Cut Sheet

ManualsBrandsEaton ManualsCircuit BreakersBreaker, Molded Case, 70A, 3P, 600V, 35 kAIC, Type FD, Lugs

Electrical Sector Solutions

Volume 4 Circuit Protection

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

All other trademarks are property

of their respective owners.

Printed in USA

Publication No. CA08100005E / MSC

December 2010

Volume 4:

Circuit

Protection

Summary of content (702 pages)

PAGE 1
Electrical Sector Solutions Volume 4 Circuit Protection Eaton Corporation Electrical Sector 1111 Superior Ave. Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com © 2010 Eaton Corporation All other trademarks are property of their respective owners. All Rights Reserved Printed in USA Publication No.
PAGE 2
Volume 4—Circuit Protection Tab 1—Miniature Circuit Breakers and Supplementary Protectors . . . . . . . . . . . V4-T1-1 Tab 2—Molded Case Circuit Breakers . . . . . . . . . . . . V4-T2-1 Tab 3—Power Breakers, Contactors and Fuses . . . . . V4-T3-1 Appendix 1—Eaton Terms & Conditions . . . . . . . . . . V4-A1-1 Appendix 2—Catalog Parent Number Index . . . . . . . V4-A2-1 Appendix 3—Alphabetical Product Index . . . . . . . . .
PAGE 3
Copyright Dimensions, Weights and Ratings Dimensions, weights and ratings given in this catalog are approximate and should not be used for construction purposes. Drawings containing exact dimensions are available upon request. All listed product specifications and ratings are subject to change without notice. Photographs are representative of production units. Terms and Conditions All prices and discounts are subject to change without notice.
PAGE 4
Introduction Eaton is a global leader in power distribution, power quality, control and automation, and monitoring products. At Eaton, we believe a reliable, efficient and safe power system is the foundation of every successful enterprise. Through innovative technologies, cutting-edge products and our highly skilled services team, we empower businesses around the world to achieve a powerful advantage.
PAGE 5
Introduction Icons Green Leaf Eaton Green Solutions are products, systems or solutions that represent Eaton benchmarks for environmental performance. The green leaf symbol is our promise that the solution has been reviewed and documented as offering exceptional, industry-leading environmental benefits to customers, consumers and our communities.
PAGE 6
Miniature Circuit Breakers and Supplementary Protectors Miniature Circuit Breakers and Supplementary Protectors 1.1 Industrial Circuit Breakers QUICKLAG®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW . . . . . . . . . . . QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP . . . . . . . . . . . . . . . . . . . . Bolt-On Types BAB, QBHW, HBAX, HBAW. . . . . . . . . . . . . . . . .
PAGE 7
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents Miniature Circuit Breakers and Supplementary Protectors Description 1 Quick Reference 1 1 1 1 1 1 1 1 1 1 1 1 QUICKLAG 1 Quick Reference 1 Eaton’s QUICKLAG Industrial Circuit Breakers 1 Plug-In, Bolt-On, Cable-In/Cable-Out 1 Circuit Breaker Type 1 1 Circuit Breaker Type Code Continuous Ampere Rating at 40°C Interrupting Ratings rms Symmetrical Amperes Number of Poles Vac Vdc Federal Spec.
PAGE 8
1.1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Eaton’s QUICKLAG Industrial Circuit Breakers 1 Plug-In, Bolt-On, Cable-In/Cable-Out, continued Circuit Breaker Type Circuit Breaker Type Code Continuous Ampere Rating at 40°C 1 Interrupting Ratings rms Symmetrical Amperes Number of Poles Vac Vdc Federal Spec. W-C-375b Vac Ratings 120 120/240 Vdc Ratings 240 24–48 2 62.
PAGE 9
1.1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1 Eaton’s QUICKLAG Industrial Circuit Breakers 1 Plug-In, Bolt-On, Cable-In/Cable-Out, continued 1 Circuit Breaker Type 1 QCF C 15–20 1 QCF C 15–30 QCR C 10–60 1 QCR C QCR 1 1 Circuit Breaker Type Code Continuous Ampere Rating at 40°C Interrupting Ratings rms Symmetrical Amperes Number of Poles Vac Vdc Federal Spec. W-C-375b 1, 2 120/240 24, 48, 62.
PAGE 10
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Contents QUICKLAG Type HQP Single-Pole Description Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
1.
PAGE 12
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 13
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents QUICKLAG Type QPGF Single-Pole Ground Fault Circuit Breaker Description 1 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Wiring Diagram . . . . . . . . . . . . . . . . . . . . .
PAGE 14
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 15
1.
PAGE 16
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Contents QUICKLAG Type BAB Single-Pole Description Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . . . . . . . . . .
PAGE 17
1.
PAGE 18
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 19
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Bolt-On Arc Fault Circuit Interrupter QUICKLAG Types QBAF, QBCAF Contents Description 1 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . .
PAGE 20
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Product Selection 1 QBCAF and QBAF Type AFCIs Effective immediately, Eaton AFCIs are available for use in Sumter panels with a 22 kAIC rating. This higher rated breaker will allow us to win jobs where AFCIs are specified at higher than 10 kAIC. This breaker provides standard thermal- QBHCAF magnetic protection of branch circuits.
PAGE 21
1.
PAGE 22
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Contents QUICKLAG Type QBGF Single-Pole Ground Fault Circuit Breaker Description QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 23
1.
PAGE 24
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 25
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents QUICKLAG Type QC Single-Pole Description 1 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF . . . . . . . . . . . . . . . . . . . . . . .
PAGE 26
1.
PAGE 27
1.
PAGE 28
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 QUICKLAG Type QCD Miniature Circuit Breakers ● Flexible power feed QCD breakers are used primarily in HVAC and connection: industrial applications. wire size, position ● ● Single-, two- and Same breaker size for three-pole options entire rating range ● ● Modular construction Field mountable accessories: ● DIN mounted finger shroud proof, quick (symmetrical rail 35 x connect terminals 7.
PAGE 29
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents Cable-In/Cable-Out, 1/2-Inch Wide, Types QCR, QCF, QCRH, QCFH Description 1 1 1 1 1 Single-Pole Two-Pole QCR (Rear-Mounted Breakers) Single-Pole Two-Pole QCF (Front-Mounted Breakers) 1 1 1 1 1 1 Page Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 30
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 31
1.
PAGE 32
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 QCR and QCF Options and Accessories QCR and QCF Standard Box Terminals Factory-installed line and load side breaker terminal to accommodate14 AWG to 4 AWG wire.
PAGE 33
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents QUICKLAG Type QCGF Single-Pole Ground Fault Circuit Breaker Description 1 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF . . . . . . . .
PAGE 34
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 35
1.1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1 Wiring Diagram 1 Bell Alarm and Auxiliary Contact Schematic 1 Blue Ground Fault Breaker 1 1 1 1 1 Blue Wire NC Red Black Wire NO Red Wire Single-throw double-pole contacts are UL and CSA listed for 5A at 250 Vac. Bell Alarm (W1)—contacts change state when breaker trips. Auxiliary Switch (W2)—contacts change state when breaker is opened (or tripped) or closed. 14-inch (355.
PAGE 36
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Contents BABRP and BABRSP Breakers— Single- and Two-Pole Description Page Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF. . . . . . . . . . . .
PAGE 37
1.1 1 1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Product Selection QUICKLAG Type QCGF Single-Pole Ground Fault Circuit Breaker BABRP UL 489 and CSA 22.2 Interrupting Ratings BRRP UL 489 and CSA 22.
PAGE 38
1.
PAGE 39
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents GHBS and GHQRSP Description 1 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 40
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 41
1.1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1 Technical Data and Specifications 1 1 Solenoid Operating Data ● Power requirements: 24 Vac/dc (20.4V minimum– 30V maximum) ● Controlled signal: +AC/ DC 8 ms minimum with zero cross, 300 ms maximum ● AC: 1.
PAGE 42
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.1 Contents International Rated Description Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 43
1.
PAGE 44
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 45
1.1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Contents QUICKLAG Type P Switching Neutral Description Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUICKLAG Plug-On Types HQP, QPHW, QHPX, QHPW QUICKLAG Plug-On Ground Fault and Equipment Protectors, Types QPGF, QPHGF, QPGFEP, QPHGFEP Bolt-On Types BAB, QBHW, HBAX, HBAW . . . . . . . . Bolt-On Arc Fault Circuit Interrupter Types QBAF, QBCAF . . . . . . . . . . . . . . . . . . . . . .
PAGE 46
Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1.
PAGE 47
1.
PAGE 48
1.
PAGE 49
1.
PAGE 50
1.
PAGE 51
1.1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers 1 Factory Modifications and Installed Terminals 1 Factory Modifications 1 Type of Modification Breaker Type Catalog Suffix Shunt trip (requires one extra pole space on right side) 120, 208, 240 Vac Draws 2.6A at 120V, draws 11A at 24 Vdc QUICKLAG Types P, B and C S Shunt trip (requires one extra pole space on right side) 24, 48 Vac/dc Draws 2.
PAGE 52
1.
PAGE 53
1.1 1 1 1 1 1 1 1 Miniature Circuit Breakers and Supplementary Protectors Industrial Circuit Breakers Dimensions Approximate Dimensions in Inches (mm) Shipping Data Miniature Circuit Breaker Number of Poles Standard Carton Quantity Approximate Carton Weight Lbs (kg) Approximate Standard Carton QUICKLAG Types B, P, C–all 1 24 9.00 (4.1) 12.50 x 7.50 x 5.00 (317.5 x 190.5 x 127.0) QUICKLAG Types B, P, C–all 2 12 9.00 (4.1) 12.50 x 7.50 x 5.00 (317.5 x 190.5 x 127.
PAGE 54
Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers 1.2 Contents FAZ-NA Circuit Breakers Description Page FAZ-NA Circuit Breakers Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 55
1.2 1 1 1 FAZ-NA complies with the latest national and international standards. 1 1 1 1 ● ● UL 489 ● Standard for molded case circuit breakers (MCCB) for feeder and branch circuit protection ● Products meet the requirements of the National Electrical Code® (NEC®) ● CSA C22.2 No.
PAGE 56
1.2 Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers 1 1.45 FAZ-NA B Curve ● UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02) as branch circuit breakers ● Interrupting capacity: 10 kA UL/CSA; 15 kA IEC 60947-2 ● Current limiting device ● UL file number E235139 1.13 Product Selection 2.55 I : N 1 Type B: 3 x I : t > 0.1 s N 1 7200 Specified non-tripping current INT = 1.
PAGE 57
1.2 1 1 FAZ-NA C Curve ● UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02) as branch circuit breakers ● Interrupting capacity: 10 kA UL/CSA; 15 kA IEC 60947-2 ● Current limiting device ● UL file number E235139 1.45 UL 489 DIN Rail Miniature Circuit Breakers 1.13 1 Miniature Circuit Breakers and Supplementary Protectors 7200 Specified non-tripping current INT = 1.13 x IN for t > 1 h 3600 1200 300 120 60 30 1 t [sec] 10 1 5 2 1 1 0.5 0.2 1 2 0.1 1 0.05 1 0.02 0.005 0.002 0.
PAGE 58
1.2 Miniature Circuit Breakers and Supplementary Protectors 1 1.45 FAZ-NA D Curve ● UL approved (UL 489) and CSA Certified (CSA C22.2 No.5-02) as branch circuit breakers ● Interrupting capacity: 10 kA UL/CSA; 15 kA IEC 60947-2 ● Current limiting device ● UL file number E235139 1.13 UL 489 DIN Rail Miniature Circuit Breakers 7200 2.55 I : N Specified non-tripping current INT = 1.13 x IN for t > 1 h 3600 1200 Specified tripping current IT = 1.
PAGE 59
1.2 1 ● ● 1 ● 1 1 UL 489 DIN Rail Miniature Circuit Breakers FAZ-NA-DC C Curve 1 1 Miniature Circuit Breakers and Supplementary Protectors ● ● ● UL approved (UL 489) and CSA Certified (CSA C22.2 No.
PAGE 60
Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers 1.
PAGE 61
1.
PAGE 62
Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers 1.2 Technical Data and Specifications Trip Curve Chart Eaton FAZ-NA branch circuit breakers are available with “B,” “C” and “D” tripping characteristics. B-curve devices are suitable for applications where low levels of inrush current are expected. C-curve devices are suitable for applications where medium levels of inrush current are expected.
PAGE 63
1.2 1 1 Connection Diagrams UL 489 DIN Rail Miniature Circuit Breakers Miniature Circuit Breakers FAZ-NA Technical Data Description Single-Pole Rated voltage FAZ-NA UL/CSA 1 1 1 Two-Pole Specification Electrical Design according to 1 1 Miniature Circuit Breakers and Supplementary Protectors UL 489, CSA C22.2 No.5, IEC 60947-2 10 kAIC at 277/480V from 0.
PAGE 64
1.2 Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Power Loss at ln Characteristic B Characteristic C 1 Characteristic D Single-Pole Two-Pole Three-Pole Single-Pole Two-Pole Three-Pole Single-Pole Two-Pole Three-Pole In [A] P [W] P [W] P [W] P [W] P [W] P [W] P [W] P [W] P [W] 0.5 — — — 1.6 3.2 4.7 1.6 3.2 4.8 1.0 1.1 2.2 3.4 1.1 2.2 3.4 0.8 1.5 2.3 1.5 2.2 4.4 6.6 1.3 2.6 3.9 1.0 2.1 3.1 2.0 1.4 2.
PAGE 65
1.2 1 1 Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Let-Through Energy Characteristic B (1–32A), 277V Characteristic B (35–40A), 240V Characteristic C (0.5–32A), 277V Characteristic C (40A), 240V 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V4-T1-60 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 66
Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Characteristic D (0.5–32A), 277V 1.2 Characteristic D (40A), 240V 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 67
1.2 1 Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Influence of Ambient Temperature T on Load Carrying Capacity Device Market Current Rating In (A) at 40°C 15°C 20°C 25°C 30°C 40°C 50°C 55°C 60°C 1 0.5 0.6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.1 1.1 1.1 1.0 1.0 1.0 0.9 0.9 1 1.5 1.7 1.6 1.6 1.6 1.5 1.4 1.4 1.4 1 2.0 2.2 2.2 2.1 2.1 2.0 1.9 1.9 1.8 3.0 3.3 3.2 3.2 3.1 3.0 2.9 2.9 2.8 1 4.0 4.4 4.
PAGE 68
Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Z-NHK 1.
PAGE 69
1.
PAGE 70
1.
PAGE 71
1.2 1 1 Miniature Circuit Breakers and Supplementary Protectors UL 489 DIN Rail Miniature Circuit Breakers Dimensions Approximate Dimensions in Inches (mm) Lockout Attachment—Z-IS/SPE-1TE Miniature Circuit Breakers 1 Single-Pole Two-Pole Three-Pole 1 1 1 4.13 (105.0) 1 4.13 (105.0) 1 1 .70 .70 (17.7) (17.7) 2.09 (53.1) .70 (17.7) 1.39 (35.3) .70 (17.7) 1 4.13 (105.0) Accessories 1 Z-SV/UL-16/6 ZV-BS-UL Z-SV/UL-18...12 1 1 1 1 1 1 Z-EK/35/UL Z-SV/UL-16...
PAGE 72
Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1.3 Contents FAZ Circuit Breakers Description FAZ Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . . Standards and Certifications. . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications. . . . . .
PAGE 73
1.3 1 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Standards and Certifications FAZ complies with the latest national and international standards.
PAGE 74
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Product Selection 1.45 1 7200 Specified non-tripping current INT = 1.13 x IN for t > 1 h 3600 1200 600 Specified tripping current IT = 1.45 x IN for t < 1 h 300 2.55 I : N t = 1–60 s (IN < 32A) t = 1–120 s (IN > 32A) 1 Type B: 3 x I : t > 0.1 s N 1 Type B: 5 x I : t < 0.
PAGE 75
1.3 1 1 1 1 1 Suitable for applications where medium levels of inrush current are expected. Instantaneous trip is 5–10X rating of device (In). Applications include small transformers, lighting, pilot devices, control circuits and coils. Medium magnetic trip point. 1.
PAGE 76
1.3 Miniature Circuit Breakers and Supplementary Protectors Suitable for applications where high levels of inrush current are expected. Instantaneous trip is 10–20X rating of device (In). The high magnetic trip point prevents nuisance tripping in high inductive applications such as motors, transformers and power supplies. 1 1.45 7200 Specified non-tripping current INT = 1.13 x IN for t > 1 h 3600 1200 Specified tripping current IT = 1.45 x IN for t < 1 h 600 300 2.
PAGE 77
1.3 1 1 1 1 1 UL 1077 DIN Rail Supplementary Protectors 1.13 1.45 FAZ K curve (8–12X In current rating) ● Designed for motors, transformers and upstream electronics ● Response time of instantaneous trip: 8–12X In current rating ● UL recognized and CSA Certified as supplementary protectors ● For international and domestic use (conform to IEC 60947-2) ● UL file number 177451 7200 3600 120 60 30 Suitable for applications where medium levels of inrush current are expected.
PAGE 78
Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 7200 3600 Specified non-tripping current Int = 1.05 u In for t > 1 h Specified tripping current It = 1.30 u In for t < 1 h 1200 600 300 120 60 30 1 1 1 1 10 5 t (sec) Suitable for applications where high levels of inrush current are expected. Instantaneous trip is 13–17X rating of device (In).
PAGE 79
1.3 1 1 1 1 UL 1077 DIN Rail Supplementary Protectors FAZ Z curve (2–3X In current rating) ● Designed for protection of electronic devices ● Response time of instantaneous trip: 2–3X In current rating ● UL recognized and CSA Certified as supplementary protectors ● For international and domestic use (conform to IEC 60947-2) 1.05 1.30 1 Miniature Circuit Breakers and Supplementary Protectors 7200 3600 1200 600 300 Suitable for applications where low levels of inrush current are expected.
PAGE 80
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Accessories 1 FAZ Auxiliary Contacts and Voltage Trips Circuit Diagram Description Rated Operational Voltage Catalog Number FAZ-XHIN11 1 1 Standard Auxiliary Contacts 14 12 ■ ■ ■ ■ 1NO/1NC Installs on left side of FAZ or shunt trip Max.
PAGE 81
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1 Busbar System 1 Description Without Auxiliary Contacts 1 For connecting FAZ supplementary protectors without auxiliary contacts. May be fed from line or load side.
PAGE 82
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Incoming Terminal Pin Type Incoming Supply Terminals Description Catalog Number ■ Accommodates conductors BB-UL-TEP/35 Incoming Terminal Description ■ ■ ■ ■ ■ from 6–35 mm2/#10–2 AWG ■ 4–5.
PAGE 83
Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1 Technical Data and Specifications 1 Trip Curves Chart Eaton FAZ supplementary protectors are available with six different tripping characteristics, including Type B, C, D, K, S and Z. Definitions for each trip curve are contained on the ordering pages and can be used to determine the optimal characteristic for your application.
PAGE 84
Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1.3 FAZ Miniature Circuit Breakers Technical Data Description B Curve C Curve 1 D Curve 1 Electrical Approvals UR (UL 1077), CSA (CSA 22.2 No. 235), CE 1 Standards IEC/EN 60947-2 Short-circuit trip response 3–5 In 5–10 In 10–20 In 1 1–63A 0.5–63A 0.
PAGE 85
1.3 1 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors FAZ Miniature Circuit Breakers Technical Data, continued Description B Curve C Curve D Curve 1 Electrical 1 Approvals UR (UL 1077), CSA (CSA 22.2 No. 235), CE Standards IEC/EN 60947-2, E177451, 204453 1 Short-circuit trip response 8–12 In 13–17 In 2–3 In 1 Current range 0.5–63A 0.
PAGE 86
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Let-Through Energy I2t Let-Through Energy ID Characteristic B and C Characteristic B and C ∫i2dt 105 [A2s] 8 63 A 50 A 40 A 32 A 25 A 20 A 16 A 13 A 10 A 6 4 1 1 lD 104 9 [A] 8 63 A 50 A 40 A 32 A 25 A 16 A20 A 13 A 10 A 7 6 5 4 6A 4A 3A 2 1.5 6A 4A 104 3A 3 2A 1 1.5 4 1 103 2 1 1A 1.5 1 0.5 A 1 A 103 0.5 A 1 1 2A 6 1 1 2 8 1 5 6 1 4 1 8 1 3 2 0.5 1 1.
PAGE 87
1.3 1 1 1 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Let-Through Energy I2t Characteristic K lD [A] Characteristic S lD [A] 104 8 1 104 8 6 63 A 50 A 40 A 32 A 25 A 20 A 13 A 16 A 6 1 4 1 3 10 A 6A 4A 3A 4 2 2A 3 1 40 A 32 A 25 A 20 A 16 A 10 A 6A 4A 3A 2A 1.6 A 1 1.5 1A 1 2 1A 3 10 1 1.5 1 103 5 1 0.5 A 1 1 5 0.5 1 1 1 1 1 lD [A] 3 4 5 6 7 8 9 10 0.5 104 8 6 1 3 1 2 Characteristic Z 4 1 1.
PAGE 88
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Influence of the Ambient Temperature on the Thermal Tripping Behavior Corrected values of the rated current dependent on the ambient temperature 1 Ambient Temperature T In (A) –40°C –30°C –20°C –10°C 0°C 10°C 20°C 30°C 35°C 40°C 45°C 50°C 55°C 60°C 65°C 70°C 75°C 0.16 0.20 0.20 0.19 0.19 0.18 0.17 0.17 0.16 0.16 0.15 0.15 0.15 0.14 0.14 0.14 0.14 0.13 0.25 0.32 0.
PAGE 89
1.3 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1 Accessories Technical Data 1 Description FAZ-XHIN FAZ-XAM002 FAZ-XAA-C FAZ-XUA Contact function 1A + 1B 2 C/O — — — — Rated operational voltage Un 250 Vac — 1 115 Vac 230 Vac 400 Vac Voltage range — — 1 12–110 Vac 12–60 Vdc Voltage range — — 1 110–415 Vac 110–230 Vdc Closing threshold [x Un] — — 0.8 Tripping threshold [x Un] — — 0.
PAGE 90
Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors 1.3 Dimensions Approximate Dimensions in Inches (mm) 1 Miniature Circuit Breakers 1 1 FAZ 0.74 (9.4) 1 1 1.77 (45.0) 3.15 (80.0) 1 1 1.40 (35.4) 0.70 (17.8) 2.09 (53.1) 0.22 (5.5) 2.79 (70.8) 1 1.73 (44.0) 1 2.36 (60.0) 1 1 Auxiliary Contacts FAZ-XHI11 and FAZ-XH1NW1 FAZ-XAM002 1 1 3.15 (80.0) 3.15 (80.0) 1.77 (45.0) 1 1.77 (45.0) 1 1 0.35 (8.8) 0.22 (5.5) 1.73 (44.0) 0.35 (8.
