 (7.9) deep, 2 holes accept #6 (M3.5) thread cutting screws 0.82 (20.8) 0.19 R (4.8 R) 1.38 (34.9) 0.16 (4.0) R On Off 0.38 2.72 (69.1) 1.72 (43.7) 0.02 (0.4) 0.69 (17.5) Push to trip 1.38 (34.9) 1.00 (25.4) 0.50 (12.7) 0.19 (4.
PAGE 7
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Drilling Plans Front Cover Cutout Front Connected Line End 0.25 (6.4) R 2.31 (58.8) 0.75 (19.1) Line End 0.47 (11.9) Line End 2.91 (73.8) 2.88 (73.0) Breaker handle 1.91 (48.4) Rear Connected 1.19 (30.2) 0.19 (4.8) diameter 0.59 (15.1) 0.58 (14.8) Breaker handle 3.16 (80.2) 4.50 (114.3) 5.06 (128.6) Breaker handle 1.38 (34.9) Location of 0.50 (12.7) diameter megger holes, if required Load End Load End 0.
PAGE 8
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Front View 0.74 (18.8) 1.56 (39.7) 0.20 (5.0) diameter hole 0.33 (8.3) diameter c'bore 1.94 (49.2) deep from top. 0.34 (8.7) diameter c'bore 0.66 (16.7) deep from bottom. 4 munting holes for .164-32 (No. 8) x 1.50 (M4 x 0.7 x 38.1) mounting screws. 0.45 (11.4) diameter 6 holes 1.38 (34.9) 1.38 (34.9) 0.19 (4.8)R 1.77 (44.8) 0.75 (19.1) 0.08 (2.0) 0.63 0.27 (15.9) (6.8) 0.82 1.03 (20.8) (26.2) 1.41 (35.7) 0.75 (19.
PAGE 9
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Drilling Plans Front Cover Cutout Front Connected Line End 0.75 (19.1) Line End 0.25 2.31 (58.8) Rear Connected 2.91 (73.8) 1.38 (34.9) Load End 0.58 0.59 (14.8) (15.1) 1.38 (34.9) 3.16 (80.2) 2.88 (73.0) Breaker handle 1.91 (48.4) 1.19 (30.2) 0.47 (11.9) Line End 4.50 (114.3) Breaker handle Breaker handle 5.06 (128.6) 0.19 (4.8) Diameter Location of 0.50 (12.7) diameter megger holes, if required 0.
PAGE 10
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Front View 0.74 (18.8) 1.56 (39.7) Side View Line End 0.75 (19.1) 0.125 (3.18) x 0.750 (19.05) slots 0.45 (11.4) diameter for attachment leads 8 holes 0.11 (2.8) diameter x 0.31 (7.9) deep, 4 holes accept #6 (M3.5) thread cutting screws 0.38 (9.5) 0.19 R (4.8) R 1.38 (34.9) 1.38 (34.9) 1.38 (34.9) 0.38 (9.5) 0.47 1.13 (11.9) (28.6) 0.82 (20.8) On Off 4.50 (114.3) 0.09 (2.3)R (Typ.) 4-PLCs ≥ 175A] 0.63 0.27 (15.
PAGE 11
Technical Data TD01203013E F-Frame circuit breaker Effective March 2011 Drilling Plans Front Cover Cutout Front Connected 0.25 (6.4) R Line End 2.31 (58.8) Rear Connected 0.75 (19.1) Line End 2.91 (73.8) 3.16 (80.2) 2.88 (73.0) Breaker handle 0.59 1.91 (48.4) (15.1) 0.47 (11.9) Line End 0.19 (4.8) diameter 1.19 (30.2) 5.06 (128.6) 4.50 (114.3) Breaker handle Breaker handle 0.58 (14.8) 1.38 (35.0) 1.38 (35.0) Location of 0.50 (12.7) diameter megger holes, if required 1.38 (35.
PAGE 12
Technical Data TD01203013E Effective March 2011 F-Frame circuit breaker Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com © 2011 Eaton Corporation All Rights Reserved Printed in USA Publication No. TD01203013E / Z10989 March 2011 Eaton is a registered trademark of Eaton Corporation. All other trademarks are property of their respective owners.