Datasheet
DATASHEET - IKA-1/8-ST
IKA professional distribution board, IP65 + clamps
Part no. IKA-1/8-ST
Catalog No. 174196
Eaton Catalog No. IKA-1/8-ST
EL-Nummer
(Norway)
1702930
Delivery program
Basic function Basic device
Product function Installation distribution boards
Product range IKA professional DBO
Design Surface mounted
Installation site Indoor
Type of installation Surface mounting
Door/Flap Transparent
Degree of Protection IP65
Colour Grey
Module rack Single-rail
Shroud for protection against accidental contact Plastic
Rows Count 1
Module units per row 8
Description IP65
Protection Class II
Plastic enclosure gray (RAL 7035)
Cable entries Metric cable entries on top and bottom, back plate
PE and N terminals design Screw terminals
PE and N terminals Number
x cross-
sectional area
mm
2
PE: 4 x (2.5 - 6) + 4 x (4 - 10) + 1 x (16 - 35)
N: 4 x (2.5 - 6) + 4 x (4 - 10) + 1 x (16 - 35)
Equipment supplied Basic device
Device support rails
Neutral-/protective conductor terminal
Locking screws can be sealed
Sealing caps
Current circuit designation
Technical data
General
Standards EN 62208, IEC/EN 60670-24
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and
Council)
conform
Ambient temperature °C -25 - +40
Degree of Protection IP65
Protection class II (totally insulated)
Rated operational voltage Ue V AC 415
Rated frequency f Hz 50
Material characteristics
Material ABS (plastic)
Colour Gray (RAL 7035)
Material properties
Mechanical
Impact resistance IK08
Design verification as per IEC/EN 61439
Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees,
calculated as per IEC 60890
Individual enclosure for wall mounting P
V
CO 14
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees,
calculated as per IEC 60890
05/22/2018 Eaton 174196 ED2018 V44.0 EN 1 / 4