PAGE 91
1.3 1 Miniature Circuit Breakers and Supplementary Protectors UL 1077 DIN Rail Supplementary Protectors Approximate Dimensions in Inches (mm) 1 Busbar and Accessory Weights and Dimensions 1 Unit Weight (kg) Length Width Height Catalog Number 0.29 39.72 (1009.0) 0.59 (15.0) 0.59 (15.0) BB-UL-18/1P-1M/57 0.64 39.02 (991.0) 0.87 (22.0) 1.46 (37.0) BB-UL-18/2P-2M/56 1 0.83 39.72 (1009.0) 0.87 (22.0) 1.46 (37.0) BB-UL-18/3P-3M/57 1 0.26 38.78 (985.0) 0.59 (15.0) 0.59 (15.
PAGE 92
Miniature Circuit Breakers and Supplementary Protectors UL 1053 DIN Rail RCCB 1.4 Contents UL 1053 DIN Rail RCCB Description UL 1053 DIN Rail RCCB 480/277 Vac Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . UL 1053 DIN Rail RCCB 208Y/120 Vac. . . . . . . . . . . . .
PAGE 93
1.
PAGE 94
1.4 Miniature Circuit Breakers and Supplementary Protectors UL 1053 DIN Rail RCCB Accessories 1 UL 1053 DIN Rail RCCB 480/277 Vac Contact Description Catalog Number Two-pole contact or auxiliary contact / trip indicating contact Z-NHK 1 Padlock Hasp Description Catalog Number Padlock hasp Z-IS/SPE-1TE 1 1 1 1 1 Note 1 Voltage of FAZ-NA circuit breaker is limited to 300V with this auxiliary contact installed.
PAGE 95
1.
PAGE 96
1.
PAGE 97
1.4 1 Miniature Circuit Breakers and Supplementary Protectors UL 1053 DIN Rail RCCB Accessories Technical Data Description Z-NHK 1 Electrical 1 Rated voltage 230V Frequency 50/60 Hz 1 Contact function 2CO Rated current 2A Rated thermal current Ith 2A 3A/250 Vac 1 Utilization category AC13 Rated operational current Ie Utilization category AC15 Rated operational current Ie 2A/250 Vac 1 Utilization category DC12 Rated operational current Ie 0.
PAGE 98
Miniature Circuit Breakers and Supplementary Protectors UL 1053 DIN Rail RCCB 1.4 Contents UL 1053 DIN Rail RCCB Description UL 1053 DIN Rail RCCB 480/277 Vac . . . . . . . . . . UL 1053 DIN Rail RCCB 208Y/120 Vac Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 99
1.
PAGE 100
1.4 Miniature Circuit Breakers and Supplementary Protectors UL 1053 DIN Rail RCCB Accessories 1 UL 1053 DIN Rail RCCB 208Y/120 Vac Contact Description Catalog Number Two-pole contact or auxiliary contact / trip indicating contact Z-NHK 1 Padlock Hasp Description Catalog Number Padlock hasp Z-IS/SPE-1TE 1 1 1 1 1 Note 1 Voltage of FAZ-NA circuit breaker is limited to 300V with this auxiliary contact installed.
PAGE 101
1.
PAGE 102
1.
PAGE 103
1.
PAGE 104
Molded Case Circuit Breakers Series G Circuit Breakers 2.1 Introduction Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Eaton Molded Case Circuit Breakers in Assemblies . . . . . . . . . . . . . . 2.2 2.3 2.4 2.5 2.6 2.7 V4-T2-2 V4-T2-2 V4-T2-3 Series G ® Globally Accepted Breakers Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 105
2.1 2 Molded Case Circuit Breakers Introduction Series G E-Frame and Series C F-Frame Molded Case Circuit Breakers Contents Description 2 Page Introduction Series G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Series C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Definite Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . PM3 Monitoring and Metering Module . . . . . . . . Specialty Breakers . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 106
2.1 Molded Case Circuit Breakers Introduction Eaton Molded Case Circuit Breakers in Assemblies 2 Applications Panelboards Ampere Frame Range Switchboards 2 Motor Control Centers 1A 2A 1A-LX 2A-LX 3A 3E 4 4B 4D 5P PRL-C PRL-i PRL-C/i Freedom IT.
PAGE 107
2.2 2 Molded Case Circuit Breakers Series G Series G, 15–2500 Amperes for UL, CSA and IEC Applications Contents Description 2 Page Series G Standards and Certifications . . . . . . . . . . . . . . . . Product Selection Overview . . . . . . . . . . . . . . . . Product Selection Guide . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . . Dimensions and Weights . . . . . . . . . . . . . . . . . . EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . .
PAGE 108
2.2 Molded Case Circuit Breakers Series G Operating Mechanisms Eaton circuit breakers have a toggle handle operating mechanism, which also serves as a switching position indicator. The indicator shows the positions of: ON, OFF and TRIPPED. The toggle handle snaps into the TRIPPED position if the breaker is tripped by one of its overcurrent, short circuit, shunt or undervoltage releases.
PAGE 109
2.2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Series G Product Selection Overview Electronic Trip Units (Digitrip RMS Trip Units)—Multi-Function Electronic Trip Units for All Applications True rms Sensing Digitrip RMS trip units use Eaton’s microprocessor-based intelligence to provide true rms sensing, permitting increased accuracy and reliable system protection.
PAGE 110
2.
PAGE 111
2.
PAGE 112
2.
PAGE 113
2.
PAGE 114
2.
PAGE 115
2.2 2 Molded Case Circuit Breakers Series G All Series G Frames, continued EG JG LG NG RG Yes Yes Yes Yes 2 Main switch characteristics according to IEC 60947-2 in combination with lockable rotary drives Yes 2 Rated short circuit breaking capacity according to IEC 60947-2 (at AC 50/60 Hz) For rated short circuit breaking capacity, see Page V4-T2-9.
PAGE 116
2.2 Molded Case Circuit Breakers Series G All Series G Frames, continued EG JG LG NG 2 RG 2 Releases Undervoltage releases (“r” releases) 2 Response voltage: Drop (breaker tripped) Us 35–70% 35–70% 35–70% 35–70% 35–70% Pickup (breaker may be switched on) Us 85–110% 85–110% 85–110% 85–110% 85–110% 2 50/60 Hz 12 Vac — — — 1.9 VA 2.9 VA 2 50/60 Hz 24 Vac 0.72 VA 3.9 VA 3.9 VA 2.4 VA 3.1 VA 50/60 Hz 48–60 Vac 1.15–1.78 VA 2.5–3.8 VA 2.5–3.8 VA 2.3–4.1 VA 3.4–6.
PAGE 117
2.2 2 2 Series G Dimensions and Weights Approximate Dimensions in Inches (mm) Series G—Frame EG, JG and LG 2 2 Molded Case Circuit Breakers EG Single-pole JG LG H W D H W D H W D 5.50 (139.7) 1.00 (25.4) 2.99 (76.0) — — — — — — Two-pole 5.50 (139.7) 2.00 (50.8) 2.99 (76.0) 7.00 (177.8) 4.13 (105.0) 3.57 (87.4) — — — Three-pole 5.50 (139.7) 3.00 (76.2) 2.99 (76.0) 7.00 (177.8) 4.13 (105.0) 3.57 (87.4) 10.13 (258.0) 5.48 (140.0) 4.09 (104.0) 2 Four-pole 5.
PAGE 118
Molded Case Circuit Breakers Series G EG-Frame (15–125 Amperes) 2.2 Contents Description EG-Frame (15–125 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . Dimensions and Weights . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . .
PAGE 119
2.2 2 2 2 Molded Case Circuit Breakers Series G Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 120
2.
PAGE 121
2.
PAGE 122
2.
PAGE 123
2.
PAGE 124
2.
PAGE 125
2.
PAGE 126
Molded Case Circuit Breakers Series G EG-Frame 2.
PAGE 127
2.
PAGE 128
Molded Case Circuit Breakers Series G Control Wire Terminal Kit Terminal End Covers (Gas Barrier) The terminal end cover is available for three-pole circuit breakers only. Two conductor opening sizes are available. Specify quantity (one per circuit breaker) when ordering.
PAGE 129
2.2 Molded Case Circuit Breakers Series G 2 Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 130
2.
PAGE 131
2.2 2 Molded Case Circuit Breakers Series G EG-Frame With Earth Leakage Module 10.26 (260.6) 2 4.75 (120.6) 2 0.55 (14.0) 2 1.49 1.00 (37.8) (25.4) 0.50 (12.7) 2 1.50 0.50 (38.1) (12.7) 2 2 4.78 (121.4) 8.59 (218.2) 2 0.90 (22.9) 0.35 (8.9) 2 2 0.09 (2.29) 2 EG-Frame With Current Limiter Module 2 2 0.56 (14.2) 2 2 2 3.01 (76.5) 2.75 (69.9) 0.78 (19.8) 2 2 2.00 (50.8) 0.70 (17.8) 2 2 3-Pole 2.98 (75.7) 1.00 (25.4) 2 1.00 (25.4) 3.00 (76.2) 9.66 (245.4) 4.17 (105.9) 3.
PAGE 132
Molded Case Circuit Breakers Series G JG-Frame (63–250 Amperes) 2.2 Contents Description EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . Dimensions and Weights . . . . . . . . . . . . . . . . . .
PAGE 133
2.2 2 2 2 Molded Case Circuit Breakers Series G Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 134
2.
PAGE 135
2.
PAGE 136
2.
PAGE 137
2.
PAGE 138
Molded Case Circuit Breakers Series G 2.
PAGE 139
2.2 Molded Case Circuit Breakers Series G 2 310+ Electronic Trip Units See 310+ adjustability specifications on Page V4-T2-44.
PAGE 140
Molded Case Circuit Breakers Series G 2.2 Complete Breaker with 310+ Electronic Trip Units See 310+ adjustability specifications on Page V4-T2-44.
PAGE 141
2.
PAGE 142
2.
PAGE 143
2.2 Molded Case Circuit Breakers Series G 2 JG 100% Rated 310+ Electronic Trip Unit Circuit Breaker See 310+ adjustability specifications on Page V4-T2-44.
PAGE 144
2.2 Molded Case Circuit Breakers Series G Accessories Selection Guide and Ordering Information 2 JG-Frame 2 2 2 2 2 2 T250FJ TA250FJ Endcap Kit Control Wire Terminal Kit Load and Line Terminals Maximum Breaker Amperes Terminal Body Material Wire Type AWG Wire Metric Wire Range/ Number Catalog Range mm2 of Conductors Number Rear Fed Terminals Multiwire Connectors Base Mounting Hardware Base mounting hardware is included with a circuit breaker or molded case switch. (Included with breaker.
PAGE 145
2.2 Molded Case Circuit Breakers Series G 2 Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 146
Molded Case Circuit Breakers Series G 2.
PAGE 147
2.
PAGE 148
Molded Case Circuit Breakers Series G 2.2 Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 JG-Frame 2 Number of Poles Width Height Depth 2, 3 4.13 (104.9) 7.00 (177.8) 3.57 (90.7) 4 5.34 (135.6) 7.00 (177.8) 3.57 (90.7) 2 2 JG-Frame 2 Front View Three-Pole Front Cover Cutout Side View 2 CL 0.63 (16.0) Breaker 3.06 (77.7) 2 3.95 (100.3) 0.19 (4.8) R 0.28 (7.1) 0.50 (12.7) 1.25 (31.8) 2.05 (52.1) CL Handle 4.00 (101.6) 2 7.00 (177.8) 2 1.06 (27.0) 4.
PAGE 149
2.2 2 4-Pole 5.50 (139.7) 3-Pole 4.13 (104.9) 0.69 2.06 1.38 (17.5) (52.3) (35.1) 2 2 2 Series G JG-Frame With Earth Leakage Module 2 2 Molded Case Circuit Breakers 3.92 (99.6) 5.50 (139.7) 1.25 (31.8) 3.57 (90.7) 3.92 (99.6) 5.50 (139.7) 2 0.63 (16.0) 1.88 (47.8) R 0.19 (4.8) 11.25 (285.8) 6.97 (177.0) 4.93 (125.2) 0.28 (7.1) 7.00 (177.8) 2 2.05 (52.1) 11.25 (285.8) 1.06 (26.9) 0.50 (139.7) 2 2 RESET 2 TEST 3.37 (85.6) 4.25 (108.0) 2 2 3.31 (84.1) 2 3.69 (93.7) 3.57 (90.
PAGE 150
Molded Case Circuit Breakers Series G LG-Frame (250–630 Amperes) 2.2 Contents Description EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . .
PAGE 151
2.2 2 2 2 Molded Case Circuit Breakers Series G Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 152
Molded Case Circuit Breakers Series G 2.
PAGE 153
2.
PAGE 154
Molded Case Circuit Breakers Series G 2.
PAGE 155
2.2 2 Molded Case Circuit Breakers Series G Digitrip 310+ Electronic Trip Units See 310+ adjustability specifications on Page V4-T2-62.
PAGE 156
Molded Case Circuit Breakers Series G 2.2 IC Rating at 415/480 V Complete LG Breakers with Electronic Trip Unit (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) 1 See 310+ adjustability specifications on Page V4-T2-62.
PAGE 157
2.2 2 2 2 2 2 Molded Case Circuit Breakers Series G IC Rating at 415/480 V Complete LG Breakers with Electronic Trip Unit (Includes Frame, Trip Unit, Standard Terminals and Mounting Hardware) 1 See 310+ adjustability specifications on Page V4-T2-62.
PAGE 158
Molded Case Circuit Breakers Series G 2.
PAGE 159
2.2 Molded Case Circuit Breakers Series G 2 LG 100% Rated Electronic Breaker Per UL 489 See 310+ adjustability specifications on Page V4-T2-62.
PAGE 160
Molded Case Circuit Breakers Series G 2.2 LG Electronic Breaker with Arcflash Reduction Maintenance System See 310+ adjustability specifications on Page V4-T2-62. Series G LG circuit breakers are available with the Arcflash Reduction Maintenance System™ integrated into the electronic trip units helping to improve safety by providing a LG with Arcflash Reduction Maintenance System simple and reliable method to reduce fault clearing time.
PAGE 161
2.
PAGE 162
Molded Case Circuit Breakers Series G 2.2 Terminals and Terminal Cover for the LG Breaker—Includes LTS3K (Three-Pole) or LTS4K (Four-Pole) Terminal Covers 2 Note: Extended terminal covers add 2.13 inches (54.0 mm) to breaker length. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 163
2.2 2 2 2 2 2 Molded Case Circuit Breakers Series G Accessories Base Mounting Hardware Base mounting hardware is included with a circuit breaker or molded case switch. (Included with breaker.) If required separately, order 66A4560G03. Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 164
Molded Case Circuit Breakers Series G 2.
PAGE 165
2.
PAGE 166
Molded Case Circuit Breakers Series G 2.2 Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 LG-Frame Number of Poles Width Height Depth 2, 3 5.48 (139.2) 10.13 (257.3) 4.09 (103.9) 4 7.22 (183.4) 10.13 (257.3) 4.09 (103.9) 2 2 2 LG-Frame Note: TA63IL, T63IL, T632L, TA632L terminals add 1.19 inches (30.2 mm) to line or load side of LG. LTS3K or LTS4K terminal covers add 2.13 inches (54.1 mm) to line or load side of LG. 2.43 (61.7) R 0.25 (6.4) CL 2 2 4.06 (103.
PAGE 167
2.2 2 Molded Case Circuit Breakers Series G LG-Frame With Earth Leakage Module 4.31 (109.5) 5.16 (131.1) 3.44 (87.4) 1.72 (43.7) 2 2 2 2 4.06 (103.1) 3.98 (101.1) 0.86 (21.8) 5.58 (141.7) 5.58 (141.7) 4.73 (120.1) 2 3.44 (87.4) 1.72 (43.7) 4.73 (120.1) 2 2 8.44 (214.4) 8.44 (214.4) 10.13 (257.3) 2 2 2 15.38 (390.7) 13.69 (347.7) 13.68 (347.5) 15.38 (390.7) 2 2 3-Pole 5.48 (139.2) 2 4-Pole 7.22 (183.4) 2 2 4-Pole 2.75 (69.9) 3-Pole 2.74 (69.6) 3.97 (100.8) 4.30 (109.2) 4.55 (115.
PAGE 168
Molded Case Circuit Breakers Series G NG-Frame (1200 Ampere) 2.2 Contents Description EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Product Selection Guide and Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . .
PAGE 169
2.2 2 2 2 Molded Case Circuit Breakers Series G Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 170
2.2 Molded Case Circuit Breakers Series G Product Selection Guide and Ordering Information 2 Type NGS Standard Interrupting Capacity—Ue Max. 690 Vac, 50 kA lcu at 480 Vac or 415 Vac See 310+ adjustability specifications on Page V4-T2-72.
PAGE 171
2.2 2 2 2 2 2 Series G Type NGH High Interrupting Capacity—Ue Max. 690 Vac, 65 kA lcu at 480 Vac or 415 Vac See 310+ adjustability specifications on Page V4-T2-72.
PAGE 172
2.2 Molded Case Circuit Breakers Series G Accessories Selection Guide and Ordering Information 2 Line and Load Terminals N-Frame circuit breakers do not include terminals as standard. When copper or Cu/Al terminals are required, order by catalog number.
PAGE 173
2.2 Molded Case Circuit Breakers Series G 2 Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker. 2 2 2 2 NG-Frame Accessories Reference Page Description Three-Pole Left Four-Pole Center Right Left Center Right Neu.
PAGE 174
Molded Case Circuit Breakers Series G 2.
PAGE 175
2.
PAGE 176
Molded Case Circuit Breakers Series G 2.2 Dimensions and Weights Approximate Dimensions in Inches (mm) 2 NG-Frame 2 Number of Poles Width Height Depth 3 8.25 (209.6) 16.00 (406.4) 5.50 (139.7) 4 11.13 (282.6) 16.00 (406.4) 5.50 (139.7) 2 2 2 NG-Frame Front View Three-Pole Front Cover Cutout 2 Side View 3.44 (87.4) 2 BREAKER 2 9.25 (235.0) R .25 (6.4) 2 1.91 (48.5) 16.00 (406.4) 2 3.68 1.50 (93.5) (38.1) 2 2 3.19 (81.0) 6.38 (162.1) 8.25 (209.6) 2 5.50 (139.
PAGE 177
2.2 2 Molded Case Circuit Breakers Series G RG-Frame (800–2500 Amperes) Contents Description 2 EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) Catalog Number Selection. . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . Accessories .
PAGE 178
Molded Case Circuit Breakers Series G 2.2 Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 179
2.2 Molded Case Circuit Breakers Series G 2 Product Selection 2 70 kA at 415 Vac and 65 kA at 480 Vac 2 2 Type RGH with Digitrip 310+ High Interrupting Capacity—Ue Maximum 690 Vac, 70 kA Icu at 415 Vac See 310+ adjustability specifications on Page V4-T2-83.
PAGE 180
2.2 Molded Case Circuit Breakers Series G 100 kA at Both 415 Vac and 480 Vac 2 Type RGC with Digitrip 310+ Very High Interrupting Capacity—Ue Maximum 690 Vac, 100 kA Icu at 415 Vac See 310+ adjustability specifications on Page V4-T2-83.
PAGE 181
2.
PAGE 182
2.
PAGE 183
2.2 Molded Case Circuit Breakers Series G 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals R-Frame circuit breakers use Cu/Al terminals as standard and copper only terminals as an option. Specify if factory installation is required. Must have terminals for 100% rated and or freeze testing requirements. 2 2 2 2 2 Base Mounting Hardware Supplied by customer. Handle Extension Included with breaker. Additional handle extensions are available.
PAGE 184
2.2 Molded Case Circuit Breakers Series G Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 185
2.
PAGE 186
Molded Case Circuit Breakers Series G 2.
PAGE 187
2.2 2 2 Molded Case Circuit Breakers Series G Dimensions and Weights Approximate Dimensions in Inches (mm) RG-Frame 2 Number of Poles Width Height Depth 2 3 15.50 (393.7) 16.00 (406.4) 9.75 (247.7) 4 20.00 (508.0) 16.00 (406.4) 9.75 (247.7) 2 2 2 2 2 2 Front View 3-Pole Front Cover Cutout Side View CL Breaker 14.50 (368.3) 2.25 (57.2) 7.25 (184.2) 0.16 R (4.1) 8.25 (209.6) 7.75 (196.9) 5.10 (129.5) CL Handle 9.70 (246.4) .44 R (11.2) 16.00 (406.
PAGE 188
Molded Case Circuit Breakers Series G Motor Circuit 480 Vac, Protectors 2.2 Contents Description EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes). . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) Product Selection Guide and Ordering Information. . . . . . . . . . . . . . . . . .
PAGE 189
2.2 Molded Case Circuit Breakers Series G 2 Product Selection Guide and Ordering Information 2 EG-Frame—480 Vac, 600Y/347 Vac Maximum 1 2 2 Continuous Amperes MCP Trip Setting 3 MCP Catalog Number HMCPE003A0C A 0.69 –0.91 9 2 B 1.1–1.3 15 C 1.6–1.7 21 2 D 2.0–2.2 27 E 2.3–2.5 30 F 2.6– 2.8 33 A 1.5–2.0 21 B 2.6–3.1 35 2 2 3 Cam Setting Motor Full Load Current Amperes 2 7 2 C 3.7–3.9 49 D 4.8–5.2 63 2 E 5.3–5.7 70 F 5.8–6.1 77 A 3.4–4.5 45 2 B 5.
PAGE 190
Molded Case Circuit Breakers Series G 2.2 EG-Frame—480 Vac, 600Y/347 Vac Maximum, continued 1 Continuous Amperes 50 70 100 100 Cam Setting Motor Full Load Current Amperes 2 2 MCP Trip Setting 3 MCP Catalog Number 2 HMCPE050K2C 2 A 11.5–15.2 150 B 19.2–22.9 250 C 26.9–30.6 350 D 34.6–38.3 450 E 38.4–42.1 500 F 42.2–43.5 550 A 16.1–30.6 210 B 26.9–32.2 350 C 37.6–42.9 490 D 48.4–53.7 630 E 53.8–59.1 700 F 59.2–60.9 770 A 23.0–30.6 300 B 38.4–46.
PAGE 191
2.2 Molded Case Circuit Breakers Series G 2 LG-Frame—600 Vac Maximum, 250 Vdc Maximum 1 2 Continuous Amperes MCP Trip Range (Amperes) MCP Catalog Number 2 600 1250–2500 HMCPL600L6G 1500–3000 HMCPL600N6G 2 1750–3500 HMCPL600R6G 2000–4000 HMCPL600X6G 2 2250–4500 HMCPL600Y6G 2500–5000 HMCPL600P6G 3000–6000 HMCPL600M6G 2 2 Notes 1 UL listed for use with Eaton Motor Starters. 2 800 and 1200 ampere, 600 Vac maximum motor circuit protectors are available as Series C HMCP product.
PAGE 192
Molded Case Circuit Breakers Series G 2.2 Contents Series G Motor Protector Circuit Breakers (MPCB) Description Page EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes). . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes). . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . .
PAGE 193
2.
PAGE 194
Molded Case Circuit Breakers Series G 2.
PAGE 195
2.2 2 Molded Case Circuit Breakers Series G Contents 30 mA Ground Fault (Earth Leakage) Modules Description 2 EG-Frame (15–125 Amperes). . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . .
PAGE 196
2.
