Cut Sheet
Table Of Contents
January 2008
CA08101001E For more information visit: www.eaton.com
3-75
Loadcenters & Circuit Breakers
3
Type BR Loadcenters & Circuit Breakers
Circuit Breaker Accessories
Circuit Breaker Accessories
Table 3-124. Field Installation Kits and Parts
Must be purchased in multiples of ordering quantities indicated.
Handle Ties: Typically used to join two similar independent single-pole breakers to form a 2-pole noncommon trip breaker.
Handle Lockoffs: Devices that use a padlock to lock the circuit breaker’s handle in the “On” or “Off” position.
See Table 3-126 for Handle Position Changeability Chart.
Escutcheon Mounted: Device mounted semipermanently to the face of the circuit breaker and secured by the loadcenter deadfront.
Handle Mounted: Device mounted directly to the handle by the use of a set screw.
Screw Mounted: Device permanently mounted to the face of the circuit breaker by the use of a non-removable screw.
Handle Lockdogs: Devices that are used to secure a circuit breaker’s handle in the “On” or “Off” position. Handle Lockdogs are not padlockable devices.
Hold-Down Kits: Devices used to secure the circuit breaker to the loadcenter for back-feed main application. See NEC Article 384-16(g).
Description Ordering
Quantity
Catalog
Number
Price U.S. $
Each
Handle Ties
Handle tie bar for physically joining the handles of two adjacent 1-pole Type BR Circuit Breakers.
(Metal Cylinder Pin Type)
Handle tie bar for joining two independent outside poles of Types BQ and BQC Quadplex and
outside poles of two Type BD Duplex Circuit Breakers.
Handle tie bar for joining two adjacent outside poles of Types BQ and BQC Quadplex and
outside poles of two Type BD Duplex Circuit Breakers.
10
10
10
BHT
THOW
THS1
Handle Lockoffs
Padlockable device for locking the handle of 1-, 2- or 3-pole Type BR Circuit Breakers and 1-pole of a Type BD Duplex
or one independent outside pole of a Type BQ or BQC Quadplex Circuit Breakers. (Escutcheon Mounted)
Padlockable device for locking the handle of a 1-pole Type BR Circuit Breaker. (Handle Mounted)
Padlockable device for locking the handle of a 2- and 3-pole Type BR Circuit Breaker. (Handle Mounted)
Padlockable device for locking the handle of a 1-pole Type BD Duplex, BQ or BQC Quadplex Breaker.
(Handle Mounted)
Padlockable device for locking the handle of the two center poles and the two outer poles of a 2-pole Types BQ and BQC
Quadplex Circuit Breakers. (Escutcheon Mounted)
Padlockable device for locking the handle of main circuit breaker Types CC and CHH
into the ON or OFF position. (Screw Mounted)
Padlockable device for locking the handle of main breaker Types BW and BWH
into the ON or OFF position. (Escutcheon Mounted)
10
10
10
10
10
1
1
BRLW
BRLW1
BRLW2
BRDL1
BRQLW
CCPL
MCBPL
Handle Lockdogs
Device used to secure handle in ON or OFF position for 1-, 2- or 3-pole Type BR Circuit Breakers
and 1-pole of Type BD Duplex and one independent outside pole of Type BQ or BQC Quadplex Circuit Breakers.
(Escutcheon Mounted)
Device used to secure handle in ON or OFF position for 1-pole Type BR Circuit Breakers. (Handle Mounted)
Device used to secure handle in ON or OFF position for 2- and 3-pole Type BR Circuit Breakers. (Handle Mounted)
Device used to secure handle in ON or OFF position for 1-pole Type GFCB
Ground Fault Circuit Breakers. (Handle Mounted)
Device used to secure handle in ON or OFF position for one independent outside pole
of Types BQ and BQC Quadplex or 1-pole Type BD Duplex Circuit Breakers. (Handle Mounted)
10
10
10
10
10
BHLW
BHLW1
BHLW2
BHGW
HLW1
Hold-Down Kits
Hold-down retainer kit for 3-pole Type BR Circuit Breakers in S3100 and 3100R Loadcenters only.
Hold-down screw kit for 2-pole Type BR Circuit Breakers in 1-phase MLO Loadcenters through 125 amperes.
Hold-down screw kit for 2-pole Type BR Circuit Breakers in MLO Loadcenters 150 through 225 amperes (1-phase only).
Hold-down screw kit for 2-pole Types BJ and BJH Circuit Breakers in MLO Loadcenters 125 through 225 amperes.
Hold-down screw kit for 3-pole Types BJ and BJH Circuit Breakers in MLO Loadcenters 125 through 225 amperes.
1
1
1
1
1
BRHDB
BREQS125
BRHDK125
BJHDS
BJHDS3P
Main Breaker Lug Kits
Types CC and CHH Main Breaker Lug Kit (2) 300 kcmil.
Types BW/BWH Main Breaker Lug Kit (2) 300 kcmil.
1
1
CCL300
MCBL300
Mechanical Interlocks
Types BR for 2-, 3- and 4-pole breakers. 10 BRML
BREQS125
BHLW2
THS1
BRLW2
BHLW
BRQLW
BRHDK125
THOW (Installed) MCBPL (Installed)
BRML
Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . 22CD