Installation guide

Pre-Installation Preparation and Planning
Unpack the Box Contents
Before you begin the installation and assembly process, ensure that the following parts are included
in your shipment. Refer to the illustration on the next page for a diagram of all system components
included in the PROKIT46 assembly (60” x 60” workstation). If any parts are missing, then contact
Technical Support at [e-mail]
.
Item Part Qty Part Number
Profile Dual Genesys Lift (varies based on model) 1 See P/Ns List
1 Base, Grommet 2 94174
2 Top, Grommet 2 94175
3 Screw #8-32 x 3/8” Flathead Thread Cutting 15 18618
4 Washer, Lock, Helical 24 18950
5 Screw, ¼-20x1/2 Hex Washer HD 8 54348
6 Hole Plug, 1.5” 1 60906
7 Screw, #10A x 1.00 Phillips Pan Head 49 62071
8 Screw, Pan Head Thread Form 38 66714
9 Leveler 10 68435
10 Washer – 3/8” W Series 2 82785
11 Screw, ¼-20 x ½” Phillips Pan Head 2 83105
12 Screw M6 x 20MM Phillips Pan Head 8 85234
13 AC Power Cord 3m 1 89630
14 Motor Control Cable, 1000mm (39”) 2 89631
15 LINAK CBD4 – 3 Lift, 120Vac 1 90066
16 Motor Control Cable, 2000mm (78”) 1 90071
17 Screw – M6 x 10MM Phillips Pan Head 8 91503
18 LINAK, DL6 Desklift, 1200N (270 lb) 2 96241
19 Motor Control, Extension Cable 1 96779
20 E-Chain, 41 Links 2 97352
21 E-Chain, 53 Links 1 97362
22 Screw, Phillips Pan Head 10 97408
23 Screw, Philip Pan Head 4 97409
24 Bushing – Heyco Snap 2 97492
25 Bolt, Hex Head, 3/8-16 x 2.5 2 98129
26 Label – Eaton Profile 1 98137
27 Top Cap Compass Foot 2 17706X
28 WLD, Beam Support 1 20040X
29 WLD, Base 1 20041X
30 WLD, Foot, DL6 2 20107X
31 WLD, Frame, User Deck 1 Varies
32 WLD, Lower Frame 1 Varies
33 Bracket, Cable Chain Mounting 1 20546X
34 End Cap 2 1554X
35 Plastic Cover 1 20756X
36 Base Support Cover 1 20042X
37 Flat Panel Display Deck Workstation 1 Varies
38 Bracket, 17 Power Strip Mount 1 21355X
39 Toe Cap – Next Generation 4 21356X
40 Assembly, LINAK, DL2 1 22118X
41 Plastic Cover 1 22650X
42 Front Cover, Rear Surface 1 21614X
43 Side Cover, Rear Surface 2 21615X
44 Rear Cover, Rear Surface 1 21616X
45 Cover, Leg, Right 1 Varies
46 Cover, Leg, Left 1 Varies
47 Attachment Bracket, Right 1 22156X
48 Attachment Bracket, Left 1 22157X
49 Workstation, 90-48x42x48, User Surface 1 Varies
50 Screw supplied with DL2 by LINAK 8 N/A
wwww.eaton.com/powerquality 11-41 06-2011 Eaton Profile Genesys Dual-Lift Ergonomic Workstation Installation 6