PAGE 197
2.2 2 2 2 2 Molded Case Circuit Breakers Series G Dimensions Approximate Dimensions in Inches (mm) Assembled Breaker and Earth Leakage Module Frame Height Width Depth Three-Pole EG 10.25 (260.3) 3.00 (76.2) 2.98 (75.8) 2 JG 11.25 (285.8) 4.13 (104.9) 3.57 (90.7) LG 15.38 (390.7) 5.48 (139.2) 4.06 (103.1) 2 Four-Pole EG 10.25 (260.3) 4.00 (101.6) 2.98 (75.8) JG 11.25 (285.8) 5.50 (139.7) 3.57 (90.7) LG 15.38 (390.7) 7.23 (183.6) 4.06 (103.
PAGE 198
2.2 Molded Case Circuit Breakers Series G JG-Frame With Earth Leakage Module 2 4-Pole 5.50 (139.7) 3-Pole 4.13 (104.9) 0.69 2.06 1.38 (17.5) (52.3) (35.1) 3.92 (99.6) 2 5.50 (139.7) 1.25 (31.8) 3.57 (90.7) 3.92 (99.6) 5.50 (139.7) 1.88 (47.8) 2 6.97 (177.0) 2 4.93 (125.2) 0.28 (7.1) 11.25 (285.8) 2 0.63 (16.0) R 0.19 (4.8) 7.00 (177.8) 2 2.05 (52.1) 2 11.25 (285.8) 2 1.06 (26.9) 0.50 (139.7) 2 TEST 2 3.37 (85.6) 4.25 (108.0) RESET 2 2 2.05 (52.1) 4.09 (103.9) 3.57 3.69 (90.
PAGE 199
2.2 2 Molded Case Circuit Breakers Series G Contents Current Limiting Circuit Breaker Modules Description 2 Page EG-Frame (15–125 Amperes). . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . .
PAGE 200
2.
PAGE 201
2.2 2 2 2 2 2 Molded Case Circuit Breakers Series G Dimensions and Weights Approximate Dimensions in Inches (mm) Assembled Breaker and Current Limiting Module Frame Height Width Depth Weight in lbs (kg) EG 9.66 (245.7) 3.00 (76.2) 2.98 (75.8) 2.91 (1.32) HMCP 9.66 (245.7) 3.00 (76.2) 2.98 (75.8) 4.18 (1.90) EG-Frame With Current Limiter Module 2 2 0.56 (14.2) 2 2 2 2 2 1.00 (25.4) 3.00 (76.2) 9.66 (245.4) 4.17 (105.9) 3.61 (91.7) 0.50 1.00 (12.7) (25.4) 1.00 (25.4) 2 3.20 (81.
PAGE 202
2.
PAGE 203
2.2 2 2 2 2 2 Molded Case Circuit Breakers Series G Dimensions and Weights Approximate Dimensions in Inches (mm) Assembled Breaker and Current Limiting Module Frame Height Width Depth Weight in lbs (kg) JG + limiter 13.06 (331.7) 4.13 (104.9) 3.44 (87.4) 9.87 (4.48) HMCP 13.06 (331.7) 4.13 (104.9) 3.44 (87.4) 9.87 (4.48) JG-Frame With Current Limiter Module 2 2 2 4.13 (104.9) 4.12 (104.6) 2 2 2 2 13.06 (331.7) 2 2 4.41 (112.0) 2 2 3.34 (84.
PAGE 204
Molded Case Circuit Breakers Series G 2.2 Contents High Instantaneous Circuit Breaker for Selective Coordination Description Page EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes). . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes). . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . .
PAGE 205
2.2 Molded Case Circuit Breakers Series G Product Selection 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Proven Technology and Performance The LHH is based on the Series G L-Frame circuit breaker, sharing the same small footprint and field-fit accessories as the L-Frame breaker. The NHH is based on the Series G N-Frame circuit breaker and shares the same footprint and accessories as the N-Frame breaker. NHH accessories must be factory installed.
PAGE 206
Molded Case Circuit Breakers Series G Technical Data and Specifications ● ● ● ● ● ● ● ● ● ● ● 2.
PAGE 207
2.2 Molded Case Circuit Breakers Series G Contents 2 Description 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page V4-T2-15 V4-T2-29 V4-T2-47 V4-T2-65 V4-T2-74 V4-T2-85 V4-T2-89 V4-T2-92 V4-T2-96 EG-Frame (15–125 Amperes). . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . .
PAGE 208
Molded Case Circuit Breakers Series G 2.2 Standards and Certifications Moisture-Fungus Treatment All Eaton circuit breaker cases are molded from glasspolyester, which does not support the growth of fungus. Any parts that are susceptible to the growth of fungus will require special treatment. Order by description. ● Add suffix J01 to breaker catalog number Freeze-Tested Circuit Breakers The circuit breakers may be ordered with freeze testing.
PAGE 209
2.2 Molded Case Circuit Breakers Series G 2 Internal Accessories 2 Alarm Lockout The alarm switches operate when the circuit breaker is tripped by a short circuit or overcurrent, but also when it is tripped by a shunt trip or undervoltage release. 2 2 2 2 2 2 Auxiliary Switches Auxiliary switches are used for signaling and control purposes. The various functions of the auxiliary switches (changeover) are shown on Page V4-T2-108.
PAGE 210
2.
PAGE 211
2.2 Molded Case Circuit Breakers Series G 2 Accessory Configurations for EG–RG Circuit Breakers 2 Internal Accessory Configurations 2 2 2 2 ¬ 2 2 2 ¬ ¨ ¨ ¨ ¨ ¨ ¨ 2 ¡ ¡ ¡ ¡ 2 2 2 2 ¨ ≠ ¬ = For N and R-Frame Circuit Breakers Only 2 2 2 Contact Making by the Auxiliary and Alarm Switches as a Function of the Switching Position of the Circuit Breaker 2 2 2 2 2 2 2 2 2 2 2 2 2 V4-T2-108 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 212
Molded Case Circuit Breakers Series G 2.
PAGE 213
2.
PAGE 214
Molded Case Circuit Breakers Series G 2.2 Technical Data and Specifications 2 Note: Gold-plated contacts are well suited for switching low voltages and currents. Lead wires on accessories containing goldplated contacts are marked with a yellow stripe. 2 2 2 Series G Gold Contact Accessory Switch Electrical Ratings Max. Voltage (Ue) Frequency Max. Current (ln) Dielectric Withstand Voltage (Ul) 125 V 50/60 Hz 0.1 A 2200 V 30 V DC 0.
PAGE 215
2.2 2 Molded Case Circuit Breakers Series G Contents Series G Motor Operators Description 2 EG-Frame (15–125 Amperes). . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . . Motor Protector Circuit Breakers (MPCB) . . . . . . . .
PAGE 216
Molded Case Circuit Breakers Series G Features, Benefits and Functions The motor operator provides special features for ease of customer use and status indication. ● ● ● The motor operator allows the circuit breaker to be opened, closed or reset remotely The motor operator contains a motor connected to a cam drive mechanism.
PAGE 217
2.2 2 Molded Case Circuit Breakers Series G Contents LG Breaker with Plug-In Block Description 2 EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . . Motor Protector Circuit Breakers (MPCB).
PAGE 218
Molded Case Circuit Breakers Series G 2.2 Contents Drawout Cassettes Description Page EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . . JG-Frame (63–250 Amperes) . . . . . . . . . . . . . . . . . LG-Frame (250–630 Amperes) . . . . . . . . . . . . . . . . . NG-Frame (320–1200 Amperes) . . . . . . . . . . . . . . . RG-Frame (800–2500 Amperes) . . . . . . . . . . . . . . . Motor Circuit Protectors (MCP) . . . . . . . . . . . . . . . . Motor Protector Circuit Breakers (MPCB) . . . . . . . .
PAGE 219
2.3 2 Molded Case Circuit Breakers Series C Contents Molded Case Circuit Breaker Product Family Description 2 2 2 2 2 2 2 2 Learn Online 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Page Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes). . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 220
Molded Case Circuit Breakers Series C 2.3 Standards and Certifications Certified Test Reports Eaton breakers can be ordered with certified test reports at the time of order entry. Test report documents the thermal and magnetic or electronic tripping characteristics of the individual breaker. Breaker and test report must be ordered together. Add suffix 12 to breaker catalog number and enter separate line item on order for certified test report.
PAGE 221
2.3 2 2 2 Molded Case Circuit Breakers Series C Quick Reference Industrial Circuit Breakers G-Frame UL Listed Interrupting Ratings (rms Symmetrical Amperes) Circuit Breaker Type Continuous Ampere Rating at 40 °C No. of Poles AC GHB 15–100 1 2 GHB 15–100 2, 3 2 GHB 15–100 GHB 15–100 2 HGHB 15–30 1 277 125 N.I.T.U. 12c, 13a, 13b 65 — — 25 — — GHBS 15–30 1, 2 480Y/277 — — — 65 65 — 14 — — 2 GBHS 15–20 1, 2 600Y/347 — N.I.T.U.
PAGE 222
2.3 Molded Case Circuit Breakers Series C F-Frame 2 UL Listed Interrupting Ratings (rms Symmetrical Amperes) Circuit Breaker Type Continuous Ampere Rating at 40 °C No. of Poles AC DC EDB 100–225 2, 3 240 EDS 100–225 2, 3 240 ED 15–225 2, 3 240 EDH 100–225 2, 3 240 125 EDC 100–225 2, 3 240 125 EHD 15–100 1 277 125 N.I.T.U. 13a — — — 14 — — EHD 15–100 2, 3 480 250 N.I.T.U. 13b — — 18 — 14 — FDB 15–150 2, 3 600 250 N.I.T.U.
PAGE 223
2.3 Molded Case Circuit Breakers Series C 2 J-Frame 2 Circuit Breaker Type Continuous Ampere Rating at 40 °C 2 JDB 70–250 2, 3 2 JD 70–250 2, 3, 4 HJD 70–250 2, 3, 4 2 JDC 3 70–250 2, 3, 4 2 2 UL Listed Interrupting Ratings (rms Symmetrical Amperes) Volts No. of Poles Federal Specification W-C-375b DC Type of Trip 1 600 250 N.I.T.U. 22a — 600 250 I.T.U. 22a — 600 250 I.T.U. 22a — 600 250 I.T.U.
PAGE 224
Molded Case Circuit Breakers Series C Molded Case Circuit Breaker Product Family 2.3 Contents Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Technical Data and Specifications. . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . .
PAGE 225
2.3 2 2 2 Molded Case Circuit Breakers Series C Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 226
Molded Case Circuit Breakers Series C 2.3 Contents Typical G-Frame Circuit Breaker Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 227
2.
PAGE 228
Molded Case Circuit Breakers Series C 2.3 Dimensions 2 Approximate Dimensions in Inches (mm) 2 GD-Frame, Three-Pole Front View 2 Side View 2 2 2 2 2 4.88 (123.8) 2 Off 2 2 2 3.00 (76.2) 2 2.63 (66.7) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 229
2.3 2 Molded Case Circuit Breakers Series C Contents Typical GHB Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes). . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes). . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . . K-Frame (70–400 Amperes). . . . . .
PAGE 230
Molded Case Circuit Breakers Series C 2.
PAGE 231
2.3 2 2 2 Molded Case Circuit Breakers Series C Dimensions Approximate Dimensions in Inches (mm) GDB-Frame, Three-Pole Front View 2 Side View 2 2 2 2 4.00 (101.6) 2 2 2 2 3.00 (76.2) Max. 2 2.63 (66.7) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 V4-T2-128 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 232
Molded Case Circuit Breakers Series C 2.3 Contents Single-Phase (requires two poles) Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 233
2.3 2 2 2 Molded Case Circuit Breakers Series C Dimensions Approximate Dimensions in Inches (mm) GHB-Frame, Three-Pole Front View 2 Side View 2 2 2 2 4.00 (101.6) 2 2 2 2 3.00 (76.2) 2.63 (66.7) 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 V4-T2-130 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 234
Molded Case Circuit Breakers Series C 2.3 Contents Typical GHC Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . . K-Frame (70–400 Amperes) . . . . . . .
PAGE 235
2.
PAGE 236
Molded Case Circuit Breakers Series C 2.3 Contents Single-Phase (requires two-pole spaces) Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 237
2.3 2 Molded Case Circuit Breakers Series C Contents Special Purpose Circuit Breakers Description 2 2 2 2 2 2 2 2 2 2 Special Purpose GHC Circuit Breakers (15–100 Amperes) 2 Product Description 2 2 2 Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 238
Molded Case Circuit Breakers Series C Typical F-Frame Breaker F-Frame Breaker with Electronic Trip Unit 2.3 Contents Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) Catalog Number Selection . . . . . . . . . . . . . . . . . Product Selection . . . . . .
PAGE 239
2.3 2 2 Molded Case Circuit Breakers Series C Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 240
Molded Case Circuit Breakers Series C 2.
PAGE 241
2.
PAGE 242
Molded Case Circuit Breakers Series C 2.
PAGE 243
2.
PAGE 244
Molded Case Circuit Breakers Series C 2.
PAGE 245
2.
PAGE 246
Molded Case Circuit Breakers Series C 2.
PAGE 247
2.3 2 Molded Case Circuit Breakers Series C Types FDE, HFDE and FDCE 310+ Electronic Circuit Breakers with Non-Interchangeable Trip Units See 310+ adjustability specifications on Page V4-T2-150.
PAGE 248
Molded Case Circuit Breakers Series C Molded Case Switches Eaton’s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker 2.3 2 components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489.
PAGE 249
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals Line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. Except as noted, terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B. Unless otherwise specified, F-Frame circuit breakers are factory equipped with load terminals only.
PAGE 250
2.3 Molded Case Circuit Breakers Series C Line and Load Terminals 2 2 Collar 2 Collar Nut Screw 2 Clip Conductor 2 Washer Conductor Conductor Screw Wire Clamp 2 Extrusion 3T20FB 3T100FB, 3T150FB 3TA225FD Assemble wire clamp to bottom of conductor as shown. Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: Collar must surround conductor. Insert collar enclosing conductor and center on extrusion on collar.
PAGE 251
2.3 2 2 2 2 Molded Case Circuit Breakers Series C Accessories Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 252
Molded Case Circuit Breakers Series C 2.
PAGE 253
2.
PAGE 254
Molded Case Circuit Breakers Series C 2.3 Dimensions and Weights Approximate Dimensions in Inches (mm) 2 FD Frame 2 Number of Poles Width Height Depth 1 1.38 (35.1) 6.00 (152.4) 3.38 (86.0) 2 2.75 (70.0) 6.00 (152.4) 3.38 (86.0) 3 4.13 (105.0) 6.00 (152.4) 3.38 (86.0) 4 5.50 (139.7) 6.00 (152.4) 3.38 (86.0) 2 2 2 2 FD Frame, Three-Pole 2 Side View Front View 2 2 2 On Off 2 2 6.00 (152.4) 2 2 2 2 3.38 (85.7) 4.13 (104.
PAGE 255
2.3 2 Molded Case Circuit Breakers Series C Typical J-Frame Breaker Contents Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) Catalog Number Selection. . . . . . . . . . . . . . . .
PAGE 256
Molded Case Circuit Breakers Series C 2.3 Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 257
2.
PAGE 258
2.
PAGE 259
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals Eaton’s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA Standard C22.2 No. 65, or Electrical Bulletin 1165.
PAGE 260
2.3 Molded Case Circuit Breakers Series C Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 261
2.
PAGE 262
Molded Case Circuit Breakers Series C 2.3 Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 JD Frame Number of Poles Width Height Depth 2, 3 4.13 (105.0) 10.00 (254.0) 4.06 (104.1) 4 5.50 (139.7) 10.00 (254.0) 4.06 (104.1) 2 2 2 JD-Frame, Three-Pole 2 Front View Front View Cutout 0.34 R (8.7 R) CL Handle 1.56 (39.7) 3.94 (100.0) 0.72 (18.2) 0.50 (12.7) Diameter 3 Megger Holes if Required 4.13 (104.8) 2 2 0.78 (19.8) 2 2.92 (74.2) CL Breaker 0.19 R (4.
PAGE 263
2.3 2 Molded Case Circuit Breakers Series C Typical K-Frame Circuit Breaker Contents Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 264
Molded Case Circuit Breakers Series C 2.3 Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 265
2.
PAGE 266
Molded Case Circuit Breakers Series C 2.
PAGE 267
2.
PAGE 268
Molded Case Circuit Breakers Series C 2.3 Type KDB with Digitrip 310+ Non-Interchangeable Trip Unit Suitable for Reverse Feed See 310+ adjustability specifications on Page V4-T2-181.
PAGE 269
2.3 2 Molded Case Circuit Breakers Series C Types DK and KDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units Suitable for reverse feed application.
PAGE 270
Molded Case Circuit Breakers Series C Molded Case Switches Eaton’s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker 2.3 2 components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489.
PAGE 271
2.3 2 Molded Case Circuit Breakers Series C Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Rating Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 272
Molded Case Circuit Breakers Series C 2.
PAGE 273
2.
PAGE 274
Molded Case Circuit Breakers Series C 2.3 Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Rating Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 275
2.
PAGE 276
2.
PAGE 277
2.3 2 Molded Case Circuit Breakers Series C 100% Rated Digitrip OPTIM 550 Electronic Circuit Breakers with Interchangeable Rating Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 278
2.
PAGE 279
2.3 2 Molded Case Circuit Breakers Series C 100% Rated Digitrip OPTIM 1050 Electronic Circuit Breakers with Interchangeable Rating Plug Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 280
2.
PAGE 281
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Guide 2 Line and Load Terminals Eaton’s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards 2 2 2 UL 486A and UL 486B and CSA Standard C22.2 No. 65, or Electrical Bulletin 1165.
PAGE 282
2.3 Molded Case Circuit Breakers Series C Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 283
2.
PAGE 284
2.
PAGE 285
2.3 2 Molded Case Circuit Breakers Series C Specifications Trip Unit Type Digitrip OPTIM 550 Digitrip OPTIM 1050 2 rms sensing Yes Yes 2 Frame K K Ampere range 125–400 A 125–400 A 2 Interrupting rating at 480 volts 35, 65, 100 (kA) 35, 65, 100 (kA) 2 Ordering options LSI, LSI(A), LSIG LSI(A), LSIG Yes Yes 2 Fixed rated plug (In) Overtemperature trip Yes Yes Breaker Type Protection Long Delay Protection (L) 2 Adjustable rating plug (In) No No Long delay pickup 0.4–1.
PAGE 286
Molded Case Circuit Breakers Series C 2.3 Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 KD Frame Number of Poles Width Height Depth 2, 3 5.50 (149.7) 10.13 (257.3) 4.10 (104.1) 4 7.22 (183.4) 10.13 (257.3) 4.10 (104.1) 2 2 2 KD-Frame, Two- and Three-Pole 2 4.31 (109.6) 5.49 (139.4) Front Cover Cutout 2 Side View Front View 2 0.34 R (8.7 R) 2 3.75 (95.3) 2 CL Handle 0.83 (21.0) 0.19 R (4.8 R) 2 1.64 (41.7) ON 1.25 (31.8) 2 10.13 (257.2) 1.31 (33.
PAGE 287
2.3 2 Molded Case Circuit Breakers Series C Contents Typical L-Frame Circuit Breaker Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 288
Molded Case Circuit Breakers Series C 2.3 Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 289
2.
PAGE 290
2.
PAGE 291
2.3 Molded Case Circuit Breakers Series C 2 Types LD, HLD and LDC Electronic Circuit Breakers with Interchangeable Trip Units Order as individual components: breaker frame, trip unit and terminals. See 310+ adjustability specifications on Page V4-T2-181.
PAGE 292
2.
PAGE 293
2.3 Molded Case Circuit Breakers Series C 2 Digitrip OPTIM Electronic Circuit Breaker with Interchangeable Rating Plug Order as individual components: Breaker Frame (which includes Trip Unit), Rating Plug, Terminals.
PAGE 294
Molded Case Circuit Breakers Series C 2.
PAGE 295
2.
PAGE 296
Molded Case Circuit Breakers Series C 2.3 Digitrip OPTIM Electronic Circuit Breaker with Interchangeable Rating Plug Order as individual components: Breaker Frame (which includes Trip Unit), Rating Plug, Terminals.
PAGE 297
2.
PAGE 298
2.
PAGE 299
2.3 2 Molded Case Circuit Breakers Series C 100% Rated Digitrip OPTIM Circuit Breakers with Interchangeable Rating Plug Order as individual components: Breaker Frame (which includes Trip Unit), Rating Plug, Terminals.
PAGE 300
2.
PAGE 301
2.
PAGE 302
Molded Case Circuit Breakers Series C 2.
PAGE 303
2.
PAGE 304
Molded Case Circuit Breakers Series C 2.
PAGE 305
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals Eaton’s line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA Standard C22.2 No. 65M.
PAGE 306
2.3 Molded Case Circuit Breakers Series C Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 307
2.
PAGE 308
Molded Case Circuit Breakers Series C 2.
PAGE 309
2.
PAGE 310
Molded Case Circuit Breakers Series C 2.3 Digitrip OPTIM Specifications 2 Trip Unit Type Digitrip OPTIM 550 Digitrip OPTIM 1050 rms sensing Yes Yes 2 Frame L L 2 Ampere range 200–600 A 200–600 A Interrupting rating at 480 volts 35, 65, 100 (kA) 35, 65, 100 (kA) 2 Ordering options LSI, LSI(A), LSIG LSI(A), LSIG 2 Fixed rated plug (In) Yes Yes Overtemperature trip Yes Yes Adjustable rating plug (In) No No Long delay pickup 0.4–1.0 x (In) 0.4–1.
PAGE 311
2.
PAGE 312
Molded Case Circuit Breakers Series C 2.3 Dimensions and Weights 2 Dimensions in Inches (mm) 2 LD Frame Number of Poles Width Height Depth 2, 3 8.25 (209.6) 10.75 (273.1) 4.06 (103.1) 4 11.00 (279.4) 10.75 (273.1) 4.06 (103.1) 2 2 2 LD-Frame, Two- and Three-Pole Side View 2 3.81 (96.8) 2 Front View Front Cover Cutout 2 CL Handle CL Breaker 3.44 (87.3) 1.72 (43.7) 2 3.28 (83.3) 0.25 (6.4) R 2 1.33 (33.7)2.29 (58.2) 10.75 (273.1) 1.50 (38.1) 3.64 (92.5) 2 8.21 (208.
PAGE 313
2.3 2 Molded Case Circuit Breakers Series C Contents Typical M-Frame Circuit Breaker Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 314
2.3 Molded Case Circuit Breakers Series C Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 315
2.
PAGE 316
Molded Case Circuit Breakers Series C 2.
PAGE 317
2.3 2 2 2 2 2 2 2 Series C Types MDL and HMDL Electronic Circuit Breakers with Interchangeable Trip Units Order as Individual Components: breaker frame, trip unit and terminals. See 310+ adjustability specifications on Page V4-T2-219.
PAGE 318
Molded Case Circuit Breakers Series C Molded Case Switches Eaton’s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker 2.3 2 components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489.
PAGE 319
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals M-Frame circuit breakers use Cu/AI terminals as standard. When optional copper or Cu/ AI terminals are required, order by catalog number. Specify if factory installation is required. 2 2 2 2 2 2 2 2 2 2 2 TA700MA1 TA800MA2 TA801MA Line and Load Terminals Maximum Breaker Amperes Terminal Body Material Wire Type AWG Wire Range/No.
