Datasheet

ManualsBrandsEaton ManualsAutomationLimit Switch, Round Plunger, Plastic, 1NO/1NC, Slow-Action

DATASHEET - LS-11A

Position switch, 1N/O+1N/C, rounded plunger, 1mm/3mm

Part no. LS-11A

Catalog No. 116704

Eaton Catalog No. LS-11A

EL-Nummer

(Norway)

0004315227

Delivery program

Basic function   Position switches

Safety position switches

Part group reference   LS(M)-…

Product range   Rounded plunger

Degree of Protection   IP66, IP67

Features   Basic device, expandable

Ambient temperature  °C -25 - +70

Design   EN 50047 Form B

Contacts

  

N/O = Normally open   1 N/O

N/C = Normally closed  

1 NC

Notes  

= safety function, by positive opening to IEC/EN 60947-5-1

Contact sequence  

Contact travel■ = Contact closed□ = Contact open  

Positive opening (ZW)   yes

Colour

  

Enclosure covers   Yellow

Enclosure covers  

Housing   Insulated material

Connection type   Cage Clamp

Notes   Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden,

Germany.

Accessories for the Cage-Clamp terminals from Wago:power comb, gray, Wago

Article No. 264-402

Technical data

General

Standards   IEC/EN 60947

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30

Ambient temperature  °C -25 - +70

Mounting position   As required

Degree of Protection   IP66, IP67

Terminal capacities 



02/07/2019 Eaton 116704 ED2019 V52.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - LS-11A Position switch, 1N/O+1N/C, rounded plunger, 1mm/3mm Part no. Catalog No. Eaton Catalog No.
PAGE 2
Solid mm Flexible with ferrule Contacts/switching capacity 2 1 x (0.5 - 2.5) mm 2 1 x (0.5 - 1.5) Rated impulse withstand voltage Uimp V AC 4000 Rated insulation voltage Ui V 400 Overvoltage category/pollution degree Rated operational current III/3 Ie A 24 V Ie A 6 220 V 230 V 240 V Ie A 6 380 V 400 V 415 V Ie A 4 24 V Ie A 3 110 V Ie A 0.6 220 V Ie A 0.
PAGE 3
10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated. 10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated. 10.2.7 Inscriptions Meets the product standard's requirements. 10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated. 10.4 Clearances and creepage distances Meets the product standard's requirements. 10.
PAGE 4
Degree of protection (IP) IP67 Degree of protection (NEMA) 4X Approvals Product Standards IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking UL File No. E29184 UL Category Control No. NKCR CSA File No. 12528 CSA Class No. 3211-03 North America Certiﬁcation UL listed, CSA certiﬁed Degree of Protection IEC: IP66, 67, UL/CSA Type 3R, 4X (indoor use only), 12, 13 Dimensions ① Tightening torque of cover screws: 0.8 Nm ±0.