PAGE 320
2.3 Molded Case Circuit Breakers Series C Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 321
2.
PAGE 322
2.
PAGE 323
2.3 2 2 2 2 2 Molded Case Circuit Breakers Series C Dimensions and Weights Dimensions in Inches (mm) MD Frame Number of Poles Width Height Depth 2, 3 8.25 (209.6) 16.00 (406.4) 4.06 (103.1) MDL-Frame, Two- and Three-Pole Drilling Plan 2 2 Front View Side View 8.25 (209.6) 4.06 (103.2) 3.44 (87.3) 1.72 (43.7) 2 R 0.25 (6.4) CL Breaker 2 2 2 2 R 0.19 (4.8) CL Handle 1.33 (33.7) 1.50 (38.1) 0.97 (24.6) 2 3.64 (92.5) 2 7.28 (184.9) 2 2 2 2 2 2 2 16.00 (406.4) 3.28 (83.
PAGE 324
Molded Case Circuit Breakers Series C Typical N-Frame Breaker 2.3 Contents Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . . K-Frame (70–400 Amperes) . .
PAGE 325
2.3 2 2 2 Molded Case Circuit Breakers Series C Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 326
Molded Case Circuit Breakers Series C 2.3 Product Selection 2 Digitrip OPTIM Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 327
2.
PAGE 328
2.
PAGE 329
2.3 2 Molded Case Circuit Breakers Series C 100% Rated Digitrip OPTIM Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit), rating plug, terminals.
PAGE 330
Molded Case Circuit Breakers Series C 2.
PAGE 331
2.
PAGE 332
Molded Case Circuit Breakers Series C 2.
PAGE 333
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals—Ordering Information N-Frame circuit breakers use Cu/AI terminals as standard. When optional copper or Cu/AI terminals are required, order by catalog number. Specify if factory installation is required.
PAGE 334
2.3 Molded Case Circuit Breakers Series C Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 335
2.
PAGE 336
Molded Case Circuit Breakers Series C 2.3 N-Frame Digitrip 2 Trip Unit Type Digitrip OPTIM 550 Digitrip OPTIM 1050 rms sensing Yes Yes 2 Frame N N 2 Ampere range 400–1200 A 400–1200 A Interrupting rating at 480 volts 50, 65, 100 (kA) 50, 65, 100 (kA) 2 Ordering options LSI, LSIG, LSI(A) LSI(A), LISG 2 Fixed rated plug (In) Yes Yes Overtemperature trip Yes Yes Adjustable rating plug (In) No No Long delay pickup 0.4–1.0 x (In) 0.4–1.
PAGE 337
2.
PAGE 338
Molded Case Circuit Breakers Series C 2.3 Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 ND Frame Number of Poles Width Height Depth 2, 3 4 8.25 (209.6) 16.00 (406.4) 5.50 (139.7) 11.13 (282.6) 16.00 (406.4) 5.50 (139.7) 2 2 2 ND-Frame, Two- and Three-Pole 2 Front View Side View 2 Front Cover Cutout 2 3.44 (87.3) 1.72 (43.6) CL Handle 1.91 (48.4) 2 0.25 R (6.4 R) 2 CL Handle 16.00 (406.4) 0.19 R (4.8 R) 3.68 (93.2) 2 ON/I 2 OFF/O 2 1.50 (38.1) 3.
PAGE 339
2.3 2 Molded Case Circuit Breakers Series C Typical R-Frame Breaker Contents Description 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 340
Molded Case Circuit Breakers Series C 2.3 Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 341
2.3 Molded Case Circuit Breakers Series C 2 Product Selection 2 Digitrip RMS 510 Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 342
Molded Case Circuit Breakers Series C 2.3 100% Rated Digitrip RMS 510 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 °C wire is applied at 75 °C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 343
2.3 2 Molded Case Circuit Breakers Series C Digitrip RMS 610 Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 344
Molded Case Circuit Breakers Series C 2.3 100% Rated Digitrip RMS 610 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 °C wire is applied at 75 °C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 345
2.3 2 Molded Case Circuit Breakers Series C Digitrip RMS 810 Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 346
Molded Case Circuit Breakers Series C 2.3 100% Rated Digitrip RMS 810 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 °C wire is applied at 75 °C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 347
2.3 2 Molded Case Circuit Breakers Series C Digitrip RMS 910 Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 348
Molded Case Circuit Breakers Series C 2.3 100% Rated Digitrip RMS 910 Circuit Breakers The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90 °C wire is applied at 75 °C ampacity. Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 349
2.3 2 Molded Case Circuit Breakers Series C Digitrip OPTIM Electronic Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 350
Molded Case Circuit Breakers Series C 2.3 100% Rated 600 Volts AC Digitrip OPTIM Circuit Breakers with Interchangeable Rating Plugs Order as individual components: breaker frame (which includes trip unit) and rating plug.
PAGE 351
2.3 Molded Case Circuit Breakers Series C 2 Accessories Selection Guide and Ordering Information 2 Line and Load Terminals Line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. All terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B and CSA C22.2 No. 65M. Unless otherwise specified, R-Frame circuit breaker line load terminals are shipped separately for field installation.
PAGE 352
Molded Case Circuit Breakers Series C 2.3 Mounting Hardware 2 2 Breaker Line/Load Conductors 2 2 2 2 2 2 2 2 2 TA2000RD 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 353
2.3 Molded Case Circuit Breakers Series C 2 Accessories 2 Allowable Accessory Combinations Different combinations of accessories can be supplied, depending on the types of accessories and the number of poles in the circuit breaker.
PAGE 354
Molded Case Circuit Breakers Series C 2.
PAGE 355
2.
PAGE 356
Molded Case Circuit Breakers Series C 2.
PAGE 357
2.3 2 2 Molded Case Circuit Breakers Series C Dimensions and Weights Dimensions in Inches (mm) RD Frame 2 Number of Poles Width Height Depth 2 3 15.50 (393.7) 16.00 (406.4) 9.75 (247.7) 4 20.00 (508.0) 16.00 (406.4) 9.75 (247.7) 2 RD-Frame, Three-Pole, 1600 and 2000 Amperes 2 Front View 2 2 7.25 (184.2) 2 2 2 14.50 (368.3) 11.13 (0.4) Dia. (4 Holes) Use 4, 0.38 (Mil) Dia. Bolts for Mounting Breaker 5.09 (129.4) 9.69 (246.1) C L Handle 16.00 (406.4) 15.00 (381.0) Push To Trip 6.
PAGE 358
Molded Case Circuit Breakers Series C 2.3 Contents Motor Circuit Protectors Description Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . . K-Frame (70–400 Amperes) .
PAGE 359
2.3 2 2 2 Molded Case Circuit Breakers Series C Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 360
Molded Case Circuit Breakers Series C 2.3 Product Selection 2 G-Frame 2 480 Vac Maximum, 600Y/347 Vac NEMA Starter Size Continuous Amperes Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP Catalog Number 0 3 A 1.1–1.2 15 GMCP003A0C B 1.3–1.5 18 C 1.6–1.7 21 D 1.8–1.9 24 E 2.0–2.2 27 0 0 1 2 3 3 7 15 30 50 60 63 F 2.3–2.5 30 A 2.6–3.1 35 B 3.2–3.6 42 C 3.7–3.9 49 D 4.3–4.7 56 E 4.8–5.2 63 F 5.3–5.7 70 A 5.7–6.8 75 B 6.
PAGE 361
2.3 Molded Case Circuit Breakers Series C 2 Accessories 2 Modifications for GMCP Internal accessories must be factory installed. 2 Internal Accessories 1 2 Type Accessory Volts Frequency Amperes Contact Arrangement Factory Suffix Style Number 1373D62G18 2 2 2 2 2 Electrical Ratings Shunt trip 2 120 50/60 Hz 1.1 — S5 Shunt trip 2 240 50/60 Hz 2.1 — S6 1373D62G19 Auxiliary switch 3 240 50/60 Hz 6.0 1A/1B A3 1288C74G03 Auxiliary switch 3 240 50/60 Hz 6.
PAGE 362
2.3 Molded Case Circuit Breakers Series C F-Frame 2 600 Vac Maximum, 250 Vdc Maximum NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 0 3 A 0.69–0.91 B 0.92–1.0 C 1.1–1.2 D 1.3–1.5 E 1.6–1.7 F G H 0 0 1 2 7 15 30 50 600 Vac Maximum, 250 Vdc Maximum, continued 2 MCP Catalog Number NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 9 HMCP003A0C 2 70 A 16.1–21.4 210 12 B 21.5 –26.8 280 15 C 26.9 –32.
PAGE 363
2.3 Molded Case Circuit Breakers Series C 2 Special Low Magnetic Protection Application MCP 2 600 Vac Maximum, 250 Vdc Maximum 2 Cont.
PAGE 364
2.3 Molded Case Circuit Breakers Series C MCPs for Application with Motor Starters Equipped with Electronic Overload Relays 600 Vac Maximum, 250 Vdc Maximum NEMA Starter Size Cont. Amps 0 3 0 0 1 2 7 15 30 50 2 600 Vac Maximum, 250 Vdc Maximum, continued Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting A B 15 18 1.6–1.7 F G Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting A B 2 MCP Catalog Number NEMA Starter Size Cont. Amps 0.69–0.
PAGE 365
2.3 Molded Case Circuit Breakers Series C 2 J-Frame 2 600 Vac Maximum, 250 Vdc Maximum 2 2 2 MCP Catalog Number 3 NEMA Starter Size Cont. Amps Cam Setting 27.0–30.7 350 HMCP250A5C 5 250 A 30.8–33.8 400 B NEMA Starter Size Cont. Amps Cam Setting 4 250 A B 2 600 Vac Maximum, 250 Vdc Maximum, continued Motor Full Load Current Amperes (FLA) 1 Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP Trip Setting 2 MCP Catalog Number 3 67.4–75.3 875 HMCP250J5C 75.4–83.
PAGE 366
2.3 Molded Case Circuit Breakers Series C K-Frame 2 600 Vac Maximum, 250 Vdc Maximum 2 MCP Catalog Number 3 NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 1 27.0–30.7 350 HMCP400A5C 5 400 A 77.0–86.5 B 30.8–33.8 400 B 86.6–96.1 1125 C 33.9–36.9 440 C 96.2–105.7 1250 D 37.0–40.3 480 D 105.8–115.3 1375 E 40.4–43.8 525 E 115.4–124.9 1500 F 43.9–46.9 570 F 125.0–134.6 1625 G 47.0–50.7 610 G 134.7–144.2 1750 H 50.8–53.
PAGE 367
2.3 Molded Case Circuit Breakers Series C L-Frame 2 2 2 2 600 Vac Maximum, 250 Vdc Maximum, continued NEMA Starter Size Cont. Amps 5 400 Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting 600 Vac Maximum 2 MCP Catalog Number 3 NEMA Starter Size Cont. Amps HMCP400R5C 6 600 4 Cam Setting Motor Full Load Current Amperes (FLA) 1 MCP Trip Setting MCP Catalog Number HMCP600L6W A 134.7–151.5 1750 A 138.5–184.5 1800 2 B 151.6–168.4 1970 B 184.6–230.
PAGE 368
Molded Case Circuit Breakers Series C 2.3 N-Frame 2 600 Vac Maximum 1 NEMA Starter Size Cont. Amps Cam Setting Motor Full Load Current Amperes (FLA) 2 MCP Trip Setting MCP Catalog Number 7 800 A 123.1–184.5 1600 HMCP800X7W B 184.6–246.1 2400 C 246.2–307.6 3200 D 307.7–369.1 4000 E 369.2–430.7 4800 F 430.8–492.2 5600 G 492.3–553.7 6400 A 184.6–276.8 2400 B 276.9–369.1 3600 C 369.2–461.4 4800 D 461.5–553.7 6000 E 553.8–646.1 7200 F 646.2–738.4 8400 G 738.
PAGE 369
2.3 2 Molded Case Circuit Breakers Series C Contents Motor Protection Circuit Breakers Description 2 Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 370
2.
PAGE 371
2.3 2 Molded Case Circuit Breakers Series C Contents Type ELC Current Limiter Attachment Description 2 Page V4-T2-116 V4-T2-117 V4-T2-118 V4-T2-121 V4-T2-135 V4-T2-152 V4-T2-160 V4-T2-184 V4-T2-210 V4-T2-221 V4-T2-236 V4-T2-255 V4-T2-266 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes). . . . . . . . . . . . . . . . . . .
PAGE 372
Molded Case Circuit Breakers Series C 2.3 Contents Current Limiting Circuit Breaker Module Description Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 373
2.
PAGE 374
2.3 Molded Case Circuit Breakers Series C Dimensions and Weights 2 Approximate Dimensions in Inches (mm) 2 Assembled Breaker and Current Limiting Module Frame Height Width Depth Weight in lbs (kg) FD + limiter 12.06 (306.3) 4.13 (104.9) 3.39 (86.1) 8.50 (3.86) 2 2 FD-Frame With Current Limiter Module 2 2 4.13 (104.9) 4.12 (104.6) 2 2 2 2 2 12.06 (306.3) 2 2 3.96 (100.5) 3.34 (84.8) 2 2 3.39 (86.
PAGE 375
2.3 2 Molded Case Circuit Breakers Series C Contents Series C Internal Accessories Description 2 Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes). . . . . . . . . . . . . . . . . . . .
PAGE 376
Molded Case Circuit Breakers Series C Undervoltage Release Mechanism The undervoltage release mechanism monitors a voltage (typically a line voltage) and trips the circuit breaker when the voltage falls to between 70 and 35 percent of the solenoid coil rating. The undervoltage release mechanism consists of a continuous rated solenoid with a plunger and tripping lever mounted in a plug-in module.
PAGE 377
2.
PAGE 378
2.3 Molded Case Circuit Breakers Series C K-Frame and HMCP (K) Alarm Switch Factory Mounted Connection Type and Location Number of Sets of Contacts (1M and 1B) 2 Field Mounted Field Installation Kits 18-Inch (457.
PAGE 379
2.3 2 2 Molded Case Circuit Breakers Series C Auxiliary Switch Auxiliary Switch G-Frame Auxiliary Switch (RH Only) Electrical Ratings 2 a 2 b 2 Volts Frequency Amperes Contact Arrangement Factory Suffix Catalog Number 12 240 50/60 Hz 6 1a/1b A3 1288C74G03 240 50/60 Hz 6 2a/2b A6 1288C73G03 F-Frame and HMCP (F) Auxiliary Switch 2 Factory Installation Kit 4 Factory Mounted Connection Type and Location 2 18-Inch (457.
PAGE 380
2.3 Molded Case Circuit Breakers Series C K-Frame and HMCP (K) Auxiliary Switch Factory Mounted Connection Type and Location Factory Installation Kit 18-Inch (457.
PAGE 381
2.
PAGE 382
2.
PAGE 383
2.3 2 2 Series C Shunt Trip Shunt Trip 2 2 Molded Case Circuit Breakers G-Frame Shunt Trip (LH Three-Pole Only) Electrical Ratings ST a 2 2 Volts Frequency Amperes Suffix Number Catalog Number 120 50/60 Hz 1.1 S1 1373D62G01 240 50/60 Hz 2.1 S2 1373D62G02 12 DC 2.8 S3 1373D62G15 24 DC 5.
PAGE 384
2.3 Molded Case Circuit Breakers Series C J-Frame and HMCP (J) Shunt Trip Factory Mounted 2 Field Mounted Connection Type and Location Field Installation Kits 18-Inch (457.
PAGE 385
2.3 2 Molded Case Circuit Breakers Series C L-, HMCP (L) and (M) Frames and Shunt Trip 2 2 2 2 2 Factory Mounted Field Mounted Connection Type and Location Field Installation Kits 1 18-Inch (457.
PAGE 386
2.3 Molded Case Circuit Breakers Series C N-Frame and HMCP (N) Shunt Trip Factory Mounted 2 Field Mounted Connection Type and Location Field Installation Kits 18-Inch (457.
PAGE 387
2.3 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Series C Low Energy Shunt Trip Ordering Information Select shunt trip catalog number for the voltage within the indicated voltage range. Shunt trip coils are designed to be applied at specific AC or DC voltages within the voltage range shown. Electrical ratings are also shown on applicable circuit breaker accessory nameplates.
PAGE 388
2.3 Molded Case Circuit Breakers Series C Undervoltage Release Mechanism Ordering Information 2 Select handle reset undervoltage release mechanism catalog number for the voltage within the indicated voltage range. Undervoltage release mechanism coils are designed to be applied at specific AC or DC voltages within the voltage range shown on applicable circuit breaker accessory nameplates.
PAGE 389
2.
PAGE 390
Molded Case Circuit Breakers Series C 2.3 F-Frame Field Mounted Undervoltage Release Mechanism F-Frame Breaker 2 Pigtail Leads Terminal Block Pigtail Leads Terminal Block 2 Catalog Number Catalog Number Catalog Number Catalog Number 2 UVH1LP02K UVH1LT02K MUVH1LP02K MUVH1LT02K 2 Factory Installation Voltage Rating (AC Freq.
PAGE 391
2.3 2 Molded Case Circuit Breakers Series C J-Frame and HMCP (J) Undervoltage Release Mechanism Factory Mounted Field Mounted 2 Connection Type and Location Field Installation Kits 2 2 18-Inch (457.2 mm) Pigtail Leads Terminal Block 1 Same Side Rear 2 Opposite Side Same Side Pigtail Leads Terminal Block 3 Suffix Number Suffix Number Suffix Number Suffix Number Catalog Number Catalog Number 2 Voltage Rating (AC Freq.
PAGE 392
Molded Case Circuit Breakers Series C 2.3 K-Frame and HMCP (K) Undervoltage Release Mechanism Factory Mounted Connection Type and Location Field 2 Installation Kits 1 Terminal Block 18-Inch (457.2 mm) Pigtail Leads Voltage Rating (AC Freq.
PAGE 393
2.3 2 Molded Case Circuit Breakers Series C L-, HMCP (L) and (M)-Frames and Undervoltage Release Mechanism Factory Mounted Field Mounted 2 Connection Type and Location Field Installation Kits 1 2 18-Inch (457.2 mm) Pigtail Leads 2 2 Voltage Rating (AC Freq.
PAGE 394
Molded Case Circuit Breakers Series C 2.3 N-Frame and HMCP (N) Undervoltage Release Mechanism Factory Mounted Connection Type and Location Field Installation Kits 18-Inch (457.2 mm) Pigtail Leads Voltage Rating (AC Freq.
PAGE 395
2.
PAGE 396
2.3 Molded Case Circuit Breakers Series C Technical Data and Specifications 2 Alarm Switch F-Frame Electrical Rating Data 12 Maximum Voltage Frequency Maximum Current Amperes Dielectric Withstand Voltage Multi-Pole Circuit Breakers Maximum Voltage Frequency Maximum Current Amperes Dielectric Withstand Voltage 600 50/60 Hz 6 2500 3 2500 2500 600 50/60 Hz 6 2500 125 DC 0.50 125 DC 0.50 3 2500 250 DC 0.25 3 DC 3 2500 250 0.
PAGE 397
2.3 Molded Case Circuit Breakers Series C 2 Auxiliary Switch 2 F-Frame Electrical Rating Data 12 Maximum Voltage Frequency 125 3 2 600 2 2 2 2 2 2 L- and M-Frames Electrical Rating Data 2 Maximum Current Amperes Dielectric Withstand Voltage Maximum Voltage 50/60 Hz 1 2500 600 50/60 Hz 6 2500 50/60 Hz 6 2500 125 DC 0.50 4 2500 125 DC 0.50 4 2500 250 DC 0.25 4 2500 250 DC 0.
PAGE 398
2.3 Molded Case Circuit Breakers Series C Auxiliary Switch and Alarm Switch Combination 2 L- and M-Frames Electrical Rating Data 25 F-Frame Electrical Rating Data 12 Maximum Voltage Frequency Maximum Current Amperes Dielectric Withstand Voltage Maximum Voltage Frequency Maximum Current Amperes Dielectric Withstand Voltage 600 50/60 Hz 6 2500 600 50/60 Hz 6 2500 3 2200 125 2200 250 125 DC 0.50 250 DC 0.25 3 DC 0.50 3 2500 DC 0.
PAGE 399
2.3 Molded Case Circuit Breakers Series C 2 Shunt Trip 2 F-Frame Electrical Rating Data 123 2 Supply Voltage Minimum Operating Voltage 2 12 6.75 24 6.75 300 2 48 36 92 2 60 36 140 110 156 480 2 120 156 570 127 156 2 208 220 50/60 Hz K-Frame Electrical Rating Data 678 DC 50/60 Hz VA Supply Voltage Minimum Operating Voltage 75 12 DC VA Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA 9 100 12 9 45 12 8.
PAGE 400
2.3 Molded Case Circuit Breakers Series C L- and M-Frame Electrical Rating Data 123 N-Frame Electrical Rating Data 125 50/60 Hz 50/60 Hz DC 2 DC Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA Supply Voltage Minimum Operating Voltage VA 12 9 45 12 9 35 24 16.8 200 24 16.8 170 24 9 200 24 9 170 48 33.6 830 48 33.6 710 48 34 830 48 34 710 60 60 33.6 1280 60 33.
PAGE 401
2.3 Molded Case Circuit Breakers Series C 2 R-Frame Electrical Rating Data 123456 2 Suffix Number Voltage (V) Frequency (Hz) 2 03/03K 24 50/60 24 DC 48–60 50/60 48 34.0 13.1 — 9.2 450 1120 48–60 50/60 60 34.0 17.2 — 12.2 740 1120 Application Ratings 2 05/05K 2 11/11K 3 2 2 2 2 14/14K 2 2 2 18/18K 2 2 2 23/23K 26/26K 2 2 2 2 Electrical Operating Ratings Minimum Operating Voltage (V) Ip (A) Irms at 0.250s (A) Irms at 0.
PAGE 402
Molded Case Circuit Breakers Series C 2.3 Undervoltage Release Mechanism 2 F-Frame Electrical Rating Data 1 50/60 Hz 2 DC Supply Voltage Dropout Voltage Pickup Voltage Supply Voltage Dropout Voltage Pickup Voltage Minimum Maximum Maximum VA Minimum Maximum Maximum VA 12 4.2 6.3 7.6 12 4.2 6.3 7.6 1.3 12 4.2 8.4 10.2 2.8 2.5 12 4.2 8.4 10.2 2.8 24 8.4 16.8 20.4 1.4 24 8.4 16.8 20.4 1.6 48 21.0 33.6 40.8 1.2 48 21.0 33.6 40.8 1.3 60 21.0 33.6 40.
PAGE 403
2.3 2 2 Molded Case Circuit Breakers Series C K-Frame Electrical Rating Data 1 50/60 Hz DC Supply Voltage Dropout Voltage Pickup Voltage Minimum Maximum Maximum Dropout Voltage Pickup Voltage Minimum Maximum Maximum VA 12 4.2 8.4 10.2 1.9 2 24 8.4 16.8 20.4 3.9 12 4.2 8.4 10.2 1.6 24 8.4 16.8 20.4 48 21.0 33.6 40.8 2.5 3.1 48 21.0 33.6 40.8 2.0 2 60 21.0 33.6 40.8 110 44.5 77.0 93.5 3.8 60 21.0 33.6 40.8 3.1 1.8 110 44.5 77.0 93.
PAGE 404
Molded Case Circuit Breakers Series C 2.3 N-Frame Electrical Rating Data 1 50/60 Hz 2 DC Dropout Voltage Pickup Voltage Minimum Maximum Maximum VA Supply Voltage Dropout Voltage Pickup Voltage Minimum Maximum Maximum VA 12 4.2 8.4 10.2 1.9 24 8.4 16.8 20.4 3.9 12 4.2 8.4 10.2 1.6 24 8.4 16.8 20.4 3.1 48 21.0 33.6 40.8 2.5 48 21.0 33.6 40.8 2.0 60 21.0 33.6 110 44.5 77.0 40.8 3.8 60 21.0 33.6 40.8 3.1 93.5 1.8 110 44.5 77.0 93.5 1.6 120 44.
PAGE 405
2.3 2 Molded Case Circuit Breakers Series C R-Frame AC Undervoltage Release Mechanism (Handle Reset) Ratings 12 Application Ratings Electrical Operating Ratings Catalog Suffix Voltage (V) Supply Voltage (V) Minimum 02/02K 12 12 4.2 03/03K 24 24 8.4 2 05/05K 48–60 2 08/08K 2 2 2 110–127 2 Dropout Voltage (V) Approximate Operating Time (ms) Maximum Pickup Voltage (V) Max. 8.4 10.2 16.8 20.
PAGE 406
Molded Case Circuit Breakers Series C 2.3 Contents Series C External Accessories Description Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . . . . . Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . G-Frame (15–100 Amperes) . . . . . . . . . . . . . . . . . . . F-Frame (10–225 Amperes) . . . . . . . . . . . . . . . . . . . J-Frame (70–250 Amperes) . . . . . . . . . . . . . . . . . . .
PAGE 407
2.3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Series C Terminal End Covers The terminal end covers are designed for use in motor control center applications where, because of confined spaces, line side conductors are normally custom fitted. The molded end covers are made of high dielectric glasspolyester and slide over the line ends of the circuit breaker. Close fitting conductor openings are molded into the end covers.
PAGE 408
Molded Case Circuit Breakers Series C The electrical (motor) operator allows the circuit’s breaker to be opened, closed or reset remotely. It also has a lock-off capability and provisions for manual operation. The electrical (motor) operator contains a reversible motor connected to a ball screw. The ball screw drives the circuit breaker handle. Limit switches and relays are used to control the motor. Plug-In Adapters Plug-in adapters simplify installation and front removal of circuit breakers.
PAGE 409
2.3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Series C Breaker Interface Module (BIM) The Breaker Interface Module (BIM) is a panel mounted user interface device that is mounted on the front of an electrical assembly or at a remote location. The BIM is used to access, configure, test and display information for OPTIM trip units and other devices.
PAGE 410
Molded Case Circuit Breakers Series C 2.3 Product Selection 2 Termination Hardware—End Cap Kit End Cap Kit 2 End Cap Kit Thread Type 2 Thread Size Catalog Number Imperial 10–32 KPEK12 Metric M–5 KPEKM12 2 Imperial 10–32 KPEK1 2 Metric M–5 KPEKM1 2 Imperial 10–32 KPEK14 2 Metric M–5 KPEKM14 2 Imperial 0.312–18 KPEK2 Metric M–8 KPEKM2 2 Imperial 0.312–18 KPEK24 2 Metric M–8 KPEKM24 2 Imperial 0.312–18 KPEK3 2 Metric M–8 KPEKM3 2 Imperial 0.
PAGE 411
2.3 Molded Case Circuit Breakers Series C 2 Termination Hardware 2 J-Frame Plug Nut 2 2 2 2 J-Frame Plug Nut Thread Type K-Frame Terminal Adapter 2 Thread Size Catalog Number Package of 6 Imperial 0.250–20 PLN2 Metric M–6 PLN2M K-Frame Terminal Adapter 1 Line/Load End Catalog Number Line and load TAD3 2 2 2 2 F-Frame Ordering Information Terminals must be ordered separately. Priced individually.
PAGE 412
Molded Case Circuit Breakers Series C 2.
PAGE 413
2.3 Molded Case Circuit Breakers Series C Imperial Thread Mounting Hardware 2 Number of Poles 2 Description Type of Mounting Catalog Number 0.164-32 x 3.188-inch pan-head steel screws, lockwashers and clamps Individual 624B375G01 Group 1 624B375G02 F-Frame 2 1 2 2 0.164-32 x 1.5-inch pan-head steel screws and lockwashers Individual 4218B80G01 2 3, 4 0.164-32 x 1.5-inch pan-head steel screws and lockwashers Individual BMH1 2 2, 3, 4 0.250-20 x 2.
PAGE 414
Molded Case Circuit Breakers Series C 2.
PAGE 415
2.3 2 K-Frame 2 2 Molded Case Circuit Breakers Series C K-Frame Terminal Shield Number of Poles Location Catalog Number (Package of 10) 2, 3 Line TS33LN 4 Line TS34LN 3 Load TS33LD Interphase Barriers Ordering Information Two per package.
PAGE 416
Molded Case Circuit Breakers Series C 2.
PAGE 417
2.
PAGE 418
Molded Case Circuit Breakers Series C 2.3 Key Interlock Kit Ordering Information Key interlock kits contain the necessary interface and hardware to install a trapped key interlock from one of the listed manufacturers. Key interlocks are not installed or supplied as part of the breaker, and must be obtained separately from the lock manufacturer or through the manufacturer of the equipment on which the breaker will be installed. Select the mounting kit catalog number to match the type of lock used.
PAGE 419
2.3 2 2 2 2 2 Molded Case Circuit Breakers Series C Sliding Bar Interlock Ordering Information The sliding bar interlock is available for mounting between two adjacent threepole circuit breakers with circuit breakers centerline Sliding Bar Interlock spacing as indicated in table and enclosure front panel thickness of 1/8 or 3/16 inch (3.2 or 4.8 mm). (For field installation only.) Sliding Bar Interlock Centerline Spacing in Inches (mm) Catalog Number F 4.19 (106.4) SBK1 2 J 4.38 (111.
PAGE 420
Molded Case Circuit Breakers Series C 2.3 Electrical Operator 2 F-Frame Electrical (Solenoid) Operator 2 Terminal Block 18-Inch (457.2 mm) Pigtail Lead Catalog Number 2 2 Voltage Frequency Catalog Number 120 AC EOP1T07 EOP1P07 240 AC EOP1T11 EOP1P11 2 F-Frame Electrical (Motor) Operator 1 2 18-Inch (457.
PAGE 421
2.
PAGE 422
Molded Case Circuit Breakers Series C 2.
PAGE 423
2.
PAGE 424
Molded Case Circuit Breakers Series C 2.3 Panelboard Connecting Straps 2 F-Frame Panelboard Connecting Straps Bus Spacing in Inches (mm) Continuous Current Rating (Amperes) 2.75 (69.9) 2 Pole Connector Type Center Outside Catalog Number Catalog Number 50 673B142G02 673B142G09 2.75 (69.9) 100 673B142G02 673B142G10 2.75 (69.9) 150 673B142G04 673B142G03 3.50 (88.9) 50 1253C72G01 1253C72G03 3.50 (88.9) 100 1253C73G03 1253C73G06 3.50 (88.
PAGE 425
2.3 2 2 2 Molded Case Circuit Breakers Series C L-Frame Panelboard Connecting Straps Continuous Current Rating (Amperes) 600 Pole Connector Type Center Outside Catalog Number Catalog Number 624B609G01 506C052G01 2 2 L-Frame Mounting Bracket 2 Number of Poles Catalog Number 2, 3 208B297H01 2 2 2 2 M-Frame Panelboard Connecting Straps Bus Spacing in Inches (mm) Continuous Current Rating (Amperes) 3.50 (88.
PAGE 426
2.
PAGE 427
2.3 2 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Series C Breaker Interface Module (BIM) The Breaker Interface Module (BIM) is a panel mounted user interface device that is mounted on the front of an electrical assembly or at a remote location. The BIM is used to access, configure, test and display information for OPTIM trip units and other devices.
PAGE 428
Molded Case Circuit Breakers Series C 2.3 Accessories 2 Flex Shaft Accessories (F- through R-Frame) NEMA 12 Safety Door Hardware for Flex Shaft and C371 Handle Length in Inches (mm) Catalog Number 2 4 (101.6) C361KJ4 6 (152.4) Roller Latch 1 C361KJ6 3 C361KR Series C Rotary Accessories As an option, an auxiliary switch is offered so that the control panel builder may electrically indicate the status of the breaker. This accessory would be mounted on the mechanism and comes with 24-inch (609.
PAGE 429
2.
PAGE 430
2.3 Molded Case Circuit Breakers Series C Dimensions Approximate Dimensions in Inches (mm) 2 Rear Connecting Studs 2 2 F-Frame 1 Stud Ampere Rating Stud Catalog Number Panel Thickness Tube Length A B Dimensions C Tube Catalog Number D E F 2 2 For 15 to 100 Ampere Circuit Breakers 100 A short 451D874G01 1.00 (25.4) 1.06 (26.9) — 32B9446H20 — 3.63 (92.1) 0.31 (7.9)–18 100 A short 451D874G01 0.69–0.94 (17.5 to 23.8) 1.38 (34.9) — 32B9446H21 — 3.63 (92.1) 0.31 (7.
PAGE 431
2.3 Molded Case Circuit Breakers Series C 2 Approximate Dimensions in Inches (mm) 2 J-Frame Stud Ampere Rating Stud Catalog Number Panel Thickness Tube Length A B C Tube Catalog Number 2 250A short 5010D23G01 0.75–1.00 (19.1–25.4) 0.84 (21.4) — 456D983H05 250A short 5010D23G01 0.50–0.75 (12.7–19.1) 1.09 (27.7) — 456D983H06 2 250A short 5010D23G01 0.25–0.50 (6.4–12.7) 1.03 (26.2) — 456D983H07 250A long 5010D23G02 0.75–1.00 (19.1–25.4) — 3.88 (98.
PAGE 432
Molded Case Circuit Breakers Series C 2.3 Approximate Dimensions in Inches (mm) 2 L-Frame 2 Stud Length (A) Stud Catalog Number 5.47 (138.9) 314C960G07 7.97 (202.4) 314C960G08 10.47 (265.9) 314C960G09 .44 (11.2) 2 2 2 2 A 2 Insulators Washer 2 Nut 2 Circuit Breaker Insulating Panel 2 Rear Connecting Stud 2 2 M-Frame Stud Ampere Rating Diameter and Thread Extension Back of Breaker Stud Catalog Number 225 0.50 (12.7)–13 3.66 (93.0) 314C960G01 400 0.75 (19.1)–16 5.91 (150.
PAGE 433
2.4 2 Molded Case Circuit Breakers Definite Purpose Contents GP, FP, KP, LP and MP Frames Description 2 Page Product Selection Guide . . . . . . . . . . . . . . . . . . . Electrical Characteristics . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Base Mounting Hardware . . . . . . . . . . . . . . . . Line and Load Termination. . . . . . . . . . . . . . . . Optional Line and Load Terminals . . . . . . . . . . Catalog Number Selection . . . . .
PAGE 434
2.
PAGE 435
2.
PAGE 436
2.4 Molded Case Circuit Breakers Definite Purpose Features Base Mounting Hardware English base mounting hardware is included with GP frame only. For all other frames, order base mounting hardware separately as per the table to the right. 2 Base Mounting Hardware 2 Catalog Number Frame English Metric GP Included — FP BMH1 BMH1M KP BMH3 BMH3M LP BMH4 BMH4M MP BMH5 BMH5M 2 2 2 A separate catalog number is not required.
PAGE 437
2.4 2 2 Molded Case Circuit Breakers Definite Purpose Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units.
PAGE 438
Molded Case Circuit Breakers Definite Purpose 2.4 Product Selection 2 Catalog Numbers When ordering Definite Purpose breakers, use the appropriate catalog numbers given below.
PAGE 439
2.4 2 KP 250 Molded Case Circuit Breakers Definite Purpose Dimensions KP-Frame/200–400 A Three-Pole 2 Frame/ Ampere Rating Catalog Number 2 KP/175–400 A circuit breakers KPS3175 KPS3200 2 KPS3250 2 KPS3400 KPS3300 2 KPH3175 2 KPH3250 KPH3200 KPH3300 2 KP/400 A molded case switch LP 400 Contact Eaton for detailed outline drawings. GP, FP, KP, LP and MP Definite Purpose Frames Breaker Type GP FP KP LP MP Width 3.00 (76.2) 4.13 (104.9) 5.49 (139.4) 8.25 (209.6) 8.25 (209.
PAGE 440
Molded Case Circuit Breakers Metering and Communications 2.5 Contents PM3 Modules Description Page PM3 Monitoring and Metering Module Product Selection . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions and Weights . . . . . . . . . . . . . . . . .
PAGE 441
2.5 Molded Case Circuit Breakers Metering and Communications 2 Product Selection 2 PM3 Modules 2 Frame 2 Catalog Number PM3 Power Monitoring and Communications Module Technical Specifications for Modbus RTU 480 V 600 V Description FD — PM3FM Pickup current 0.
PAGE 442
2.5 Molded Case Circuit Breakers Metering and Communications Dimensions and Weights 2 Approximate Dimensions in Inches (mm) FD Three-Pole with PM3 Modbus 1.38 (35.1) 0.69 (17.5) 2 JG Three-Pole with PM3 Modbus 3.50 (88.9) 3.39 (86.1) 3.19 (81.0) Line End 1.38 (35.1) 0.69 (17.5) Line End 2 3.57 (90.7) 3.44 (87.4) 3.34 (84.8) 2 123456789101112131415 3.63 (92.2) On Off 3.63 (92.2) 6.00 (152.4) CL Handle O F F LED 5.50 (139.7) 3.95 (100.3) 7.00 (177.
PAGE 443
2.6 2 Molded Case Circuit Breakers Specialty Breakers Contents Engine Generator Circuit Breakers Description 2 Page Engine Generator Circuit Breakers Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories Selection Guide and Ordering Information . . . . . . . . . . . . . . . . . . . Options and Accessories . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . . Dimensions and Weights . . .
PAGE 444
Molded Case Circuit Breakers Specialty Breakers 2.6 Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers.
PAGE 445
2.6 2 2 2 2 2 2 Molded Case Circuit Breakers Specialty Breakers Product Selection The following table lists FG through NG engine generator breakers with the maximum generator kVA and kW rating. Engine generator breakers are applied at 115% of the generator full load current rating (FLA). The maximum kW rating is based on threephase generators at 80% power factor.
PAGE 446
2.
PAGE 447
2.6 Molded Case Circuit Breakers Specialty Breakers 2 Accessories Selection Guide and Ordering Information Options and Accessories 2 Enclosures Type 1 General Purpose Standard Terminals 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ● ● ● Surface or flush mounting 15–1200 ampere range 600 Vac, 500 Vdc Type 1 enclosed breakers are designed for use in commercial buildings, apartment buildings and other areas where a general purpose enclosure is applicable.
PAGE 448
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 449
2.6 2 Molded Case Circuit Breakers Specialty Breakers Contents Direct Current Circuit Breakers Description 2 Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection. . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 450
2.
PAGE 451
2.6 2 2 2 Molded Case Circuit Breakers Specialty Breakers Catalog Number Selection This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. DC Circuit Breaker HFDDC 3 150 W 2 2 2 2 2 2 2 2 Frame EGEDC = Series G—E (100 A max.) EGSDC = Series G—E (100 A max.) EGHDC = Series G—E (100 A max.) HFDDC = Series C—F (225 A max.) JGEDC = Series G—J (250 A max.) JGSDC = Series G—J (250 A max.
PAGE 452
2.
PAGE 453
2.
PAGE 454
2.
PAGE 455
2.
PAGE 456
2.
PAGE 457
2.
PAGE 458
2.6 Molded Case Circuit Breakers Specialty Breakers DC Breaker Terminal Wire Ranges Breaker Frame Maximum Breaker Ampacity Terminal Body Material Wire Type AWG Wire Range/ Number of Conductors Metric Wire Range mm2 Number of Terminals Included Standard Terminal Catalog Number EGEDC, EGSDC, EGHDC 100 Aluminum Cu/Al 14–1/0 2.5–50 3 3TA125EF HFDDC 20 Steel Cu/Al 14–10 (1) 2.5–4 (1) 3 3T20FB 100 Steel Cu/Al 14–1/0 (1) 2.
PAGE 459
2.
PAGE 460
Molded Case Circuit Breakers Specialty Breakers 2.6 Wiring Diagrams 2 Series Connection Diagrams for DC Application 12 2 2 250 Vdc Maximum—Two Poles in Series 2 2 2 2 Load 2 Load (A) Suitable for use on ungrounded systems, or grounded systems that have one end of load (A) connected to grounded terminal, opposite poles in series connection. 2 Suitable for use on ungrounded systems only.
PAGE 461
2.6 2 Molded Case Circuit Breakers Specialty Breakers Dimensions Approximate Dimensions in Inches (mm) 2 DC Breaker Dimensions 2 Frame Number of Poles Width Height Depth EGEDC, EGSDC, EGHDC 3 3.00 (76.2) 5.50 (139.7) 2.99 (75.9) HFDDC 1 1.38 (35.1) 6.00 (152.4) 3.38 (86.0) 2 2.75 (70.0) 6.00 (152.4) 3.38 (86.0) 3 4.13 (105.0) 6.00 (152.4) 3.38 (86.0) 4 5.50 (139.7) 6.00 (152.4) 3.38 (86.0) JGEDC, JGSDC, JGHDC 3 4.13 (104.9) 7.00 (177.8) 3.57 (90.7) HJDDC 2, 3 4.
PAGE 462
Molded Case Circuit Breakers Specialty Breakers Contents PVGard Solar Photovoltaic Circuit Breakers Description 600 Vdc Per-Pole 2.6 1000 Vdc Poles-in-Series Page Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers . . . . . . . . . . . . . . . PVGard Solar Circuit Breakers—600 Vdc Per-Pole and 1000 Vdc Poles-in-Series Application Description . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 463
2.6 2 2 2 2 2 2 2 2 2 2 Molded Case Circuit Breakers Specialty Breakers Application Description Features Photovoltaic (PV) systems convert the energy of the sun into electrical power that is fed directly into the electric grid. PVGard circuit breakers are used to protect the wiring from the modules to the combiner box or inverter from overcurrents, and to provide an isolation mechanism.
PAGE 464
2.6 Molded Case Circuit Breakers Specialty Breakers Product Selection 2 Catalog number includes breaker frame and trip unit. Order terminals separately. See Page V4-T2-365. For complete internal and external accessories, see accessory section of each frame. JG PVS Frame KD PVS Frame 2 JG PVS Frame, 250 A Maximum, 600 Vdc Per Pole, 1.
PAGE 465
2.6 2 Molded Case Circuit Breakers Specialty Breakers Catalog number includes breaker frame and trip unit. Order terminals separately. See Page V4-T2-365.
PAGE 466
2.
PAGE 467
2.
PAGE 468
2.6 Molded Case Circuit Breakers Specialty Breakers PVGard Solar Circuit Breaker Terminal Offering Breaker Frame FD PV JG PVS KD PV KD PVS LG PV MDL PV Maximum Breaker Ampacity Terminal Body Material Wire Type AWG Wire Range/ Number of Conductors Metric Wire Range mm2 Number of Terminals Included Standard Terminal Catalog Number 50 Steel Cu/Al 14–4 (1) 2.
PAGE 469
2.
PAGE 470
Molded Case Circuit Breakers Specialty Breakers 2.6 PVGard 600 Vdc Per-Pole Solar PV Circuit Breakers (100% and 80% Rated Frames) JG PVS 2 KD PVS Number of 600 Vdc circuits 3 3 Maximum voltage rating 600 Vdc 600 Vdc Ampere range 90–250 A 100–400 A Interrupting capacity at 600 Vdc 1.
PAGE 471
2.6 2 Molded Case Circuit Breakers Specialty Breakers PVGard 1000 Vdc Solar PV Circuit Breakers (100% and 80% Rated Frames) FD PV KD PV LG PV MDL PV 3 2 Number of poles 4 4 4 2 Maximum voltage rating 1000 Vdc 1000 Vdc 1000 Vdc 1000 Vdc Maximum current rating 100 A 350 A 400 A 600 A 2 Interrupting capacity at 1000 Vdc 3 kA 5 kA 5 kA 7.
PAGE 472
Molded Case Circuit Breakers Specialty Breakers 2.6 Dimensions Approximate Dimensions in Inches (mm) 2 PVGard Solar Circuit Breakers—600 Vdc Per-Pole 2 2 Frame Number of Circuits in a Frame Width Height Depth JG PVS 3 4.13 (104.9) 7.00 (177.8) 3.44 (87.4) KD PVS 3 5.49 (139.4) 10.13 (257.2) 4.31 (109.6) 2 2 2 PVGard Solar Circuit Breakers—1000 Vdc Poles-in-Series Frame Number of Poles Width Height Depth FD PV 4 5.50 (139.7) 6.00 (152.4) 3.38 (86.0) KD PV 4 7.22 (183.4) 10.
PAGE 473
2.6 2 2 2 Molded Case Circuit Breakers Specialty Breakers Wiring Diagrams Series Connection Diagrams for DC Application 12 JF PVS, KD PVS—600 Vdc Per-Pole 2 2 2 2 2 2 Load Suitable for grounded or ungrounded systems. Suitable for quantity (3) 600 Vdc circuits.
PAGE 474
2.6 Molded Case Circuit Breakers Specialty Breakers Contents E2 Mining Service Breakers Description Page Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers . . . . . . . . . . . . . . . PVGard Solar Circuit Breakers—600 Vdc Per-Pole and 1000 Vdc Poles-in-Series . . . . . . . . . . . . . . . E2 Mining Service Breakers Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . .
PAGE 475
2.6 2 2 2 Molded Case Circuit Breakers Specialty Breakers E2 225/400 A K frame and 400/600 A L frame electronic trip units feature specifically designed instantaneous pickup settings to conform exactly with the code of Federal Regulations 30 CFR 75.601-2. Electromechanical trip units are also available with a wide range of magnetic pickup ranges. Eaton’s mining service circuit breakers provide short-circuit protection as specified in the code of Federal Regulations 30 CFR 75.601-2.
PAGE 476
2.6 Molded Case Circuit Breakers Specialty Breakers Catalog Number Selection 2 This information is presented only as an aid to understanding catalog numbers. It is not to be used to build catalog numbers for circuit breakers or trip units. E2 2 2 Mining Service Breaker with 310+ Electronic Trip Unit Technology E2K E M 3 400 38 2 B20 W Frame Size E2K E2L E2M E2N E2R 2 Optional Features Electronic Trip E 1 = Electronic trip Voltage Blank = 600 Vac max. M = 1000Y/577 Vac max.
PAGE 477
2.6 2 Molded Case Circuit Breakers Specialty Breakers E2 Mining Service Breaker Frame Only 1 E2K M 3 400 F 2 2 Frame Size E2J E2K E2L E2M 2 2 2 Voltage Blank = 600 Vac max. M = 1000Y/577 Vac max. 2 2 Frame Size E2F E2J E2K E2L E2M Voltage Blank = 600 Vac max. M = 1000Y/577 Vac max. W 2 = 1200 Vac max.
PAGE 478
Molded Case Circuit Breakers Specialty Breakers 2.6 Undervoltage Release Mechanism Electrical Rating Data Dropout Voltage 2 Pickup Voltage Breaker Type Supply Voltage Minimum Maximum Maximum VA E2F/E2FM 110 Vac 44.5 77 93.5 1.3 E2J/E2JM 120 Vac 1.5 127 Vac 1.7 110 Vdc 1.5 120 Vdc 1.7 125 Vdc 1.9 110 Vac 44.5 77 93.5 2.1 127 Vac 2.4 110 Vdc 1.6 120 Vdc 1.9 E2LME/E2LMZ 110 Vac 77 93.5 2.1 2.4 110 Vdc 1.6 120 Vdc 1.9 125 Vdc 2.2 44.5 77 93.5 1.13 127 Vac 1.
PAGE 479
2.6 Molded Case Circuit Breakers Specialty Breakers 2 Shunt Trip Electrical Rating Data 2 Breaker Type Supply Voltage Minimum VA Breaker Type Supply Voltage Minimum VA E2F/E2FM 48 Vac 33.6 92 E2L/E2LM/E2LW/E2M/ E2MM/E2MW 48 Vac 34 830 Operating Voltage 2 Operating Voltage 60 Vac 1280 60 Vac 140 2 110 Vac 480 110 Vac 120 Vac 570 120 Vac 120 2 127 Vac 640 127 Vac 140 180 48 Vdc 200 60 Vdc 208 Vac 2 220 Vac 2 48 Vdc 146 230 Vac 2 33.
PAGE 480
2.
PAGE 481
2.
PAGE 482
2.
PAGE 483
2.
PAGE 484
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 485
2.
PAGE 486
2.
PAGE 487
2.
PAGE 488
2.
PAGE 489
2.
PAGE 490
2.
PAGE 491
2.6 Molded Case Circuit Breakers Specialty Breakers 2 Accessories 2 Line and Load Terminals 2 2 2 Breaker Type Maximum Breaker Amperes E2F/E2FM Wire Type AWG Wire Range (No.
PAGE 492
2.
PAGE 493
2.
PAGE 494
2.6 Molded Case Circuit Breakers Specialty Breakers Dimensions 2 Approximate Dimensions in Inches (mm) 2 Please see TD01217001E for detailed dimensions. 3 A–150 A 70 A–250 A E2F/E2FM Sealed Breakers with Non-Interchangeable Trip Unit— Include Line/Load Terminals Non-Electronic Trip Units E2J/E2JM Circuit Breakers with Interchangeable Non-Electronic Trip Units A C A 2 2 2 C 2 2 On Off 2 B 2 B ON/ Description 2 OFF/ D Front View 2 2 Side View 2 Dimensions in Inches (mm) A 4.
PAGE 495
2.6 2 2 2 2 Molded Case Circuit Breakers Specialty Breakers Approximate Dimensions in Inches (mm) Please see TD01217001E for detailed dimensions. 100 A–400 A 100 A–400 A E2K/E2KM/E2KW E2KE/E2KEM Circuit Breakers with Interchangeable Electronic Trip Units Circuit Breakers with Interchangeable Non-Electronic Trip Units C A 2 C A 2 2 2 B 2 B ON ON OFF OFF 2 2 2 2 2 2 2 D Front View D Side View Front View Description Dimensions in Inches (mm) Description A 5.49 (139.4) A 5.49 (139.
PAGE 496
2.6 Molded Case Circuit Breakers Specialty Breakers Approximate Dimensions in Inches (mm) 2 Please see TD01217001E for detailed dimensions.
PAGE 497
2.6 2 2 2 2 Molded Case Circuit Breakers Specialty Breakers Approximate Dimensions in Inches (mm) Please see TD01217001E for detailed dimensions.
PAGE 498
2.6 Molded Case Circuit Breakers Specialty Breakers Approximate Dimensions in Inches (mm) 2 Please see TD01217001E for detailed dimensions.
PAGE 499
2.6 2 2 2 2 Molded Case Circuit Breakers Specialty Breakers Approximate Dimensions in Inches (mm) Please see TD01217001E for detailed dimensions. 1600 A–2000 A E2R/ E2RM Circuit Breakers with Electronic Trip Units C A 2 2 2 2 B 2 2 2 2 D 2 2 Front View Description Dimensions in Inches (mm) 2 A 15.50 (393.7) 2 B 16.00 (406.4) C 9.00 (228.6) D 10.00 (254.0) 2 Side View 2 2 2 2 2 2 2 2 2 2 2 2 2 V4-T2-396 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 500
Molded Case Circuit Breakers Specialty Breakers 2.6 Contents E2VAC Mining Vacuum Circuit Breaker Description Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers . . . . . . . . . . . . . . . PVGard Solar Circuit Breakers—600 Vdc Per-Pole and 1000 Vdc Poles-in-Series . . . . . . . . . . . . . . . E2 Mining Service Breakers. . . . . . . . . . . . . . . . . . E2VAC Mining Vacuum Circuit Breaker Catalog Number Selection . . . . . . . . . . . . . . . .
PAGE 501
2.6 Molded Case Circuit Breakers Specialty Breakers 2 Catalog Number Selection 2 E2VAC Mining Vacuum Circuit Breaker E2VAC R 480V 3 400 2 2 Frame Blank = Fixed R = Remote racking 2 2 2 2 2 Voltage 480V = 480 Vac max. 600V = 600 Vac max. 1000V = 1000Y/577 Vac max.
PAGE 502
Molded Case Circuit Breakers Specialty Breakers 2.6 Dimensions 2 Approximate Dimensions in Inches (mm) 2 Fixed Standard E2VAC Breaker 2 34.11 (866.4) 20.00 (508.0) 2 28.00 (711.2) 2 2 2 24.00 (609.6) 2 2 2 1.06 (26.9) 15.00 (381.0) 2 Side View Front View 2 2 1.06 (26.9) 2 0.50 (12.7) 21.50 (546.1) 2 2 22.50 (571.5) 2 2 0.50 (12.7) 2 2 20.12 (511.0) Recommended Cutout 2 2 2 2 2 2 2 2 2 2 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 503
2.6 Molded Case Circuit Breakers Specialty Breakers Contents 2 Description 2 Page Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers . . . . . . . . . . . . . . . PVGard Solar Circuit Breakers—600 Vdc Per-Pole and 1000 Vdc Poles-in-Series . . . . . . . . . . . . . . . E2 Mining Service Breakers . . . . . . . . . . . . . . . . . E2VAC Mining Vacuum Circuit Breaker. . . . . . . . . Classic Mining Breakers Product Selection. . . . . . . . . . . . . . . . . . . . .
PAGE 504
Molded Case Circuit Breakers Specialty Breakers 2.6 Classic Circuit Breakers For Mining Service 2 Undervoltage Release Data Undervoltage releases are calibrated to pick up at 72 to 85% of rated voltage dropout between 35 to 70% of rated voltage. 2 Breaker Type Volts Line Amperes Series Resistors 1 Total VA KAM, HKAM 1 480/60 0.021 10,000 10.1 LAM, HLAM, MAM, HMAM, NBM, HNBM 1 240/60 0.019 — 4.6 120/60 0.021 — 2.5 120/60 2 0.13 — 12,000 2 2 2 2 15.6 3 480/60 0.033 15.
PAGE 505
2.6 2 Molded Case Circuit Breakers Specialty Breakers Product Selection For reference only. Replace these frames with E2 Series. See Cross-Reference information beginning on Page V4-T2-409.
PAGE 506
2.6 Molded Case Circuit Breakers Specialty Breakers For reference only. Replace these frames with E2 Series. See Cross-Reference information beginning on Page V4-T2-409.
PAGE 507
2.
PAGE 508
2.
PAGE 509
2.6 2 2 2 Molded Case Circuit Breakers Specialty Breakers Terminals For Classic Mining Service Breakers Terminals are UL listed for wire type and range listed below. When used with aluminum conductors, use joint compound.
PAGE 510
Molded Case Circuit Breakers Specialty Breakers 2.6 Accessories 2 Classic Mining Circuit Breakers Rear Connected Studs 1 For complete stud assembly, order a stud and tube based on thickness of customer’s mounting panel. A short stud must be assembled adjacent to a long stud to maintain Mounting Panel Thickness In Inches (mm) Stud Length Rear Connected Studs For Insulated Panels Only: Two Per Pole clearances required by Underwriters Laboratories.2 Two studs required per pole.
PAGE 511
2.6 Molded Case Circuit Breakers Specialty Breakers Standard Handle Reset Undervoltage Release For Classic breakers field when voltage drops below mountable on special frames 35 to 70% of coil rating. Picks listed on Page V4-T2-409, or up and seals in at 72 to 85% replacement on breakers of coil rating. For line voltages originally equipped with this up to 250 Vdc or 600 Vac. type UVR. Externally mounted resistors are supplied for certain ratings. For undervoltage protection. Standard leads extend 18.
PAGE 512
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 513
2.
PAGE 514
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 515
2.
PAGE 516
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 517
2.6 2 Molded Case Circuit Breakers Specialty Breakers Contents GFR Relay Description 2 Engine Generator Circuit Breakers . . . . . . . . . . . . Direct Current Circuit Breakers . . . . . . . . . . . . . . . PVGard Solar Circuit Breakers—600 Vdc Per-Pole and 1000 Vdc Poles-in-Series . . . . . . . . . . . . . . . E2 Mining Service Circuit Breakers. . . . . . . . . . . . Classic Mining Breakers . . . . . . . . . . . . . . . . . . . . E2VAC Mining Vacuum Circuit Breaker. . . . . . . . .
PAGE 518
Molded Case Circuit Breakers Specialty Breakers 2.
PAGE 519
2.6 Molded Case Circuit Breakers Specialty Breakers 2 Accessories 2 Options Additional optional equipment can be added to the protection system to meet the requirements of the specifying engineer, including: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 ● ● ● Technical Data and Specifications Ground fault test panel Ground fault warning indicator relay Ground fault indicating ammeter GFR relays are available with zone selective interlocking circuitry to interlock several relays within the same system.
PAGE 520
Molded Case Circuit Breakers Handle Mechanisms 2.7 Contents Handle Mechanisms Description Handle Mechanisms—Series G High-Performance Rotary Handle Mechanisms . . . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . . . . . . Universal Rotary .
PAGE 521
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Description Handle Mechanisms Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms Product Selection . . . . . . . . . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 522
Molded Case Circuit Breakers Handle Mechanisms 2.
PAGE 523
2.
PAGE 524
2.
PAGE 525
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Dimensions Approximate Dimensions in mm (Inches) 2 2 High-Performance Rotary Handle Mechanisms 2 Handle Type 2 Front Operation Direction of Operation Type S01 2 2 2 2 2 Type S2 2 2 2 2 2 2 2 Type S3 2 2 2 2 2 2 Type S4 2 2 2 2 2 2 2 V4-T2-422 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 526
2.7 Molded Case Circuit Breakers Handle Mechanisms Contents Handle Mechanisms Description Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary Product Selection . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . .
PAGE 527
2.7 2 2 Molded Case Circuit Breakers Handle Mechanisms Product Selection Universal Rotary Universal Rotary Through-the-Door Handle Mechanisms 2 Handle Color 2 EG-Frame Black UL Rating 1, 12 2 2 Red 1, 12 2 2 Complete Catalog Number 1 6.00 (152.4) EHMVD06B 12.00 (304.8) EHMVD12B 24.00 (609.6) EHMVD24B 6.00 (152.4) EHMVD06R 12.00 (304.8) EHMVD12R 24.00 (609.6) EHMVD24R JG-Frame Black 2 2 Red 1, 12 1, 12 2 2 6.00 (152.4) FJHMVD06B 12.00 (304.8) FJHMVD12B 24.00 (609.
PAGE 528
Molded Case Circuit Breakers Handle Mechanisms 2.7 Contents Handle Mechanisms Description Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . .
PAGE 529
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Contents Handle Mechanisms Description 2 Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft Product Selection . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 530
Molded Case Circuit Breakers Handle Mechanisms 2.7 Product Selection Note: Type 4X handle mechanisms are available. Add Suffix X to the complete Catalog Number. Flex Shaft Note: When selecting the length of shaft, ensure minimum bending radius of 4 inches (101.6 mm) is maintained to operate properly. 2 Note: The standard method of shipment includes the mechanism preset at the factory; however, minor field adjustments may be required.
PAGE 531
2.7 Molded Case Circuit Breakers Handle Mechanisms 2 Accessories 2 Handle Auxiliary Switch—Early Break Design, 1A–1B Contact for Flex Shaft Type 12 Safety Door Hardware for Flex Shaft (E- through R-Frame) 1 2 Breaker Frame Catalog Number Catalog Number 2 2 EG AUX1EBFSEG C361KJ4 JG AUX1EBFSJG C361KJ6 2 LG AUX1EBFSLG C361KR 2 Auxiliary contact changes state prior to parting of breaker contacts to allow for shutdown of equipment.
PAGE 532
Molded Case Circuit Breakers Handle Mechanisms 2.7 Contents Handle Mechanisms Description Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . . .
PAGE 533
2.7 Molded Case Circuit Breakers Handle Mechanisms Standards and Certifications 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Through-the-Door Handle Mechanisms Eaton’s through-the-door handle mechanisms mount on the front of an enclosure or cabinet door and externally operate the circuit breaker via a variable depth shaft or a linear operator (Type MC). Each rotary type handle mechanism includes a handle, base operating mechanism and shaft that can be cut to various lengths.
PAGE 534
Molded Case Circuit Breakers Handle Mechanisms 2.7 Description Handle Mechanisms Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Product Selection . . . . . . . . . . . . . . . . . . . .
PAGE 535
2.
PAGE 536
2.
PAGE 537
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Dimensions Approximate Dimensions in mm (Inches) 2 2 High-Performance Rotary Handle Mechanisms 2 Handle Type 2 Front Operation Direction of Operation Type S01 2 2 2 2 2 Type S2 2 2 2 2 2 2 2 Type S3 2 2 2 2 2 2 Type S4 2 2 2 2 2 2 2 V4-T2-434 Volume 4—Circuit Protection CA08100005E—August 2015 www.eaton.
PAGE 538
2.7 Molded Case Circuit Breakers Handle Mechanisms Contents Handle Mechanisms Description Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . .
PAGE 539
2.7 Molded Case Circuit Breakers Handle Mechanisms 2 Product Selection 2 Through-the-Door Handle Mechanisms 2 Series C Rotary Series C Rotary Ordering Information Shaft Length Inches (mm) 2 Complete Catalog Number 1 Separate Catalog Number Standard Handle 2 Breaker Mechanism 3 Catalog Number Shaft 4 IEC IP65 56 IEC IP66 56 2 F-Frame 6.00 (152.4) HM1R06 6648C22G25 6648C23G11 4217B37G08 WHM1R06 WHM1R06X 2 12.00 (304.
PAGE 540
2.7 Molded Case Circuit Breakers Handle Mechanisms Contents Handle Mechanisms Description Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary Product Selection . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . .
PAGE 541
2.7 Molded Case Circuit Breakers Handle Mechanisms 2 Product Selection 2 Universal Rotary F-Frame 2 2 Universal Rotary F-Frame Series C Universal Rotary 1 Handle Color Shaft Length in Inches (mm) Complete Catalog Number G-Frame 2 Black 2 Red 2 6.00 (152.4) GHMVD06B 12.00 (304.8) GHMVD12B 6.00 (152.4) GHMVD06R 12.00 (304.8) GHMVD12R F-Frame 2 Black 2 Red 2 2 6.00 (152.4) FHMVD06B 12.00 (304.8) FHMVD12B 6.00 (152.4) FHMVD06R 12.00 (304.8) FHMVD12R 24.00 (609.
PAGE 542
Molded Case Circuit Breakers Handle Mechanisms 2.7 Contents Handle Mechanisms Description Page Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms Flex Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . .
PAGE 543
2.
PAGE 544
Molded Case Circuit Breakers Handle Mechanisms 2.7 Contents Handle Mechanisms Description Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . .
PAGE 545
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Product Selection Approximate Dimensions in Inches (mm) 2 Handle Mechanisms 2 Flex Shaft Flexible Shaft Length in Feet (m) 2 3 (0.9) 4 (1.2) 5 (1.5) 6 (1.8) 7 (2.1) 8 (2.4) 9 (2.7) 10 (3.
PAGE 546
Molded Case Circuit Breakers Handle Mechanisms 2.7 Approximate Dimensions in Inches (mm) 2 2 Handle Only Circuit Breaker Frame Size (Amperes) NEMA Enclosure Type Operating Handle Length Catalog Number 150 1/3R/3/12 4.00 (101.6) C371H1 4/4X 4.00 (101.6) C371H2 1/3R/3/12 6.00 (152.4) C371H3 4/4X 6.00 (152.4) C371H4 1/3R/3/12 4.00 (101.6) C371H5 4/4X 4.00 (101.6) C371H6 1/3R/3/12 6.00 (152.4) C371H7 4/4X 6.00 (152.
PAGE 547
2.7 2 Molded Case Circuit Breakers Handle Mechanisms Contents Handle Extension Description 2 Handle Mechanisms—Series G . . . . . . . . . . . . . . . High-Performance Rotary Handle Mechanisms . Universal Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . . Flex Shaft Handle Mechanisms—Series C High-Performance Rotary Handle Mechanisms . Series C Rotary . . . . . . . . . . . . . . . . . . . . . . . . . Direct (Close-Coupled) Handle Mechanisms . . .
PAGE 548
Power Breakers, Contactors and Fuses Power Breakers, Contactors and Fuses Family 3.1 Power Circuit Breakers Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers. . . . . . . . . Magnum IEC Rated Air Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . .
PAGE 549
3.1 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Contents Power Circuit Breaker Description 3 Page Low Voltage Power Circuit Breakers Features, Benefits and Functions . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 550
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 551
3.
PAGE 552
Power Breakers, Contactors and Fuses Power Circuit Breakers Breaker Internal Features Magnum is designed for ease of access for inspection, modification and maintenance at the point of use. The breaker front cover is easily removed with four captive bolts, revealing the modular internal breaker features.
PAGE 553
3.1 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Contents Magnum DS, MDSX and MDSL Circuit Breakers Description 3 Page Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers Catalog Number Selection . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers .
PAGE 554
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 555
3.
PAGE 556
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 557
3.
PAGE 558
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 559
3.1 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Contents Magnum MDSL Current Limiting Power Circuit Breaker Description 3 Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker Product Selection. . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Trip Curve Charts . . . . . . . . . . . . . . .
PAGE 560
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers Product Selection 3 Magnum MDSL Sensor/Rating Plug vs.
PAGE 561
3.1 3 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Trip Curve Charts Type Magnum DSL Limiters, Peak Let-Through Current Characteristics Type Magnum DSL Limiters Average Melting Time-Current Characteristics 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Available Current, rms Symmetrical Amperes x 10 3 Scale x 100 = Current in Amperes Note For Time/Current Curves, see www.eaton.com/electrical 3 3 3 3 3 3 3 3 3 3 3 3 3 V4-T3-14 Volume 4—Circuit Protection CA08100005E—May 2015 www.eaton.
PAGE 562
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.1 Contents Magnum SB Low Voltage Insulated Case Circuit Breaker Description Page Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers Catalog Number Selection . . . . . . . . . . . . . . . .
PAGE 563
3.
PAGE 564
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 565
3.
PAGE 566
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 567
3.
PAGE 568
3.
PAGE 569
3.
PAGE 570
Power Breakers, Contactors and Fuses Power Circuit Breakers Magnum IEC Double Narrow Frame Drawout Air Circuit Breaker, With Cassette 3.1 Contents Description Page Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers . . . . . . . . . . . . . . . . . .
PAGE 571
3.
PAGE 572
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 573
3.
PAGE 574
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 575
3.
PAGE 576
3.
PAGE 577
3.1 Power Breakers, Contactors and Fuses Power Circuit Breaker 3 Magnum Options and Accessories 3 Breaker-Mounted Options and Accessories Magnum breakers are available with a comprehensive array of factory-installed breaker options to enable configuredto-order solutions for specified customer requirements. Field option kits are available to provide easy service, modification and customization of the breaker at the point of use. 3 3 3 3 3 3 ● 3 3 3 ● 3 3 3 3 3 3 3 3 ● Shunt Trip device (ST).
PAGE 578
3.
PAGE 579
3.1 Power Breakers, Contactors and Fuses Power Circuit Breaker 3 Wiring Diagrams 3 Typical Magnum Breaker Control Circuit 3 3 3 3 3 3 3 3 Legend: LS Limit Switch for Closing Spring MOT Motor for Spring Charging ST Shunt Trip 1 SR Spring Release UVR Undervoltage Release OTS Overcurrent Trip Switch Description of Operation: 1 — Motor is energized through LS contact. 2 — Motor runs and charges closing spring. 3 — When closing spring is fully charged, LS contacts change state.
PAGE 580
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.1 Contents Magnum DC (Direct Current) Low Voltage Switches Description Page Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers Magnum IEC Rated Air Circuit Breakers . . . . . . .
PAGE 581
3.
PAGE 582
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.1 Contents Series NRX Low Voltage Power Circuit Breakers Description NRX Front Connect Page Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers . . . . . . . . . . . . . . . . . . . . . .
PAGE 583
3.
PAGE 584
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 585
3.
PAGE 586
3.
PAGE 587
3.
PAGE 588
3.
PAGE 589
3.1 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Type VCP-W/VCP-T Medium Voltage Vacuum Circuit Breaker Description 3 Low Voltage Power Circuit Breakers . . . . . . . . . . Magnum DS Low Voltage Power Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . Magnum MDSL Current Limiting Power Circuit Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . Magnum SB Low Voltage Insulated Case Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 590
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 591
3.1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Product Selection Please contact your Eaton sales representative for additional product information and to review your specific application and required product configuration.
PAGE 592
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers ANSI Standard Ratings—VCP-W Vacuum Circuit Breaker Types Rated on Symmetrical Current Rating Basis— Extra Capability Breakers 1 3 Circuit Breaker Type 50 VCP-W25C 50 VCP-W40C 50 VCP-W50C 50 VCP-W63C 75 VCP-W50C 150 VCP-W25C 150 VCP-W40C 150 VCP-W50C 150 VCP-W63C 3 Nominal voltage class kV 4.16 4.16 4.16 4.16 7.2 13.8 13.8 13.8 13.
PAGE 593
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers 3 ANSI Standard Ratings—VCP-W Vacuum Circuit Breaker Types Rated on Symmetrical Current Rating Basis— Generator Breakers (to ANSI C37.013) 1 3 Description Circuit Breaker Type 50 VCP-WG50 50 VCP-WG63 50 VCP-WG75 150 VCP-WG50 150 VCP-WG63 150 VCP-WG75 3 Identification Nominal voltage class kV 4.16 4.16 4.16 13.8 13.8 13.
PAGE 594
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers Available Type VCP-W Vacuum Circuit Breakers Rated on Symmetrical Current Basis Per ANSI Standards (Rated K=1) 3 Drawout Circuit Breaker Type Identification 50 VCP-W25 50 VCP-W40 50 VCP-W50 50 VCP-W63 75 VCP-W40 75 VCP-W50 150 VCP-W25 150 VCP-W40 150 VCP-W50 150 VCP-W63 Maximum voltage (V) kV rms 4.76 4.76 4.76 4.76 8.25 8.
PAGE 595
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers 3 Available Type VCP-W Vacuum Circuit Breakers Rated on Symmetrical Current Basis Per ANSI Standards (Rated K=1), continued 3 Identification 50 VCP-W25 50 VCP-W40 50 VCP-W50 50 VCP-W63 75 VCP-W40 75 VCP-W50 150 VCP-W25 150 VCP-W40 150 VCP-W50 150 VCP-W63 Capacitance Current Switching Capability (Reference C37.04a-2003, C37.06-2009 and C37.
PAGE 596
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers VCP-W Vacuum Breaker Types Rated on Symmetrical Current Rating Basis 1 3 Circuit Breaker Type 270 VCP-W750 270 VCP-W1000 270 VCP-W1250 270 VCP-W1600 270 VCP-W2000 270 VCP-W25C 270 VCP-W32C 270 VCP-W40C Identification Nominal voltage class kV 27 27 27 27 27 27 27 27 Nominal three-phase MVA class 750 1000 1250 1600 2000 — — — 27 2 27 2 27 2 27 2 27 2 27 27 27 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.
PAGE 597
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers 3 Type VCP-W Vacuum Circuit Breaker Ratings 3 Type VCP-W Ratings on Symmetrical Current Rating Basis 12 3 3 3 3 3 3 3 Circuit Breaker Type 380 VCP-W 6 and 380 VCP-WR 16 Identification Voltage Nominal voltage class kV rms 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 380 VCP-W 21 and 380 VCP-WR 21 380 VCP-W 40 and 380 VCP-WR 40 34.5 34.5 34.5 34.5 34.5 Maximum voltage V kV rms 38 38 38 38 38 Voltage range factor K 3 1 1 1 1.
PAGE 598
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers Type VCP-WC Vacuum Circuit Breaker Ratings 3 Type VCP-WC Ratings on Symmetrical Current Rating Basis 12 3 Drawout Circuit Breaker Type Identification 380 VCP-W 16C and 380 VCP-WR 16C 380 VCP-W 25C and 380 VCP-WR 25C 380 VCP-W 32C and 380 VCP-WR 32C 380 VCP-W 21C and 380 VCP-WR 21C 380 VCP-W 40C and 380 VCP-WR 40C 34.5 34.5 34.5 34.5 34.
PAGE 599
3.
PAGE 600
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.
PAGE 601
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers 3 3 3 3 3 3 3 3 3 3 ANSI Standard Ratings—VCP-T and VCP-TR Vacuum Circuit Breakers (to ANSI C37.04 and C37.09) Identification Rated Values Circuit Breaker Type Voltage Class Power Frequency Impulse Withstand Continuous Current Short-Circuit 3 Breaking Current Short-Circuit Making Current Mechanical Endurance C–0 kV rms kV rms kV Peak Amperes kA rms kA Peak Operations 4.76 19 60 600 16 42 20,000 4.
PAGE 602
3.1 Power Breakers, Contactors and Fuses Power Circuit Breakers 3 ANSI Standard Ratings—VCP-TL/VCP-TRL Vacuum Circuit Breakers (to ANSI C37.04 and C37.09) Identification Circuit Breaker Type 1 50 VCP-TL16 and 50 VCP-TRL16 Rated Maximum Voltage Insulation Level Power Frequency Impulse Withstand Continuous Current Short-Circuit Breaking Current 2 Short-Circuit Making Current Mechanical Endurance 3 C–O Approx. Weight Fix/Drawout kV rms kV rms kV Peak Amperes kA rms kA Peak Operations Lbs 4.
PAGE 603
3.
PAGE 604
Power Breakers, Contactors and Fuses Power Circuit Breakers 3.1 Dimensions 3 Approximate Dimensions in Inches (mm) 3 3 3 3 3 3 Type VCP-W Circuit Breaker Shown from Rear 3 Mini Module Type VCP-W Circuit Breaker with Deadfront Panel Removed 3 5/15 kV VCPW-ND and VCP-W Power Modules 3 Power Module, 5/15 kV VCPW-ND 26.00 (660.4) Wide, VCP-W 36.00 (914.4) Wide 3 16.62 (422.
PAGE 605
3.1 3 Power Breakers, Contactors and Fuses Power Circuit Breakers Approximate Dimensions in Inches (mm) 3 5/15 kV VCPW-ND and VCP-W Mini Modules 3 5 kV VCPW-ND Mini Module 25.88 (657.4) Wide 3.62 (91.9) 3 30.38 (771.7) 3 3 3 3 Upper C.T. Mounting Plate Breaker Lifting Yoke Opening C.T. Barrier Breaker in Withdrawn Position Contact Fingers 3 3 3 Breaker Front Cover in Test Position Top of Rail Rolling Surface 5/15 kV VCP-W Mini Module 3 5/15 kV VCP-W Mini-Module 35.88 (911.
PAGE 606
Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3.2 Contents Description Catalog Number Selection . . . . . . . . . . . . . . . . . . SL MV Power Contactor 7.2 kV/160–400A . . . . . . SL MV Power Contactor 7.2 kV/800A . . . . . . . . . . SL MV Power Contactor 15 kV/300A . . . . . . . . . .
PAGE 607
3.2 3 3 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Catalog Number Selection Power Contactors SL N 01 2 S 5 A - 22 0 3 3 SL Contactor Series Mechanical Latch 3 Design 3 N = NEMA C = IEC 3 Type 01 = 7.2 kV (160–400A) Contactor 03 = 15 kV (300A) Contactor 04 = 7.2 kV (800A) Contactor 3 3 3 Ampere Rating 3 1 = 160A 2 = 7.2 kV/200A 3 = 7.2 kV/360A, 15 kV/300A 4 = 400A 8 = 800A 3 3 3 Altitude 3 3 3 7.
PAGE 608
Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3.2 Contents SL 7.2 kV/160–400A Medium Voltage Contactor Description Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . SL MV Power Contactor 7.2 kV/160–400A Standards and Certifications . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options and Accessories . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Wiring Diagrams. . . . .
PAGE 609
3.2 3 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors SL Series Features (7.
PAGE 610
Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Standards and Certifications Options and Accessories Global Acceptability ● NEMA ● ANSI ● IEC SL Vacuum Contactor Series—Sizes 7.2 kV/160–400A Accessory Kits Third-Party Verification ● UL ● CSA ● KEMA ● Third-party qualified by UL, CSA, KEMA Mechanical Latch Kit Field Mount to 7.2 kV/160– 400A SL Vacuum Contactor. Coil voltages available in a wide range of AC and DC selections. Easy to install on new and existing units. 3.
PAGE 611
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3 Technical Data and Specifications 3 The SL 400 Contactor Ratings ● Voltages of 2200–7200V ● Amperages from 160 to 400A ● Interrupting ratings as high as 8500A 3 3 3 3 Control Voltages (Field Adjustable) ● 110, 220 Vac, 50 Hz ● 120, 240 Vac, 60 Hz ● 125 Vdc Control Voltage Settings (7.
PAGE 612
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors SL Series Fuses 3 Fuse Application Table for SL Contactors—7.2 kV/160A Fuse Application Table for SL Contactors—7.
PAGE 613
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3 SL Series Ratings 3 Type SL Vacuum Contactor Ratings (7.2 kV/160–400A) 3 Interrupting Rating Rated Utilization Voltage NEMA Unfused (E1) kA Application Table NEMA Fused (E2) kA Induction Motor Horsepower Synchronous Motor Horsepower (0.8 PF) (1.0 PF) Transformer kVA Capacitor kVAR Maximum Insulation Voltage 3 7.2 kV/160A Frame 3 2200–2500 4.5 50 600 600 800 600 480 7200 3000–3600 4.
PAGE 614
Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3.2 Product Specifications 3 7.2 kV/160–400A ● Short-time current: ● 30 seconds: 2400A ● 1 second: 6000A ● 8.7 ms: 63 kA peak (0.5 cycle) ● Normal service altitude: –3281 to +6562 ft (–1000 to +2000m) ● Mechanical life: 2.5 million ● Electrical life: ● 6 x Rated Make/1x Rated Break: 300,000 operations ● 6 x Rated Make/6 x Rated Break: 300,000 operations ● BIL (impulse withstand): 60 kV (1.
PAGE 615
3.2 3 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Dimensions Approximate Dimensions in Inches (mm) 3 Dimensional Drawings 7.2 kV/160–400A 3 Front 3 Rear 4.38 (111.3) 3 14.00 (355.6) 4.38 (111.3) 4.38 (111.3) 4.38 (111.3) Upper Terminals 3 3 Lower Terminals 6.85 (174.0) 3 16.00 (406.4) 3 15.50 (393.7) 15.06 (382.5) 16.00 (406.4) 8.75 (222.2) 3 7.36 (186.9) 3 3 15.25 (387.4) 3 15.25 (387.4) 3 3 16.25 (412.8) 16.25 (412.8) Base Plate Side 0.406 (10.
PAGE 616
Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3.2 Approximate Dimensions in Inches (mm) 3 Lug Terminal 3 3 3 3 3 3 3 Upper Lug Terminal Lug Terminal Width Hardware Diameter De pt Contactor Ampere Rating Width Depth Hardware (Bolt Diameter) 7.2 kV/160 0.75 (19.1) 1.31 (33.3) 10 7.2 kV/200 1.00 (25.4) 1.31 (33.3) 10 7.2 kV/360 1.00 (25.4) 1.31 (33.3) 10 7.2 kV/400 1.00 (25.4) 1.31 (33.
PAGE 617
3.2 3 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Contents SL 7.2 kV/800A Medium Voltage Contactor Description 3 Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . SL MV Power Contactor 7.2 kV/160–400A . . . . . . SL MV Power Contactor 7.2 kV/800A Options and Accessories . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . SL MV Power Contactor 15 kV/300A .
PAGE 618
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Options and Accessories Technical Data and Specifications SL Series—Accessory Options 800A 3 The SL Contactor Ratings ● Voltages of 2200–7200V ● 800A (720A enclosed) ● Interrupting rating of 12,500A 3 Control Voltages ● 110, 220 Vac, 50 Hz ● 120, 240 Vac, 60 Hz ● 125 Vdc 3 3 Dropout Time ● 50–330 ms, field selectable 3 3 Front and Rear View 7.
PAGE 619
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3 SL Series Ratings 3 Type SL Vacuum Contactor Ratings 7.2 kV/SL-800 3 3 3 3 3 Interrupting Rating Rated Utilization Voltage NEMA Unfused (E1) kA Application Table NEMA Fused (E2) kA (0.8 PF) (1.0 PF) Transformer kVA Capacitor kVAR Maximum Insulation Voltage 2200–2500 12.5 (50 MVA) 50 (200 MVA at 2300V) 3000 3000 3500 2500 2400 7200 3000–3600 12.
PAGE 620
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Dimensions 3 Approximate Dimensions in Inches (mm) 3 Dimensional Drawings 7.2 kV/800A Side 3 Top 3.64 (92.5) 4.39 (111.5) 4.39 (111.5) 3 3 3 3 Load Connections 10.25 (260.4) 8.29 (210.6) Line Connections 3 3 3 3.64 (92.5) 3 3 16.25 (412.8) 3 16.15 (410.2) 3 Lug Terminal Front 1.00 (25.4) 3 Line Connections 3 3 Latch Trip Target (when used) 16.86 (428.2) Interlock Width 9.84 (249.
PAGE 621
3.2 3 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Contents SL 15 kV/300A Medium Voltage Contactor Description 3 Page Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . SL MV Power Contactor 7.2 kV/160–400A . . . . . . SL MV Power Contactor 7.2 kV/800A . . . . . . . . . . SL MV Power Contactor 15 kV/300A Options and Accessories . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . .
PAGE 622
3.
PAGE 623
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors 3 SL Series Ratings 3 Type SL Vacuum Contactor Ratings 15 kV/300A 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Interrupting Rating Application Table Synchronous Motor Horsepower Rated Utilization Voltage NEMA Unfused (E1) kA NEMA Fused (E2) kA Induction Motor Horsepower (0.8 PF) (1.
PAGE 624
3.2 Power Breakers, Contactors and Fuses Medium Voltage Power Contactors Dimensions 3 Approximate Dimensions in Inches (mm) 3 Dimensional Drawings 15 kV/300A Front 3 Side 15 kV/300A 16.18 (410.9) 3 4.65 (118.1) Line Terminals 3 3 21.40 (543.4) 3 Intl'k 17.77 (451.4) 3 12.29 (312.1) 8 7 6 5 LATCH COIL Load Terminals 4 3 2 2 AUX POWER 3.50 (88.9) 3 18.58 (471.9) 3 5.60 (142.2) 7.95 (202.0) 15.88 (403.4) 3 3 5.60 (142.2) Front View 3 3 13.25 (336.
PAGE 625
3.3 Power Breakers, Contactors and Fuses Fuses General Contents 3 Description 3 Fuses General 3 3 3 3 3 3 3 3 3 Product Overview 3 Power Fuse 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Power vs. Distribution Eaton’s roots in the medium voltage power fuse business began over 75 years ago under Westinghouse® Electric. In 1935, Westinghouse introduced the medium voltage boric acid expulsion fuse followed by the medium voltage current limiting fuse.
PAGE 626
Power Breakers, Contactors and Fuses Fuses General Expulsion vs. Current Limiting (Definitions per ANSI C47.40-1993) An expulsion fuse is a vented fuse in which the expulsion effect of the gases produced by internal arcing, either alone or aided by other mechanisms, results in current interruption. Backup Fuses A fuse capable of interrupting all currents from the maximum rated interrupting current down to the rated minimum interrupting current.
PAGE 627
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Power Breakers, Contactors and Fuses Fuses General Disconnect Mounting The disconnect mounting allows the fuse unit to be removed (off load) using an insulated hook stick. The hookstick grabs a pull ring and disconnects the fuse unit, which may then be lifted out of its mounting. Dropout Mounting Dropout mountings are used in outdoor applications.
PAGE 628
Power Breakers, Contactors and Fuses Expulsion Fuses 3.4 Contents Description Catalog Number Selection . . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . Page V4-T3-82 V4-T3-83 3 3 3 3 3 3 3 3 3 3 Product Description Eaton’s expulsion fuses use boric acid as the interrupting medium. Under a fault condition, arc heat decomposes the boric acid into water vapor.
PAGE 629
3.4 3 3 3 3 3 3 Power Breakers, Contactors and Fuses Expulsion Fuses Catalog Number Selection Expulsion Fuse Easy to Use, Easy to Order! Eaton’s fuse catalog numbering system makes it easy to order the right fuse. The catalog numbers are easy to remember, unique to each fuse, and are broken down in three descriptive segments: Fuse Type, Voltage Rating and Current Rating.
PAGE 630
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Product Selection Contact Eaton for pricing. 3 Type RBA and RDB 3 Type 8RBA2 Expulsion Fuse Refill Units—8.3 kV Maximum (7.2 kV Nominal) 200A 3 RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 10E 8RBA2-10E 1, 2 — — 1.0 (0.45) 15E 8RBA2-15E 1, 2 — — 1.0 (0.
PAGE 631
3.4 3 3 Power Breakers, Contactors and Fuses Expulsion Fuses Type 8RBA4 Expulsion Fuse Refill Units—8.3 kV Maximum (7.2 kV Nominal) 400A RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 3 0.5 8RBA4-.5 5, 6 — — 2.1 (0.95) 3 8RBA4-3 5, 6 — — 2.1 (0.95) 3 5E 8RBA4-5E 5, 6 — — 2.1 (0.95) 7E 8RBA4-7E 5, 6 — — 2.1 (0.
PAGE 632
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type 8RBA4 Expulsion Fuse Refill Units Used in 8RBA8/8RDB4 Fuseholders— 8.3 kV Maximum (7.
PAGE 633
3.4 3 3 Power Breakers, Contactors and Fuses Expulsion Fuses Type 15RBA2 Expulsion Fuse Refill Units—15.5 kV Maximum (14.4 kV Nominal) 200A RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 3 10E 15RBA2-10E 1, 2 — — 1.1 (0.5) 3 15E 15RBA2-15E 1, 2 — — 1.1 (0.5) 20E 15RBA2-20E 1, 2 15RBT2-20E 3, 4 1.1 (0.
PAGE 634
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type 15RBA4 Expulsion Fuse Refill Units—15.5 kV Maximum (14.4 kV Nominal) 400A 3 RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 0.5 3 5E 7E 10E 15E 20E 25E 30E 40E 50E 65E 80E 100E 125E 150E 200E 250E 300E 400E 15RBA4-.
PAGE 635
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses 3 Type 15RBA4 Expulsion Fuse Refill Units Used in 15RBA8/15RDB4 Fuseholders— 15.5 kV Maximum (14.
PAGE 636
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type 25RBA2 Expulsion Fuse Refill Units—25.5 kV Maximum (23.0 kV Nominal) 200A 3 RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 10E 25RBA2-10E 1, 2 — — 1.3 (0.6) 15E 25RBA2-15E 1, 2 — — 1.3 (0.6) 20E 25RBA2-20E 1, 2 25RBT2-20E 3, 4 1.3 (0.
PAGE 637
3.4 3 3 Power Breakers, Contactors and Fuses Expulsion Fuses Type 25RBA4 Expulsion Fuse Refill Units—25.5 kV Maximum (23.0 kV Nominal) 400A RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 3 0.5 25RBA4-.5 5, 6 — — 2.7 (1.2) 3 25RBA4-3 5, 6 — — 2.7 (1.2) 3 5E 25RBA4-5E 5, 6 — — 2.7 (1.2) 7E 25RBA4-7E 5, 6 — — 2.7 (1.
PAGE 638
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type 25RBA4 Expulsion Fuse Refill Units Used in 25RBA8/15RDB4 Fuseholders— 25.5 kV Maximum (23.
PAGE 639
3.4 3 3 Power Breakers, Contactors and Fuses Expulsion Fuse Type 38RBA2 Expulsion Fuse Refill Units—38.0 kV Maximum (34.5 kV Nominal) 200A RBA/RBT Refill Units Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Ampere Rating Catalog Number Curve Reference 36-635 Catalog Number Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 10E 38RBA2-10E 1, 2 — — 1.4 (0.6) 3 15E 38RBA2-15E 1, 2 — — 1.4 (0.6) 3 20E 38RBA2-20E 1, 2 38RBT2-20E 3, 4 1.4 (0.
PAGE 640
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type 38RBA4 Expulsion Fuse Refill Units—38.0 kV Maximum (34.5 kV Nominal) 400A 3 RBA/RBT Refill Units Ampere Rating Standard Speed (Fuse Refills) Time Lag (Fuse Refills) Catalog Number Catalog Number Curve Reference 36-635 Curve Reference 36-635 Approximate Shipping Weight Lbs (kg) 0.5 38RBA4-.5 5, 6 — — 3.1 (1.4) 3 38RBA4-3 5, 6 — — 3.1 (1.4) 5E 38RBA4-5E 5, 6 — — 3.1 (1.4) 7E 38RBA4-7E 5, 6 — — 3.1 (1.
PAGE 641
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses 3 Type 38RBA4 Expulsion Fuse Refill Units Used in 38RBA8/15RDB4 Fuseholders— 38.0 kV Maximum (34.
PAGE 642
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses Type DBU DBU-EFID 3 Standard Speed DBU17-GNM DBU17-GDM DBU-EFOD 3 Type DBU Expulsion Fuse Units 17.1 kV Maximum, 14.
PAGE 643
3.4 3 DBU-EFID Power Breakers, Contactors and Fuses Expulsion Fuses Type DBU Expulsion Fuse Units 27.
PAGE 644
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses DBU-EFID Type DBU Expulsion Fuse Units 38.8 kV Maximum, 34.
PAGE 645
3.4 Power Breakers, Contactors and Fuses Expulsion Fuses 3 Technical Data and Specifications 3 Type DBA 3 Type DBA Expulsion Fuses for Use Indoors or Outdoors DBA-1 Fuse Units 3 Ampere Rating 3 Type DBA-1 Fuse Refills 8.3 kV Maximum (7.2 kV Nominal) 3 3 3 3 3 3 3 3 Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) 0.5 0.5 8DBA1-.5 10, 11 1.5 (0.7) 3 8DBA1-3 10, 11 1.5 (0.7) 5E 8DBA1-5E 10, 11 1.5 (0.7) 7E 8DBA1-7E 10, 11 1.5 (0.
PAGE 646
Power Breakers, Contactors and Fuses Expulsion Fuses 3.4 Type DBA Expulsion Fuses for Use Indoors or Outdoors, continued DBA-1 Fuse Units Ampere Rating Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) Type DBA-1 Fuse Refills 38 kV Maximum (34.5 kV Nominal) 3 DBA-1 Fuse Units Ampere Rating Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) 3 3 72 kV Maximum (69 kV Nominal) 0.5 38DBA1-.5 10, 12 4.2 (1.9) 3 38DBA1-3 10, 12 4.2 (1.
PAGE 647
3.4 3 3 3 3 Power Breakers, Contactors and Fuses Expulsion Fuses Type DBA Expulsion Fuses for Use Indoors or Outdoors, continued DBA-1 Fuse Units Ampere Rating Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) Type DBA-2 Fuse Refills 38 kV Maximum (34.5 kV Nominal) 38DBA2-.5 10, 12 10 (4.5) 3 3 38DBA2-3 10, 12 10 (4.5) 5E 38DBA2-5E 10, 12 10 (4.5) 3 7E 38DBA2-7E 10, 12 10 (4.5) 10E 38DBA2-10E 10, 12 10 (4.5) 15E 38DBA2-15E 10, 12 10 (4.
PAGE 648
Power Breakers, Contactors and Fuses Expulsion Fuses 3.4 Type DBA Expulsion Fuses for Use Indoors or Outdoors, continued DBA-1 Fuse Units Ampere Rating Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) Type DBA-2 Fuse Refills 92 kV Maximum (92 kV Nominal) 3 DBA-1 Fuse Units Ampere Rating Catalog Number Curve Reference 36-623 Approximate Shipping Weight Lbs (kg) 3 3 145 kV Maximum (138 kV Nominal) 3 92DBA2-3 10, 13 19 (8.6) 5E 92DBA2-5E 10, 13 19 (8.
PAGE 649
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Contents 3 Description 3 Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . Type CLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type BHLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type CLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type CLPT . . .
PAGE 650
Power Breakers, Contactors and Fuses Current Limiting Fuses 3.5 Current Limiting Fuse Accessories 3 15 CLE – P NM – C Maximum kV 2 = 2.4, 2.5, 2.75 4 = 4.3, 4.8 5 = 5.08, 5.5 7 = 7.2 8 = 8.3 15 = 15.5 25 = 25.5 38 = 38.
PAGE 651
3.5 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Product Selection Type CLE 3 Type CLE Current Limiting Fuses 2.75 kV Maximum (2.4 kV Nominal) Performance Curves 3 Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.
PAGE 652
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLE Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal) 3 Performance Curves Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.
PAGE 653
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Type CLE Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal) 3 Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.
PAGE 654
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLE Current Limiting Fuses 15.5 kV Maximum (4.8 kV Nominal) 3 Performance Curves Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.) Heritage Product Indoor/ Outdoor Minimum Melting Time Total Clearing Time Peak Let-Through Current Catalog Number 3 15E 1 31.5 H Indoor 56353204 56353304 63931703 15CLE-15E 20E 1 31.5 H Indoor 56353204 56353304 63931703 15CLE-20E 3 25E 1 31.
PAGE 655
3.5 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type HLE 3 Type HLE Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal) Interrupting Rating 63 (kA rms Sym.
PAGE 656
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type HLE Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal) Interrupting Rating 50 (kA Sym.
PAGE 657
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Type HLE Current Limiting Fuses 15.5 kV Maximum (14.4 kV Nominal) 3 Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.
PAGE 658
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type BHLE 3 Approximate Dimensions in Inches (mm) 3 Type BHLE Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal), Indoor, Bolt-In 3 Length Performance Curves Approximate Shipping Minimum Total Weight Lbs (kg) Melting Time Clearing Time Peak Let-Through Current Catalog Number 3 3 Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.) 10E 1 63 3.00 (76.2) 15.90 (403.9) 8 (3.
PAGE 659
3.5 3 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Approximate Dimensions in Inches (mm) Type BHLE Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal), Indoor, Bolt-In Length Performance Curves Approximate Shipping Minimum Total Weight Lbs (kg) Melting Time Clearing Time Peak Let-Through Current Catalog Number 3.00 (76.2) 15.90 (403.9) 8 (3.63) 70548507 70548607 70548804 8BHLE-10E 3.00 (76.2) 15.90 (403.9) 8 (3.63) 70548507 70548607 70548804 8BHLE-15E 50 3.
PAGE 660
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Approximate Dimensions in Inches (mm) 3 3 Type BHLE Current Limiting Fuses 15.5 kV Maximum (14.4 kV Nominal), Indoor/Outdoor, Bolt-In 3 Performance Curves Current Rating (Amperes) Barrel Number Interrupting Rating rms (kA Sym.) Length Approximate Shipping Minimum Weight Lbs (kg) Melting Time Diameter Total Clearing Time Peak Let-Through Current Catalog Number 10E 1 63 3.00 (76.2) 18.90 (480.1) 10 (4.
PAGE 661
3.5 3 3 3 3 3 3 3 3 3 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type HCL Type HCL Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal), Indoor Current Rating (Amperes) Interrupting Barrel Rating rms Number (kA Sym.) Diameter Clip Center Approximate Shipping Mounting Weight Lbs (kg) Type Live Parts Performance Curves (Includes End Fittings) Minimum Total Peak Let-Through Catalog Number Melting Time Clearing Time Current Catalog Number 10E 1 63 3.00 (76.2) Clip-lock 9 (4.
PAGE 662
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Fuse Dimensional Details Approximate Dimensions in Inches (mm) Ampere Rating Figure Number A B C Indicator Flush with Surface in Untripped Position Interrupting Rating rms (kA Sym.) A C 5.5 kV Maximum—Clip Lock Style—15.25-Inch (387.4 mm) Clip Centers—3.00-Inch (76.2 mm) Barrel Diameter 10E–150E 1 A 16.81 (427.0) 1 16.12 (409.4) 4.31 (109.5) 63 1 A 22.81 (579.4) 1 22.12 (561.8) Ampere Rating Figure Number C 7.94 (201.
PAGE 663
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Type CLS 3 Type CLS Current Limiting Fuses 3 Maximum Current Interrupting Design Rating “R” Barrel Rating rms Clip Voltage (kV) (Amperes) Designation Number (kA Sym.) Diameter Center Length 2.54 3 Performance Curves Approximate Shipping Minimum Weight Lbs (kg) Melting Time Peak Total Let-Through Catalog Clearing Time Current Number 25 — 1 50 3.00 (76.2) 7.00 (177.8) 10.80 (274.3) 7 (3.
PAGE 664
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLS Current Limiting Fuses, continued 3 Performance Curves Maximum Current Interrupting Design Rating “R” Barrel Rating rms Clip Voltage (kV) (Amperes) Designation Number (kA Sym.) Diameter Center 5.08 Length Approximate Minimum Shipping Weight Lbs (kg) Melting Time Peak Total Let-Through Catalog Clearing Time Current Number 30 — 1 50 3.00 (76.2) 12.00 (304.8) 15.90 (403.9) 8 (3.
PAGE 665
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Type CLS Current Limiting Fuses, continued 3 Maximum Current Interrupting Design Rating “R” Barrel Rating rms Clip Voltage (kV) (Amperes) Designation Number (kA Sym.) Diameter Center 3 Performance Curves 5.08 Length Approximate Shipping Minimum Weight Lbs (kg) Melting Time Peak Total Let-Through Catalog Clearing Time Current Number 70 2R 2 50 3.00 (76.2) Not applicable 15.90 (403.9) 20 (9.
PAGE 666
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLS Current Limiting Fuses, continued 3 Performance Curves Maximum Current Interrupting Design Rating “R” Barrel Rating rms Clip Voltage (kV) (Amperes) Designation Number (kA Sym.) Diameter Center 7.2 8.3 Length Approximate Shipping Minimum Weight Lbs (kg) Melting Time Peak Total Let-Through Catalog Clearing Time Current Number 200 9R 1 50 3.00 (76.2) Not applicable 15.90 (403.9) 8 (3.
PAGE 667
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Fuse Dimensional Details Approximate Dimensions in Inches (mm) 3 Type CLS Fuse 3 3 3.31 Ref. (84.1) 3 3 10.81 (274.6) 0.06 for 2CLS 15.85 (402.6) 0.06 for 5, 7 & 8CLS 3 3.00 Dia. Ref. (76.2) 3 3 10.81 (274.6) 0.06 for 2CLS 15.85 (402.6) 0.06 for 5, 7 & 8CLS 3 Type BCLS Fuse 3 0.455 (11.6) Dia. x 0.91 Slot (4) 3 2.12 (53.8) 3 3 3.00 (76.2) Ref. 3 17.88 (454.2) 17.88 0.06 (454.2) 19.25 (488.9) 19.25 Ref. (488.
PAGE 668
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLS Mountings and Hardware Mounting (Including Live Parts, End Fittings) 1 Live Parts (Including End Fittings) End Fittings (Disconnect Only) 1 Maximum Design Voltage (kV) Ampere Rating Fuse Mounting Type Voltage BIL (kV) Porcelain Insulator Glass-Polyester Insulator Catalog Number Catalog Number Catalog Number Catalog Number 2.
PAGE 669
3.5 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLPT Indicating 3 Type CLPT Current Limiting Fuses 2.475 kV Maximum (2.4 kV Nominal) Performance Curves Current Rating (Amperes) Interrupting Rating rms (kA Sym.) Diameter Clip Center Length Approximate Shipping Weight Lbs (kg) 3 0.25E 63 0.81 (20.6) — 4.50 (114.3) 0.25 (0.11) 56357202 59883702 63933702 2NCLPT-.25E 0.5E 63 0.81 (20.6) — 4.50 (114.3) 0.25 (0.11) 56357202 59883702 63933702 2NCLPT-.
PAGE 670
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLPT Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal) 3 Performance Curves Current Rating (Amperes) Non-Indicating Indicating Interrupting Rating rms (kA Sym.) Diameter Clip Center Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak LetThrough Current Catalog Number Non-Indicating 3 3 3 0.5E 63 0.81 (20.6) — 5.63 (143.0) 0.25 (0.11) 66702402 66702502 66704101 5NCLPT-.
PAGE 671
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses 3 Type CLPT Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal) 3 Current Rating (Amperes) 3 Performance Curves Non-Indicating 3 Interrupting Rating rms (kA Sym.) Diameter Clip Center Length Approximate Shipping Weight Lbs (kg) 0.81 (20.6) — 8.00 (203.2) 0.25 (0.11) Minimum Melting Time Total Clearing Time Peak LetThrough Current Catalog Number 56357206 59883706 63933704 8NCLPT-2E Non-Indicating 2E 25 4E 25 0.
PAGE 672
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLPT Current Limiting Fuses 15.5 kV Maximum (7.2 kV Nominal) 3 Performance Curves Current Rating (Amperes) Non-Indicating Interrupting Rating rms (kA Sym.) Diameter Clip Center Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak LetThrough Current Catalog Number Non-Indicating 0.5E 63 1.60 (40.6) 11.50 (292.1) 12.90 (327.7) 1.6 (0.73) 70548303 70548403 63934002 15NCLPT-.
PAGE 673
3.5 3 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CLPT Current Limiting Fuses 25.5 kV Maximum (23.0 kV Nominal) Current Rating (Amperes) Interrupting Rating rms (kA Sym.) 0.5E 1E Performance Curves Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak Let-Through Current Catalog Number 16.10 (408.9) 17.60 (447.0) 2 (0.91) 56353208 56353308 63933901 25CLPT-.5E 16.10 (408.9) 17.60 (447.0) 2 (0.
PAGE 674
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CX Type CX 3 3 Type CX Current Limiting Fuses 4.3 kV Maximum (2.4 kV Nominal) Current Interrupting Fuse Rating Barrel Rating rms Mounting (Amperes) Number (kA Sym.) Code Diameter 3 Length Approximate Performance Curves Minimum Total Shipping Melting Clearing Weight Time Time Lbs (kg) Peak Let-Through Current I2t Catalog Number Non-Indicating 18C 1 50 G 1.13 (28.7) 10.00 (254.0) 1 (0.
PAGE 675
3.5 3 Type CX 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CX Current Limiting Fuses 5.5 kV Maximum (4.8 kV Nominal) Current Interrupting Fuse Rating Barrel Rating rms Mounting (Amperes) Number (kA Sym.) Code Diameter 3 Performance Curves Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak Let-Through Current I2t Catalog Number Non-Indicating 3 10C 1 50 G 1.13 (28.7) 10.00 (254.0) 1 (0.
PAGE 676
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CX Type CX Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal) Current Interrupting Fuse Rating Barrel Rating rms Mounting (Amperes) Number (kA Sym.) Code Diameter 3 Performance Curves Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak Let-Through Current I2t Catalog Number Non-Indicating 3.5C 1 50 G 1.13 (28.7) 10.00 (254.0) 2 (0.
PAGE 677
3.5 3 Type CX 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CX Current Limiting Fuses 15.5 kV Maximum (14.4 kV Nominal) Current Interrupting Fuse Rating Barrel Rating rms Mounting (Amperes) Number (kA Sym.) Code Diameter 3 Performance Curves Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak Let-Through Current I2t Catalog Number Non-Indicating 3 4C 1 50 G 2.00 (50.8) 14.30 (363.2) 2 (0.
PAGE 678
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CXN Type CXN 3 3 Type CXN Current Limiting Fuses 8.3 kV Maximum (7.2 kV Nominal) 3 Length Approximate Shipping Weight Lbs (kg) Performance Curves Minimum Melting Time Total Clearing Time Peak Let-Through Current Catalog Number 3 18.80 (477.5) 8 (3.63) 66675102 66675202 66664902 8CXN-60C 3.00 (76.2) 18.80 (477.5) 8 (3.63) 66675102 66675202 66664902 8CXN-100C 3 50 4.00 (101.6) 18.80 (477.5) 14 (6.
PAGE 679
3.5 3 Type CXN Power Breakers, Contactors and Fuses Current Limiting Fuses Type CXN Current Limiting Fuses 15.5 kV Maximum (14.4 kV Nominal) Performance Curves Length Approximate Shipping Weight Lbs (kg) Minimum Melting Time Total Clearing Time Peak Let-Through Current Catalog Number 3.00 (76.2) 18.80 (477.5) 8 (3.63) 66674802 66675002 66665002 15CXN-45C 3.00 (76.2) 18.80 (477.5) 8 (3.63) 66674802 66675002 66665002 15CXN-60C 50 4.00 (101.6) 18.80 (477.5) 14 (6.
PAGE 680
3.5 Power Breakers, Contactors and Fuses Current Limiting Fuses Type CXF 3 3 Type CXF Indicated Full-Range Current-Limiting Fuses Mountings and Hardware Maximum Design Voltage (kV) 5.5 10 8.3 17.2 15.
PAGE 681
3.5 3 3 Power Breakers, Contactors and Fuses Current Limiting Fuses Type DSL 6DSL-B1600 3 Type DSL Low Voltage Current Limiting Fuse Interrupting Rating rms (kA Sym.) Application Data (Time Current Curves) Approximate Ship Wt. Lbs (kg) Catalog Number 200 33–792 (2) 3.00 (1.4) 6DSL-A150 200 33–792 (2) 3.00 (1.4) 6DSL-A200 200 33–792 (2) 3.00 (1.4) 6DSL-A250 3 200 33–792 (2) 3.00 (1.4) 6DSL-A300 3 200 33–792 (2) 3.00 (1.4) 6DSL-A400 200 33–792 (2) 3.00 (1.
PAGE 682
Power Breakers, Contactors and Fuses Current Limiting Fuses 3.5 Typical Fuse Mounting for Current Limiting Fuses Single Barrel Disconnect with 2.00-Inch (50.8 mm) Diameter CLE Fuses Non-Disconnect (CX) Double-Barrel NonDisconnect All 2.00-Inch (50.8 mm) and 3.00-Inch (76.2 mm) Diameter CL Fuses 3 Non-Disconnect (15CXN-GNM-F and 15CXNGNM-D) 3 3 3 3 3 3 3 3 Single Barrel Disconnect All 3.00-Inch (76.
PAGE 683
Appendix 1—Eaton Terms & Conditions Effective Date: November 1, 2008 Contents Eaton Terms & Conditions Description Page Terms and Conditions of Sale. . . . . . . . . . . . . . . . . Terms of Payment . . . . . . . . . . . . . . . . . . . . . . . . . Freight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 684
Appendix 1—Eaton Terms & Conditions Effective Date: November 1, 2008 Prices All prices are subject to change without notice. In the event of a price change, the effective date of the change will be the date of the new price or discount sheet, letter or telegram. All quotations made or orders accepted after the effective date will be on the new basis. For existing orders, the price of the unshipped portion of an order will be the price in effect at time of shipment.
PAGE 685
Appendix 1—Eaton Terms & Conditions Effective Date: November 1, 2008 Freight Warranty Freight policy will be listed on the Product discount sheets, or at option of Seller one of the following freight terms will be quoted. Risk of Loss Risk of loss or damage to the Products shall pass to Buyer at the F.O.B. point. F.O.B.—P/S—Frt./Ppd. and Invoiced Products are sold F.O.B. point of shipment freight prepaid and invoiced to the Buyer. Concealed Damage Except in the event of F.O.B.
PAGE 686
Appendix 1—Eaton Terms & Conditions Effective Date: November 1, 2008 Extended Warranty for Products If requested by the Buyer and specifically accepted in writing by Seller, the foregoing standard warranty for Products will be extended from the date of shipment for the period and price indicated below: ● ● ● 24 months—2% of Contract Price 30 months—3% of Contract Price 36 months—4% of Contract Price Special Warranty (In and Out) for Products If requested by the Buyer and specifically accepted in writin
PAGE 687
Appendix 1—Eaton Terms & Conditions Effective Date: November 1, 2008 Returning Products Authorization and shipping instructions for the return of any Products must be obtained from Seller before returning the Products. When return is occasioned due to Seller error, full credit including all transportation charges will be allowed.
PAGE 688
Appendix 2—Catalog Parent Number Index A AAL . . . . . . . . . . . AA1 . . . . . . . . . . . AA11 . . . . . . . . . . AA21 . . . . . . . . . . AA31 . . . . . . . . . . ALM . . . . . . . . . . AUX . . . . . . . . . . . A1L . . . . . . . . . . . A1X . . . . . . . . . . . A2L . . . . . . . . . . . A2X . . . . . . . . . . . A3X . . . . . . . . . . . A4X . . . . . . . . . . .
PAGE 689
Appendix 2—Catalog Parent Number Index FAZ-XAA . . . . . . . FAZ-XUA . . . . . . . FAZ-Z . . . . . . . . . . FCWT . . . . . . . . . FD . . . . . . . . . . . . FDC . . . . . . . . . . . FDE . . . . . . . . . . . FDMP . . . . . . . . . FDPV . . . . . . . . . . FD1 . . . . . . . . . . . FD2 . . . . . . . . . . . FD3 . . . . . . . . . . . FD4 . . . . . . . . . . . FG . . . . . . . . . . . . FHMV . . . . . . . . . FJC . . . . . . . . . . . FJH . . . . . . . . . . . FJI . . . . . . . . . . . . FJP . . . . . . . .
PAGE 690
Appendix 2—Catalog Parent Number Index JKDN . . . . . . . . . . JLDN . . . . . . . . . . JNDN. . . . . . . . . . JT . . . . . . . . . . . . JT2 . . . . . . . . . . . JT3 . . . . . . . . . . . JT4 . . . . . . . . . . . V4-T2-344 V4-T2-344 V4-T2-344 V4-T2-154 V4-T2-35 V4-T2-35, V4-T2-36, V4-T2-350, V4-T2-351 V4-T2-35, V4-T2-36 LRC . . . . . . . . . . LST. . . . . . . . . . . LT. . . . . . . . . . . . LTS. . . . . . . . . . . LT3. . . . . . . . . . . LT4. . . . . . . . . . . L3R . . . . . . . . . . L4R . . .
PAGE 691
Appendix 2—Catalog Parent Number Index Q QBAF. . . . . . . . . . QBCAF . . . . . . . . QBGF. . . . . . . . . . QBH. . . . . . . . . . . QC . . . . . . . . . . . . QCD. . . . . . . . . . . QCF . . . . . . . . . . . QCG. . . . . . . . . . . QCH. . . . . . . . . . . QCHW . . . . . . . . . QCR. . . . . . . . . . . QHCW . . . . . . . . . QHCX . . . . . . . . . QHP. . . . . . . . . . . QL . . . . . . . . . . . . QPGF. . . . . . . . . . QPH. . . . . . . . . . . QPHG . . . . . . . . . STK2 . . . . . . . . .
PAGE 692
Appendix 2—Catalog Parent Number Index WHM. . . . . . . . . . V4-T2-436 Z Z-EB. . . . . . . . . . . Z-EK. . . . . . . . . . . ZGK . . . . . . . . . . . ZGPK . . . . . . . . . . Z-NH . . . . . . . . . . Z-SV. . . . . . . . . . . ZV-BS . . . . . . . . . V4-T1-55 V4-T1-55 V4-T2-292 V4-T2-292 V4-T1-55, V4-T1-89, V4-T1-95 V4-T1-55 V4-T1-55 Numerics 05B7 . . . . . . . . . . 1223 . . . . . . . . . . 1225 . . . . . . . . . . 1227 . . . . . . . . . . 1228 . . . . . . . . . . 1229 . . . . . . . . . . 1231 . . . .
PAGE 693
Appendix 2—Catalog Parent Number Index 4CXI. . . . . . . . . . . 4TA . . . . . . . . . . . 4TA4 . . . . . . . . . . 4TA6 . . . . . . . . . . 4T4 . . . . . . . . . . . 4T40 . . . . . . . . . . 4T6 . . . . . . . . . . . 4210 . . . . . . . . . . 4212 . . . . . . . . . . 4217 . . . . . . . . . . 4218 . . . . . . . . . . 451D . . . . . . . . . . 456D . . . . . . . . . . 4995 . . . . . . . . . . 5ACLS . . . . . . . . . 5AHLE . . . . . . . . . 5BCLS . . . . . . . . . 5BHCL . . . . . . . . . 5BHLE . . . . . . . . .
PAGE 694
Appendix 3—Alphabetical Product Index A Accessories Expulsion Fuses End Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T3-81 Live Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T3-81 Mountings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T3-81 Industrial Circuit Breakers, QUICKLAG . . . . . . . . . . . . V4-T1-27 Dummy Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T1-45 Factory Modifications . . . . . . . . . .
PAGE 695
Appendix 3—Alphabetical Product Index Imperial Base Mounting Hardware. . . . . . . . . . . . . V4-T2-363 Interphase Barrier . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-363 Metric Base Mounting Hardware . . . . . . . . . . . . . . V4-T2-363 Non-Padlockable Handle Block . . . . . . . . . . . . . . . . V4-T2-363 Padlockable Handle Lock Hasp . . . . . . . . . . . . . . . V4-T2-363 PVGard Solar Circuit Breaker Terminal . . . . . . . . . . V4-T2-365 Shunt Trip . . . . . . . . . . . . . . . . . . . .
PAGE 696
Appendix 3—Alphabetical Product Index Type CLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type CX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type CXF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type CXN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type HLE . . . . . . . . . . . .
PAGE 697
Appendix 3—Alphabetical Product Index End Cap Accessory Kit Molded Case Circuit Breakers, Definite Purpose Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-333 End Cap Terminals Molded Case Circuit Breakers, Speciality Breakers, E2 Mining Service Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-388 End Fittings Expulsion Fuses Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 698
Appendix 3—Alphabetical Product Index Handle Mechanisms—Series G Molded Case Circuit Breakers . . . . . . . . . . . . . . . . V4-T2-418 I Imperial Base Mounting Hardware Molded Case Circuit Breakers, Speciality Breakers, PVGard Solar Circuit Breakers Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-363 Industrial Circuit Breakers, QUICKLAG Accessories. . . . . . . . . . . . . . . . . . . . . . . . . V4-T1-27, V4-T1-43 Bolt-On . . . . . . . . . . . . . . . . . . . .
PAGE 699
Appendix 3—Alphabetical Product Index Metric Base Mounting Hardware Molded Case Circuit Breakers, Speciality Breakers, PVGard Solar Circuit Breakers Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-363 M-Frame (300–800 Amperes) Molded Case Circuit Breakers, Series C . . . . . . . . . . V4-T2-210 Miniature Circuit Breakers and Supplementary Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T1-1–V4-T1-98 Industrial Circuit Breakers QUICKLAG . . . . . . . .
PAGE 700
Appendix 3—Alphabetical Product Index PM3 Monitoring and Metering Module Molded Case Circuit Breakers, Metering and Communications . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-337 Potential Transformer Module Molded Case Circuit Breakers, Series C, External Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-323 Power Breakers, Contactors & Fuses . . . . . . . . . V4-T3-1–V4-T3-135 Current Limiting Fuses . . . . . . . . . . . . . . V4-T3-102–V4-T3-135 Type BHLE . . . .
PAGE 701
Appendix 3—Alphabetical Product Index Series C Rotary Accessories Molded Case Circuit Breakers, Series C, External Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-325 Series G Molded Case Circuit Breakers. . . . . . . . . . . V4-T2-4–V4-T2-115 Current Limiting Circuit Breaker Module . . . . . . . . . V4-T2-96 Drawout Cassette . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-115 EG-Frame (15–125 Amperes) . . . . . . . . . . . . . . . . . .
PAGE 702
Appendix 3—Alphabetical Product Index Test Panel Molded Case Circuit Breakers, Add-On Ground Fault Protection Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V4-T2-416 Type BHLE Current Limiting Fuses Power Breakers, Contactors & Fuses . . . . . . . . . . V4-T3-111 Type CLE Current Limiting Fuses Power Breakers, Contactors & Fuses . . . . . . . . . . V4-T3-104 Type CLPT Current Limiting Fuses Power Breakers, Contactors & Fuses . . . . . . . . . .